Used Fein Balancer for sale (920)

Condition: used, functionality: fully functional, machine/vehicle number: 33530, mileage: 239,900 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 15.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Chassis designed for a 28-ton weight variant, OM471 engine, transmission oil cooler, disc brakes, Active Brake Assist, High Performance Engine Brake, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 tons, 3-leaf springs, air-suspended rear axle, rear axle 13 tons with differential lock, steerable and liftable 9-ton trailing axle, regulated water pump, transmission lock for auxiliary drive, daytime running lights, light sensor, trailer coupling Ringfeder (D40), tires: front and rear axles 385/65R22.5, middle axle 315/80R22.5, fuel tank 290 liters + 60 liters AdBlue, length/width/height/mm: 9,200/2,550/3,650; M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, navigation system, tinted windshield, sunroof, heated and electrically adjustable mirrors, electric windows, comfort central locking system, driver's comfort suspension seat, passenger's comfort suspension seat, multifunction steering wheel, reversing warning system combined with hazard lights, digital tachograph VDO, trip computer, 12/24 V sockets in the passenger footwell, circuit breakers, pre-equipment for toll collection, air conditioning, refrigerator, cruise control, attention assist, traffic sign assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof-mounted rotating beacons, sun visor. Knsdpoz Hbr Nofx Adyec Total volume 15.5 m³, usable volume consisting of an 800-liter fresh water tank and a 13 m³ sludge tank, tank wall thickness 6 mm, tank emptying via free discharge or by pressing with the vacuum pump, floor flap over the entire cross-section to be opened upwards hydraulically, mechanical swivel locks, sealing of the closure base in NBR, one baffle in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide valve, sludge tank level indicator with float and external scale (division of 500 L), sight glass for water tank, discharge skirt made of stainless steel, vacuum pump GardnerDenver RFW 200 DVL (1250 m³/h) with 685 operating hours, hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (80 l/min at max 175 bar) with 681 operating hours, hydraulically driven, stepless pressure regulation, small manual HD hose reel with approx. 40 m HD hose DN13 and spray gun (with swivel joint), 5x LED work lights (one at the rear and two on the right and left), LED rotating beacon at the rear of the superstructure, suction hose boxes on the right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/balancing/discharge, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, trailer suction line, trailer hydraulics.

Condition: new, *IMMEDIATELY AVAILABLE* Features: - V2A screws - 30mm aluminum side walls - Adjustable lashing eyes Net price: €2,516.81 / Gross price: €2,995.00 Article number: K71313301545.01 Technical data: • Brand: Koch-Anhänger • Model: 7.13 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 300 x 150 x 45 cm • External dimensions (L x W x H): 433 x 204 x 96 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,300 kg • Tare weight: 280 kg • Payload: 1,020 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/70R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Double-walled, anodized aluminum side walls, 30 mm, with integrated aluminum frame • Side wall with cargo securing system; accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A stainless) • Elaborate longitudinal supports (2 longitudinal beams) • Stable screen-printed floor, non-slip (birch wood, waterproof glued) • Very stable latches for the rear door made of V2A stainless steel (unique) Kodpfjzy Afaex Adyjnc • Maintenance-free rubber spring axle, hot-dip galvanized • Shock absorbers + 100km/h approval • ALKO overrunning device and parking brake • Suspension and drawbar from well-known manufacturer ALKO • Reversing automatic • Brake cables standard with "Profi-Longlife" (plastic coating of the steel wire strand) • 2x chock with holder • Standard equipment includes balanced 1A brand tires • Large 195/70R14 tires, balanced and capable of 100 km/h • Safety indicator on the coupling • Steel fenders • Rear door can be easily removed • 13-pole plug • Reversing lights • Large, dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Fasteners completely M8 stainless steel (V2A stainless) • Clear control panel with the most important data (tire pressure, cable layout, etc.) • Including 10-year Koch warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Knsdez Imdaspfx Adyoc Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: used, ABA precision surface grinding machine with accessories, machine used very little. Magnet size: 400x250 mm Infinitely adjustable grinding spindle Grinding wheel dressing device (Diaform) Automatic feed Knjdpfez Ehmdox Adyoc Feed rate infinitely adjustable Inch mode Coolant system with belt filter system Dust extraction for wheel dressing device Balancing device, centering arbor, Wheel removal device Tool cabinet with various new grinding wheels Operating manual.

