Used F. Zimmermann Fz 30 for sale (50,806)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Codpszaz Tkofx An Negu Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Csdpsd Nnwlsfx An Negu Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: used, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 02/2026, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2019, Vehicle no.: 061-26 Langendorf Tipper Box Body Model SKA 24/30 * First registration: 03/2019 * BPW axles * Lift axle * Drum brakes * Tyres approx. 60-70% * Unladen weight: 5,500 kg * Payload: 33,500 kg * LED work lights * Rolling tarp Cgsdpfxoyrvnyj An Nju * Chassis steel * Body: aluminum box * (WITHOUT support legs) Viewing possible at any time during our opening hours, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded upon receipt of the confirmation of arrival. Company logos and advertising on the vehicles may have been digitally altered in the photos. No guarantee is given for the function of extras. All information provided without guarantee – subject to errors, changes, typing mistakes, and prior sale. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our Terms and Conditions and ensure you read them.

Condition: used, machine/vehicle number: XLK30122740032151, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2004, total length: 9,790 mm, total width: 2,450 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,790 mm, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Brakes: drum brakes Cjdpfoytbv Sex An Negu Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.800 kg Carrying capacity: 35.200 kg GVW: 39.000 kg Identification Registration number: OH-45-RP

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/1996, total length: 10,250 mm, total width: 2,500 mm, wheelbase: 8,630 mm, color: other, Year of construction: 1996, Make axles: BPW Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Cedpfx Ansy Nlf Do Nogu Rear axle 3: Max. axle load: 9000 kg Empty weight: 4.110 kg Carrying capacity: 34.890 kg GVW: 39.000 kg Registration number: ON-35-DX

Condition: used, machine/vehicle number: XLK301227Y0028427, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2000, total length: 9,460 mm, total width: 2,450 mm, wheelbase: 7,520 mm, color: other, Year of construction: 2000, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.800 kg Cgedeyr Nm Nepfx An Nou Carrying capacity: 35.200 kg GVW: 39.000 kg Registration number: OG-79-JS

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Cgsdpsvictmjfx An Nou

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle number: G400133 En route to our premises in Kaufungen - Kassel, Germany, available immediately. For more information, please contact Luis Lucena. Low-bed trailer LANGENDORF SATÜ 30 - 10.0 m with wheel recesses Year of manufacture: 2020 Remote control 3 axles - 2 steered - 1 liftable Length: 13,900 mm Loading area: 10,000 mm Technically permissible total weight: 48,500 kg Unladen weight: 11,960 kg Financing example: Codpsy A Uxajfx An Nogu * Internal number: G400133 * Purchase price: €65,900.00 * Down payment: 10% * Term: 60 * Monthly installment: €1,025.02 Residual value: €11,380.00 If you are interested in this offer or would like to tailor it to your needs, please contact us via Mr. Enchev. We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m - Overband magnet - Hydraulic drive (self-propelled) Codpfoyxkwqsx An Negu - Central lubrication Machine is overhauled and immediately available.

Condition: used, machine/vehicle number: XL962000070002485, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, wheelbase: 7,460 mm, color: other, Year of construction: 2007, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Drum brakes = More information = Cjdpfx Ansyhb Dlj Njgu Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Registration number: OJ-12-YP

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 212 h, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 1,585 mm, fuel type: diesel, mast type: triplex, construction height: 2,338 mm, fork carriage width: 1,260 mm, empty load weight: 4,440 kg, drive type: Diesel, construction width: 1,450 mm, Rough Terrain Forklift Load Center: 500 Mast Type: Triplex Technical Condition: New Front Tire Size: Solidal 12 SL R4 Off-road Tread GESA Cgsdewqtyfepfx An Nju Front Tire Condition: 80 - 100% Rear Tire Size: Solidal XTra 27x10-12 SKS Off-road Tread GES Rear Tire Condition: 80 - 100% Battery Voltage: 12V Load Backrest, 3rd Valve, 4th Valve, Heater, Full Cabin, CE Certificate, Image may be a sample photo Paddle 100x45x1200 mm Exterior Mirrors Left and Right, Mechanically Suspended Plastic Seat, Road Lighting Halogen Front/Rear, Reinforced Battery Capacity 12V 110AH 750A, Radiator Metal Protective Grid, Ecostop, Raised Vertical Exhaust on Counterweight, Load Cushioning, Load Backrest Width 1260 mm LB1260, Mast Tilt 1210 Forward/Back, Rear Mud Flaps Rubber, Easy Link STD Module, Front Fender Extensions Metal, Total Width 1400 mm MI

