Used Flowcon Automatic Balance Valve for sale (29,121)

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Gedpfx Ajzwmr Ejanokb Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, rotational speed (max.): 3,520 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Used, very good condition Westfalia SA7-01-576 Separator, year of construction 1977. Packed in wooden crate to IPPC standard, ready to be shipped. - Brand new Time control box with Burkert valves and automatic controls - Performance 500 - 3.000 Ltr - self-cleaning - Motor 4 kw, 380V / 50 Hz - Start-switch including phase changer and emergency stop function - with Tools, Instruction Manual and Spare part list Gkodpfxozryq Rs Aanob - Made in Germany If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Gkedpfx Aoyln D Teanob

Condition: excellent (used), Year of construction: 2015, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift robot Year of manufacture: 10.2015 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Gjdpszy I Adofx Aanokb Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 6666 h in automatic mode Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: Closing of the pneumatic nozzle and dosing device Arburg Multilift ML-S robot Year of manufacture: 10.2015 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and safety housing Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included Gkodpfxjzxn Nns Aanjb 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 20 kg, Maximum Rotor Weight ---20 kg (44.1 lb) Gjdpfx Aasq T Riwsnekb Minimum Rotor Weight ---0.5 kg (1.1 lb) Maximum Rotor Diameter ---450 mm (17.72 in) Minimum Shaft Diameter ---5 mm (0.196 in) Maximum Shaft Diameter ---50 mm (1.968 in) Motor Power ---0.75 kW (1.01 HP) Maximum Balancing Speed --- 0 – 8000 RPM (Adjustable) Drive Unit ---Belt Bed Length ---700 mm (27.6 in)

Condition: ready for operation (used), Year of construction: 2001, Offered is a valve bag filling system (50kg) with connected palletizer. Bag type: valve bags (paper, PE or PP), filling weight: adjustable up to max. 50kg, piping system with integrated conveying screw / dosing screw, pneumatic bag clamping, weighing unit, discharge conveyor belt. Automatic layer palletizer - Ehcolo PM 400. Year of manufacture: 2001, capacity: up to approx. 400 bags per hour, incline conveyor / bag flattener, empty pallet magazine, complete machine enclosure. Inspection possible by arrangement. Gkjdjylzg Ujpfx Aansb

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen Gksdpfsznd Dyox Aansb - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 468-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 83 mm Shot weight: 2043 g Injection pressure: 1840 bar Dosing volume: 2245 ccm Clamping unit: Clamping force: 468 t Tie bar spacing: 830x830 mm Platen size: 1210x1165 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Gkodpfx Ajzy Ix Soaneb Robot interface Air valve x 4 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety guard Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 19800 kg Length/Width/Height: 8.80x2.00x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2020, condition: used, machine/vehicle number: E22SJ20072839180, The iCombiPro is the latest combination oven from RATIONAL. The iCombiPro 20-2/1 electric model with 20 GN 2/1 or 40 GN 1/1 trays is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant supervision. The super-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. The combination oven has been completely refurbished in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The iCombi Pro has only been used for 5834 operating hours! Approximate power consumption: 37 kW Manufacturer's recommended retail price: €30,739.49 net = €36,580.00 gross Request your best price. These are example photos of an identical model in comparable used condition. Actual photos will follow shortly. Our device service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded devices at fair prices. Professional and competent advice - before and after the purchase. Flexible shipping or self-collection options. Provision of operating manuals, connection diagrams & spare parts. Complete range of accessories at attractive prices. Condition: used, inspected, fully functional Technical data: W x D x H: 1082 x 1117 x 1872 mm Minimum door opening dimensions for transport W x H: 1200x1900mm Serial number: E22SJ20072839180 Year of manufacture: 07/2020 Max. loading quantity / tray: 5 kg Max. total loading quantity: 100 kg Weight of electric device: 325 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection value: 67.9 kW Power in steam mode: 54 kW Power in hot air mode: 66 kW Fuse rating: 100 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Further information: Temperature range: 30°C to 300°C Detects current cooking chamber conditions Recognizes the size, loading quantity and product condition and calculates the browning accordingly Learns which cooking habits are used most often and implements them Determines the ideal cooking path to the desired result MyDisplay - user-configurable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the device display Core temperature probe with automatic error correction in case of probe failure and positioning aid Door compartment glazed, energy-saving LED interior lighting Including energy consumption display Humidity control: percentage-accurate humidity measurement and adjustment Individual programming of at least 350 cooking programs with up to 12 steps Humidification adjustable in 3 stages Gkjdozwu U Iopfx Aanjb USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: Fast cooling of the cooking chamber Automatic adjustment to the installation location (altitude, climate, etc.) Device door with ventilated triple-glazed pane and swiveling inner pane Waste water fixed connection permissible according to SVGW Splash and spray water protection IP X 5 Separate solenoid valves for soft and hot water up to +30°C Automatic start time preselection adjustable with date and time Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to changes and errors.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Gjdpfx Aaezlktpenskb Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 685 kg, maximum load weight: 2,015 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, Rear Tipper, Electric Operation + Integrated Aluminum Ramps NEW VEHICLE Internal dimensions: 276cm x 170cm Side panel height: 30cm Loading platform height: 65cm Total weight: 2700kg Payload: 2083kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axles with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging the battery Integrated aluminum ramps in ramp compartment, 2.8T load capacity Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pole plug LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE STARTING IN FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) Gkjdpfxozxtgrs Aansb -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -Charger -Remote control -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on a tipped vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bow -High tarpaulin 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document €200 net. Images are for illustrative purposes and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers.