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 831102, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 480 mm, cutting width (max.): 780 mm, control type: manual, actuation type: manual, rotational speed (max.): 700 rpm, rotational speed (min.): 1,400 rpm, total height: 2,460 mm, total length: 1,490 mm, total width: 900 mm, overall weight: 720 kg, table height: 970 mm, year of last overhaul: 2026, roll diameter: 800 mm, saw blade length: 5,600 mm, Equipment: documentation/manual, motor brake, Dear customers, we currently offer a fully overhauled bandsaw from the HEMA brand. The machine has been repainted in new, current original colors, and the electrical system, including the emergency stop system, is completely new. Mechanical parts were either purchased from the original manufacturer or manufactured in-house. The motor has been completely overhauled. Kjdpfx Aez Eh S Tjdyonc Here are some additional technical specifications of the machine: - Precision roller guide at the top and bottom, upper guide height-adjustable via handwheel, vibration-damping wheel suspension - New aluminum disc wheels with vulcanized and ground rubber linings, dynamically balanced - Stand – LEFT-hand version - With precision table swivel device with handwheel and rack and pinion - Pole-changeable motor with 2 cutting speeds, safety brake, and brake air system - Emergency stop switch with undervoltage release - Aerodynamically optimized extraction port The scope of supply includes a set of saw blades from HEMA and other machine-specific accessories. Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment Kodpfxsz Hmn Ne Adyonc • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Knsdpfx Adjq H Sqdjyoc Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: used, Double gantry-type machining center with two independent operating heads working on independent tables. • Year of manufacture: 2012 • Number and type of spindles / Machining heads: Two independent, liquid-cooled 5-axis heads (typically 2+2 compact electrospindles per head) operating up to 24,000 RPM. • Installed power / Electricity: 50 kW / 380 V / 50 Hz • Air consumption: Standard operating requirements for Bacci multi-axis pneumatic clamping and extraction circuits (typically a nominal pressure of 6 to 7 bar). • Machine weight: Approx. 6,000 kg • CNC / Control system: Industrial OSAI CNC system with high-speed servo drives. • Software included: Complete, featuring PITAGORA 3D optimization and simulation software for dynamic workload balancing. • Material handling integration: Fully integrated automatic hopper feeder system for synchronized loading and unloading of workpieces. • Data and system backups (critical advantage): For a seamless commissioning and startup, we include: Kjdpezmhz Hefx Adysnc o Complete copies of all parameter files for servopacks and inverters/frequency drives. o Full copies of the OSAI system BIOS and hard drive clones. o Backups on dedicated PCs containing Pitagora configurations. o Complete original documentation, both in physical and digital formats.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Knjdowiqq Sjpfx Adyoc Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Rear view camera - Sun visor EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP TMK 22m³ Rectangular dump body tipper Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel arrangement: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8-liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment - Engine & Drivetrain Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine PTO SAE 1410 Transmission oil cooler Two-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver seat Passenger seat with adjustable backrest Kjdpfx Adoz Erufeyonc Air conditioning with sun sensor Digital 12-inch instrument panel Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety Equipment Electronic Stability Program (ESP) ABS / EBS Hill start assist Emergency braking assist (AEBS) Side collision warning Driver alertness system Adaptive cruise control Rear view camera Reversing warning LED headlights LED daytime running lights Automatic headlights Additional Equipment Tipper equipment: EuromixMTP TMK 22m³ Rectangular dump body tipper Your benefits • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: ...

Condition: new, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Speed limiter - Air conditioning - PTO - Rear view camera EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP SCORPION SCO 25-59 Unladen weight: approx. 12,050 kg Payload: approx. 19,950 kg Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel configuration: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8 liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment: Engine & Drive Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic transmission Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine auxiliary drive SAE 1410 Transmission oil cooler Twin-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel configuration 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver's seat Co-driver's seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument cluster Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety Equipment Electronic stability program (ESC) ABS / EBS Hill start assist Emergency braking assist (AEBS) Side collision assist Driver attention assist Adaptive cruise control SCORPION SCO 25-59 ROLL-OFF DUMP BODY Robust and powerful roll-off dump body for daily use in construction, waste disposal, recycling and container Your advantages Kedpfxjz D Utuj Adyonc • Ready for immediate use: concrete pumps, concrete mixers, dump trucks, roll-off dump bodies • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila...