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,417 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,400 kg, number of axes: 4, This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. • Axis speed (X/Y/Z): 4 / 4 / 6 m/min • Position reading accuracy (X/Y/Z): 0.1 µm • C-axis (standard) rotation speed: 0–100 rpm • Work tank size: 1200 x 800 x 500 mm • Worktable size: 800 x 600 mm • Max electrode weight: 100 kg • Max workpiece weight: 1000 kg • Workpiece dimensions: 1000 x 700 x 400 mm Cedpfjx Nr N Nox An Nogu • Dielectric unit capacity: 750 l • Generator type: ISPG • User interface: AC FORM HMI • Power supply: 3 x 380 V, 3-phase, 50 Hz

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Csdpfx Ansx S Hmzo Njgu Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Csdpfx Aek Abuion Nogu Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Cgjdpfx Anek Aa Uks Nou

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Csdpfxjt D R R Sj An Negu Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 71,480 km, power: 167 kW (227.06 HP), first registration: 08/2002, overall weight: 13,000 kg, fuel type: diesel, color: red, axle configuration: 4x2, empty load weight: 12,180 kg, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2002, operating hours: 2,161 h, Equipment: differential lock, hydraulics, low noise, Fire Brigade – Turntable Ladder Vehicle: - Iveco - Eurocargo 130 E 24 - First registered: 08/01/2002 - 6-cylinder Iveco diesel engine, 5681ccm; 227 hp - 71,480 km; 6,864 engine hours - Differential lock - Auxiliary drive - 6-speed manual transmission - 3 seats - External power supply 220V - Siren / flashing lights - 989cm x 235cm x 335cm (l x w x h) - Unladen weight: 12,180 kg; permissible total weight: 13,000 kg Turntable ladder superstructure: WARNING: TURNTABLE LADDER SUPERSTRUCTURE CURRENTLY NOT FUNCTIONAL – ELECTRICAL MALFUNCTION! - Camiva / Metz - EPAS 30M Iveco - 33m height - 2,161 operating hours - Hydraulic outriggers - Basket in lying position, max. 3 people, 270 kg - Stand-alone and basket controls - Storage compartments + equipment holders A video of this offer can be found at: You can find our entire vehicle inventory at: Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale! Cgjdpfx Ajqxt Nuon Nju

Condition: used, maximum load weight: 35,280 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 05/2014, next inspection (TÜV): 06/2026, Equipment: ABS, Krone 3-axle container chassis, SD, lift axle, BPW axles, Highcube, mounts for 20ft, 30ft, 40ft containers, disc brakes, air suspension, rear extension, EBS, ABS Cgedox Ep Nrjpfx An Neu Roadworthiness inspection valid until 05/26 2 units available

Condition: used, Year of construction: 2000, machine/vehicle number: 0-201-24-5315, functionality: fully functional, operating hours: 999,999 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 150 mm, number of axes: 3, number of slots in tool magazine: 12, controller manufacturer: HOMAG, actuation type: electric, total height: 2,650 mm, total length: 5,750 mm, total width: 4,000 mm, overall weight: 5,885 kg, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, The machine is in working order and is being replaced due to the purchase of a new machine. Cgjdpfey Tmc Eex An Nsu The price includes an associated vacuum pump.