Condition: new, Year of construction: 2026, DCV11300 TC VIBER The DCV11300 TC VIBER is a high-performance industrial dust extraction unit designed for operation under demanding conditions in the woodworking and furniture industries. Equipped with advanced filtration, safety and energy recovery systems, it guarantees reliability, cleanliness and cost efficiency in every production facility. Main Advantages of the Machine Extraction capacity of 11,300 m³/h – effective removal of chips, dust and sawdust from multiple workstations. VIBER system – automatic, trouble-free filter shaking ensuring constant operating parameters. Gedpjudalwsfx Aanskb DAMAGE PROTECT module – mechanical protection of the impeller against damage caused by solid contaminants. TC housing – effective acoustic insulation and vibration reduction. REHEAT system – recovery of heat from the extracted air for energy savings. Construction and Technology The DCV11300 TC VIBER central dust extraction unit has been designed for many years of trouble-free operation. The heart of the system is an 11 kW motor with a dynamically balanced impeller, ensuring stable and quiet operation. The construction is based on a rigid steel frame with additional inspection doors, making operation and bag replacement easier. Precision and Work Efficiency The high suction velocity of 28–32 m/s and 64 polyester filters (5 microns) ensure effective air purification even in intensively operated facilities. The BIG-BAG system or metal containers on wheels allow for efficient waste removal. Application The DCV11300 TC VIBER is an ideal woodworking dust extraction unit for facilities: producing furniture and wooden components, with multiple workstations, using panel saws, edgebanders, sanders and saws, looking for a central solution (central dust extraction system). Standard Equipment Control cabinet with easy access, Complete set of polyester filters, VIBER system with an automatic cycle, TC sound-absorbing housing, REHEAT and DAMAGE PROTECT modules. Technical Specifications Power supply voltage — 400 V Motor power — 11 kW Rotational speed — 3000 rpm Capacity — 11,300 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Inlet / outlet diameter — 350 mm / 500 mm Filter material — Polyester, 5 microns / filter category "G" Number of filters — 64 pcs. Filter dimensions — Φ160 × 960 mm Overall dimensions — 1190 × 3160 × 2320 mm Net weight — 710 kg

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Gkedozvz Tbjpfx Aanjb Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: excellent (used), Balancing valve, shut-off valve, ball shut-off valve, ball valve, ball cock, pressure relief valve, shut-off valve, safety shut-off valve -Manufacturer: Kromschröder, shut-off valve safety shut-off valve with flange unused -Type: VSAV 50 / IF40 Gkodpfx Aasx R Swvoneb -Technical data: see photo type plate -Flange: DN 50 / bolt circle Ø 125 x 18 mm -Dimensions: 230/165/H280 mm -Weight: 5.5 kg/piece