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,100 mm, Fixed table 3100x1000 mm 1 X-axis transmission: rack and pinion (dual drive), Y, Z axes: ball screws Pressurized linear guides X, Y, Z axis speeds up to 35 m/min X, Y, Z axis thrust: max. 10000 N X-axis covers with non-walkable telescopic guards Hydraulic system, power supply, and wiring Direct hydraulic balancing system (double cylinder) Refrigeration unit 6000 W Hydropneumatic and electrical cabinets (Rittal), floor-mounted Work area lighting; machine and spindle hour meters External operator station, floor-mounted – mobile operator panel External spindle coolant system, low pressure C-axis with torque motor Universal C-axis head with continuous positioning and torque motors Electromandril 33(25) kW - 640(480) Nm - 8000 rpm - ISO 50 CNC Heidenhain iTNC 530 HSCI, complete with operator panel with 15" video screen, positioned on the front of the machine Portable control panel with HR 510 handwheel Ethernet network connection Voltage 400 Vac Frequency 50 Hz 24-position ISO50 disc-type tool magazine with tool changer arm, complete with support and management software, positioned at the X-axis travel end (quantity 1) 2 longitudinal screw conveyors for chip removal + 1 transverse belt conveyor Protective enclosures including panels and sliding door in sheet metal with a Lexan window, meeting CE safety standards. Top cover included Knjdpfey Uvrfox Adyjc Partition wall and software preparation for tandem machining Medium-pressure coolant system (15 bar) inside the spindle with bag filter Air blow through external nozzle on the spindle External mist-type tool cooling system Digital probe Renishaw RMP60 Fixed laser presetting station BLUM, including Blum measuring cycles + zeroing sphere Machine is supplied with CE declaration of conformity and manuals. All technical data shown are indicative and may be subject to change without notice and therefore should not be considered binding.