Condition: not inspected (used), Year of construction: 1970, functionality: unexamined, machine/vehicle number: 5206, grinding wheel diameter: 240 mm, table length: 450 mm, table width: 250 mm, power: 6.08 kW (8.27 HP), input voltage: 380 V, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Magnet dimensions: 450 x 250 mm Grinding wheel diameter: 240 mm MACHINE DETAILS Operating voltage: 380 V Connection: 6.08 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 1,000 kg EQUIPMENT Cgedpfx Asy D Tvtsn Nju Side table Suitable accessories Magnets Three-jaw chuck Vice (jaw width: 60 mm) External reference: 21

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Cgedpfjufgb Iox An Nou

Condition: used, axle configuration: 2 axles, loading space length: 74,600 mm, loading space width: 22,700 mm, loading space height: 13,800 mm, Year of construction: 2000, Equipment: ABS, = Additional Options and Equipment = - Rear air suspension - Front air suspension = Notes = Codpfoy Srukox An Njgu For vehicle inquiries, please contact Mr. Seidel (by phone). Trailers LTD SDC 30/2 tipping trailer. Additional rear work lights, BPW axles, Wabco ABS, drum brakes, first axle liftable, central lubrication, air suspension, tire tread depth: 1st axle 11-15mm, 2nd axle 9-13mm, cargo area dimensions: length: 7,460mm, width: 2,270mm, height: 1,380mm. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our website. ... Errors, changes and prior sale excepted!!! = Further Information = gross vehicle weight: 30,000 kg Please contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 2418, functionality: fully functional, Availability: Mid-July 2026 The machine can be inspected and demonstrated at the customer's site. Last major inspection by "HEBROCK" in 8/2024 - Machine equipped with Pro-Face Panel touch control - Glue application via glue roller and granulate container - Quick-heating glue pot - 2 additional glue stations Csdpfey N U S Hjx An Njgu - Coil material 0.4 - 3 mm incl. automatic coil separation - Strip material max. 8 mm - Minimum workpiece width: 90 mm - Minimum workpiece thickness: 10 mm - Minimum workpiece length: 220 mm - Feed rate: 10 m/min - Jointing unit (counter-/co-rotation) with 2 DIA tools - Pressure unit with 4 pressure rollers - End trimming unit 0.37 kW, 15,000 rpm - Flush/chamfer/radius milling unit 2 x 0.37 kW, 15,000 rpm - Radius scraper unit - Corner rounding unit - Surface scraper unit - Buffing unit - "RIEPE" release agent spray unit - "RIEPE" cleaning agent spray unit - Extendable workpiece support - Chip collection box

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 01/2010, suspension: air, color: red, Year of construction: 2010, Axle configuration Make axles: SAF Brakes: drum brakes Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Rear axle 3: Max. axle load: 10000 kg; Steering Weights Empty weight: 6.100 kg Carrying capacity: 36.900 kg GVW: 43.000 kg Maintenance, history and condition APK (MOT): tested until 08/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = Codpfx Aoxxkqhjn Negu - Air suspension - Twist-locks

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: Series 21i-M, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis CHIRON FZ 08 W was manufactured in 2001. It features a maximum spindle speed of 18,000 rpm and a robust tool interface with HSK-A40. The machine includes integrated pallet changer for efficient workpiece handling. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08 W vertical machining centre we have for sale. Contact us for further details regarding this machine. • Condition: Machine is no longer functional and can only be used as a supplier of spare partsElectrical data • Kind of current: 3/N/PE ~ 50/60 Hz • Working voltage: 400 V • Control voltage: 230/24 V • Rating: 12 kVA • Rated current: 17 A • Fuse: 20 ASpindle • Spindle type: Water-cooled motor spindle • Max. torque: approx. 15 NmOther machine details • Workpiece changing system: Integrated pallet changer (W-type) Cedpfx Anjy Ex H Hs Njgu • Maintenance intervals noted: 8h, 50h, 200h, 500h, 2000h, 6000h • Lubrication requirements: INSK K11 / ALKANIA 2 (Shell)