Condition: new, Year of construction: 2026, Table design: -High performance -Belt sanding unit with adjustable height from 0-90° -Maximum usable surface area for surface sanding -Belt adjustment with fine adjustment Combined belt/disc sanding machine -Longitudinal guide for material guidance -Perfectly balanced and with low vibration -Connection on both sides for dust extraction, Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 sanding belt standard (brown), grit 80 Kjdpjhhiaaofx Adysnc -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional cost for special equipment/option: - Machine stand, emergency stop button, brake and dust extraction / €2,260 (item 330.370) - Machine stand, emergency stop button and brake / €1,030 (item 330.365) - Machine stand with water immersion container / €360 DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Motor, three-phase, 400V with frequency inverter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Saw band dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency inverter Digital speed display Continuously variable belt speed Balanced band pulleys Hard rubberized running surfaces Kjdoir Ey Iepfx Adyonc Hardened and ground guide jaws LED work light Height-adjustable guide arm Machine color RAL 7005 / RAL 7035 12 months warranty for single-shift operation OPTIONAL, article no. 410.020 Machine price € 15,450,- including minimum quantity lubrication and length stop DELIVERY: FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, overall weight: 19 kg, control type: manual, actuation type: manual, fuel type: electric, torque: 5 Nm, cutting height (max.): 305 mm, cable length: 4,000 mm, protection type (IP code): IP55, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, saw band length: 1,710 mm, saw band speed: 1,500 mm/s, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, NEW | 100% EUROPEAN PRODUCTION | DIRECT FROM MANUFACTURER The PBS300 is a professional portable bandsaw for beams, structural timber, solid wood and complex wooden components. With a cutting height of 305 mm and a weight of only 19 kg, it combines substantial cutting capacity with excellent mobility. Compatible with 6–13 mm blades, it handles tight curves, intricate contours and precise straight cuts in large timber sections. Ideal for carpentry, timber framing, joinery, workshops and construction sites. A practical tool for independent craftsmen and larger businesses alike, ready whenever precision and efficient cutting are required. BUILT ON EXPERIENCE Drawing on over 10 years of industry experience and feedback from thousands of direct customers worldwide, Astra Pro develops purpose-built woodworking tools. Our philosophy: professional equipment should be precise, reliable, easy to operate and affordable, without unnecessary complexity or investment. PRECISION CAST ALUMINIUM WHEELS The Ø203 mm wheels are cast from EN AC-43300 (AlSi9Mg) aluminium alloy according to EN 1706, with optimised mass distribution and reinforced geometry. Knsdpfsv Tcuxox Adyjc Precision turning and dynamic balancing reduce rotational imbalance and vibration, supporting smooth operation, stable blade tracking and accurate cutting. DUAL BLADE GUIDANCE SYSTEM On one side, steel-and-aluminium guides feature precision EDM-machined grooves. Their 180° reversible design allows a second groove to be used, extending service life. On the opposite side, triple-bearing guides with standard 696 C3 bearings provide controlled blade support with low rolling friction. Together, both systems help reduce blade heating, friction and premature wear, supporting accuracy and longer blade life. ENGINEERED SIMPLICITY Blade tensioning and lower-wheel tracking adjustment are integrated into one mechanical system. Setup is intuitive, precise and straightforward. The frame uses carefully selected aluminium alloys, precision TIG-welded for durable joints. Potential failure points are minimised through thoughtful engineering. Routine maintenance is largely limited to cleaning, inspection and adjustment. INDUSTRIAL DRIVE & SERVICE A 0.75 kW industrial induction motor, 230 V / 50 Hz, S1 continuous duty, delivers dependable performance with low maintenance requirements. Standard blades, 696 C3 bearings and replaceable motor capacitors are locally available, helping minimise downtime. Original spares and accessories are supplied by Astra Pro. CUSTOMER FEEDBACK "Game changer for us." "What takes a lot of time and energy now is a 7-minute cut. I absolutely love it." "We use it all the time." "Amazed how it improved work." TECHNICAL DATA Model: PBS300 / T305XT Condition: New Cutting height: 305 mm Wheels: Ø203 mm, EN AC-43300, EN 1706 Blade: 1710–1712 × 0.65 mm Widths: 6 / 8 / 10 / 13 mm Guides: Reversible EDM grooves; triple-bearing 696 C3 Motor: 0.75 kW, 230 V / 50 Hz, S1 Weight: 19 kg 100% EUROPEAN PRODUCTION Every machine is manufactured entirely in Europe and individually hand-assembled in Poland. Declared dispatch: 3 working days from order confirmation. DISTRIBUTION OPPORTUNITIES Specialist dealers can expand their range with a distinctive machine addressing real, underserved market needs.

Condition: used, functionality: fully functional, Grinding wheel flange with counter flange and balancing weights Two-part, consisting of: • Flange cone with cone featuring the marking 508x10 - 90x203.2 and 015 022 001 0 • Counter flange with marking 610x10 - 110x203.2 and 015 333 001 0, as well as mounted adjustable balancing weights Precision grinding wheel mounts for Karstens K56 external cylindrical grinding machine, wheel bore H 203.20, large cone 60 mm 3 grinding wheel flanges with counter flange and balancing weights available Knedpfoy Nlh Ejx Adysc The flanges are used. Price negotiable. Our asking price is €540 net, ex works, plus packaging costs. All technical data is subject to printing errors and omissions. Sale exclusively to countries within the EU.

Condition: used, Year of construction: 2021, operating hours: 198 h, Equipment: all wheel drive, Komatsu WA 70M-8E0 Wheel Loader | Year of Manufacture 2021 | Only 198 Operating Hours | Top Condition Vehicle Data: * Manufacturer: Komatsu * Model/Type: WA 70M-8E0 * Category: Wheel Loader Knsdo Aa Eq Aepfx Adyec * Year of Manufacture: 2021 * Operating Hours: 198 hrs * Power: 46.2 kW (approx. 63 hp) * Color: Yellow * Permissible Total Weight: 6,000 kg * Axles: 2 * Tires: 15.5/60-18 (Tread Depth: Axle 1: 50%, Axle 2: 50%) Equipment & Highlights: * Attachments included: Pallet forks + Original Komatsu bucket (Type: 42U-70-40110) with 0.85 m³ capacity * Comfort & Cabin: Integrated radio with USB connection for comfortable operation * Tire Condition: Approximately 50% tread remaining all around (Size 15.5/60-18) * Special Features: Emissions class "Low Noise" - ideal for use in urban or noise-sensitive areas. ----For sale is an absolutely new and well-maintained Komatsu WA 70M-8E0 wheel loader from the year 2021 with extremely low operating hours of only 198! The machine is in excellent optical and technical condition and is ready for immediate use for your next project. With a permissible total weight of 6,000 kg and a powerful 46.2 kW engine, the wheel loader offers the perfect balance between compactness and strong lifting power. The machine can be inspected and tested on our premises after prior arrangement. We look forward to your contact if you have any questions or are interested!----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us!----We speak the following languages: German, English and Russian!----No liability for printing and typesetting errors, changes, prior sales and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the processing and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and seriousness. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day licenses / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Kodpfez Ehvxsx Adyjnc

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Knsdjvvi N Iepfx Adyoc

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Knodpfx Asvvkipsdyoc

Condition: new, functionality: fully functional, fuel type: gas, fuel tank capacity: 70 l, color: red, empty load weight: 117 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BPM 100 | Hand-Push Crack Sealing Machine for Asphalt Repair & Maintenance The TICAB BPM 100 is a professional hand-push crack sealing machine designed for efficient asphalt crack filling, joint sealing, pothole edge repair, and preventive road maintenance. Compact, reliable, and easy to operate, it is the perfect solution for both urban and industrial pavement repair works. Engineered for contractors, municipalities, and road maintenance crews, the BPM 100 ensures precise application of hot bitumen, crack sealant, or asphalt mastic, helping extend pavement service life and reduce long-term repair costs. Key Features ✔ 70 L tank capacity for bitumen, crack sealant, or asphalt mastic ✔ Efficient heating system (diesel or propane) ensures stable and consistent material temperature ✔ Hand-push design for excellent maneuverability and easy operation in confined areas ✔ Fast heating and ready-to-use performance for quick jobsite deployment Kodex U Atvepfx Adyjnc ✔ Durable construction for intensive daily use in demanding environments ✔ Compact size ideal for urban maintenance and small repair teams Ideal Applications • Asphalt crack sealing and joint repair • Driveways, sidewalks, and bike paths • Parking lots and industrial pavements • Municipal streets and highways • Pothole edge reinforcement • Preventive road maintenance programs • Small and medium-scale asphalt repair works Built for Professional Road Maintenance Its precise heating and application system ensures high-quality sealing, preventing water penetration and further pavement deterioration. The TICAB BPM 100 is widely used by road contractors and municipal services looking for a reliable and cost-effective solution for asphalt maintenance. Why Choose TICAB BPM 100? • Simple operation with high productivity • Reliable heating system for consistent material performance • Compact and mobile design for any jobsite • Reduced maintenance costs and long service life • Professional results for crack sealing and asphalt repair The BPM 100 is the perfect balance between efficiency, mobility, and durability for everyday road maintenance tasks. Request a Quote Today Contact us for pricing, delivery options, and technical specifications. TICAB BPM 100 is available for fast production and worldwide shipping.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, EURO-Jabelmann bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – manufactured in 2022 – like new, including accessories. Ksdpfsz Tda Rjx Adyonc For sale is a practically new bagging scale, model TN 260, from EURO-Jabelmann (manufacturer based in Itterbeck, Made in Germany), with an upstream bulk material hopper measuring 1,500 × 1,500 mm, manufactured in 2022. The scale doses and fills bulk materials such as potatoes, onions, vegetables, or firewood directly from the storage hopper into bags. Condition: – Like new, barely used – Fully functional – Inspection and test run possible by arrangement Included in delivery: – Bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – “Gantry” for hand sewing machine with roller track, roller mechanism, and aluminum spring balancer (load capacity 4–6 kg) – new price €825 net – 2x hand sewing machine, Union Special 4000A (bag sewing machine, single-thread chain stitch, with thread separator, 90 W) – new price €1,425 net each New price of the scale without accessories: €18,950 net. New price of the entire package: €22,625 net. Price: €10,900 net plus VAT for the complete package, negotiable – VAT can be shown separately. Collection & Shipping: – Location: 31848 Bad Münder am Deister – Loading assistance is provided – Shipping via freight forwarder is possible for an additional charge.

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Kedjv Dg A Uspfx Adyjnc Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: new, MKF Adjustable Crane Traverse with Motor Adjustable traverses are used when trailer distances and load centers of gravity vary. Features & Highlights: Central suspension point: Heavy-duty triangular eye for the crane hook. Electrical center of gravity correction: Electromotor-driven system (connected via a 230V CEE plug) for balancing uneven loads directly at the push of a button. Ergonomic control panel: Height-adjustable control unit panel on a vertical rail guide with an energy chain to protect the cables. Clear control: Control elements for the locking pin (up/down/invalid position) and center of gravity correction (including an LED display for the center position), as well as a central emergency stop switch. Includes transport frame: Robust, mobile base frame made of square steel for safe and compliant storage. Technical data: Manufacturer: MKF Helmut Möschl GmbH Payload: 9,000 kg Weight: 550 kg Year of manufacture: 11/2002 Kjdpozwmckjfx Adyenc Number: R 6906 Type: 743 4954 13 Dimensions, traverse: 1920 x 400 mm Frame: 2670 x 1250 x 1880 mm New price: €10,700 “Everything from one source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, mileage: 1 km, power: 330 kW (448.67 HP), fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 39,000 mm, fuel: diesel, fuel tank capacity: 960 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, tachograph, - 2 fuel tanks - Adjustable seats - Air seats - Autoradio - CD - Drive mode select - Front seats manual adjustment - Full-size spare wheel - Keyless entry system - Multifunction steering wheel - Power windows front - PTO - Spare wheel Knsdjz I Upqjpfx Adysc - Spare wheel holder - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights Built for Long-Distance Transport Where Reliability Matters Modern transport companies demand more than horsepower alone. Whether hauling fuel tankers, bulk trailers, container chassis, chemical tankers or general freight, fleet owners need equipment that delivers maximum uptime, fuel efficiency and dependable performance every day. The Mercedes-Benz Actros 2045 S 4x2 has been engineered to meet these expectations. Combining the proven Mercedes-Benz OM460 engine with Mercedes PowerShift 3 transmission, a robust 4x2 driveline and the renowned Grounder specification, this tractor offers the perfect balance between performance, operating efficiency and long-term reliability. Designed for regional distribution, international transport and demanding export markets, the Actros 2045 S is ready to support businesses where every kilometre matters. Powered by the Proven Mercedes-Benz OM460 Engine At the heart of the Actros 2045 S sits one of Mercedes-Benz's most respected heavy-duty diesel engines. The OM460 is a 12.8-litre inline six-cylinder engine producing 330 kW (449 HP) and 2,200 Nm of torque, providing smooth power delivery and excellent fuel efficiency while maintaining the durability expected from Mercedes-Benz. Its proven EURO III configuration remains highly popular throughout international export markets thanks to its straightforward maintenance, worldwide parts availability and long service life. Engine Specifications: - Mercedes-Benz OM460 - 12.8-Litre Inline 6 Diesel - EURO III Emission Standard - 330 kW (449 HP) 2,200 Nm Torque - Reinforced Engine Mounts - Standard Exhaust Brake - Two-Cylinder Air Compressor - Cooling Package for Very Hot Regions Mercedes PowerShift 3 with PowerShift Advanced Efficient transport depends on smooth and intelligent power delivery. The Actros 2045 S is equipped with the Mercedes-Benz G230-12 automated gearbox, combined with Mercedes PowerShift 3 and PowerShift Advanced. Fast gear changes, Economy and Power driving modes and intelligent shift logic help reduce driver fatigue while improving fuel economy and maintaining excellent driving comfort during regional and international transport operations. Transmission Highlights: - Mercedes PowerShift 3 - PowerShift Advanced - 12-Speed Automated Transmission - Economy & Power Driving Modes - Single Disc Clutch - Transmission Oil Cooling Built for Professional Trailer Operations A reliable tractor starts with a reliable coupling system. This Actros is factory-equipped with a genuine JOST JSK37C fifth wheel, mounted on a reinforced mounting plate with a factory fifth-wheel bracket. The manually lubricated fifth wheel ensures dependable coupling performance and long service life while supporting a wide variety of transport applications, including fuel tankers, container chassis, curtainsiders, bulk trailers and specialised semi-trailers. Engineered for Demanding Operating Conditions...