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm Gedpfxozz Afie Aanekb z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. Gjdpfx Aaew H Aw Ssnjkb 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Year of construction: 2025, New demonstration machine! List price available upon request! The STANDARD – a generic term and the world’s best-selling saw of its kind – has been on the market for over 40 years. Its current highlights: absolute angular accuracy thanks to the double locking of the saw beam, the integrated strip stop for repeat cuts, and the integrated TRK extraction system. Two versions of the dust extraction system allow for limit values of significantly less than 2 mg of dust per m3 of air (TRK2) or significantly less than 1 mg/m3 (TRK1). Saw frame: · Manufacturing of the machine with precision parts to 1/100 mm · Solid, self-supporting, firmly welded, torsion-resistant saw frame · TRK2 Automatically adjusting aluminum slat grid with plastic supports · TRK1 Automatically adjusting wooden support panel · 17-point roller support with 3 brake pedals (Type 6224) · 5.15 m long, split center support at an optimal working height (Type 6224), with aluminum grids · Aluminum small parts support (1 pair), individually usable Saw beam: · Stable, durable saw beam steel construction Sawing unit: · Effortless operation thanks to a fully balanced sawing unit · Robust mounting of the motor carriage ensures high cutting accuracy · Powerful, high-torque 5.5 kW motor (7.5 HP) · Carbide-tipped circular saw blade 300/30 mm · Saw blade overhang 9 mm · Integrated stop for horizontal strip cuts · SUPERSILENT sound insulation to reduce saw blade noise · Mechanical motor brake Design, ergonomics: · Typical STRIEBIG product design · Functional and user-friendly ergonomics Assembly: Wall or free-standing assembly possible Saw blade: 300 mm, scoring, 60 teeth Cutting area: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm consisting of: 1.00 Cutting interface distance vert. 1000 mm 1.00 Language documentation DE 1.00 Saw motor Y-D, 400V, 50Hz, A05 TRK 4.00 Free-standing support complete 1.00 Small parts support aluminum complete (2-part) 1.00 Operating hour counter 1.00 Paper holder Availability: on request! Location: Rieth Godpfx Aaezx E Twsnjkb

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Gksdpfjnzh Uisx Aanjb Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: used, - RIS AG Series - Clean water at +1°C - External dimensions (W x D x H): 1500 x 2600 x 2300 mm - Tank volume: 3,000 L - Power: 5 kW - Power supply: 400 V - 3 Ph - 50 Hz - Maneurop refrigeration unit --- Type: Ris AG 30 --- Power: 380 V - 3 Ph - 50 Hz --- Serial number: 1299 --- Refrigerant: R22 - Pump flow rate (for information): from 4 m³/h at 4.5 bar to 12 m³/h at 3 bar - Store power for peak demand - Allows acceptance of warm return flows at the start of the cycle - Store energy cost-effectively, either by direct expansion or glycol water - Unit can be supplied with or without refrigeration group - Monobloc tank, ready for connection - Polyester tank insulated with polyurethane foam - Stainless steel 316L grid-type heat exchanger - Glycol water heat exchanger at -8°C or with a direct expansion refrigerant Gkjdpfx Aoy Ic D Ujanob - Regulation solenoid valve (glycol water version) or thermostatic expansion valve (direct expansion version) - Chilled water distribution pump with safety by-pass, flow regulating valve and pressure gauge - Agitators - Drain valve, overflow - Automatic water make-up - Return loop standby - Service hatches - Power and operation management electrical cabinet Overhauled equipment: units are serviced and prepared to order; delivery and collection times are arranged at the time of order (please request a price quote after overhauling).

Condition: refurbished (used), Year of construction: 2026, - The Trepko XPG 40 is a high-performance butter packing machine designed for automated packing of butter into various sizes. Known for its robust construction and outstanding reliability, this machine features advanced technology to ensure precise filling and wrapping. - Key attributes include: - Versatility: Suitable for different butter formats and packaging styles. - Efficiency: High-speed operation reduces production time while maintaining top quality. - User-Friendly controls: Easy to operate, allowing for quick adjustments and setup. - Hygienic Design: Constructed with easy-to-clean materials, adhering to food safety standards. - Durability: Built to withstand the demands of a busy production environment. - The Trepko XPG 40 is a trusted solution for manufacturers looking to enhance their butter packaging processes, ensuring both efficiency and quality. Format: 100 x75 x 30 mm Butter Infeed: Twin Screw Augers Packaging Material: Foil, Parchment Paper, Grease Proof Capacity: up to 90 packs/min Weight: 1600 kg Power: 2.2 kW Gkjdpszwli Ajfx Aanob Available: Immediately Condition Details: Fully overhauled and ready to be used Not used since renovation

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 150 mm, table width: 2,650 mm, table length: 32,000 mm, throat depth: 320 mm, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, overall weight: 9,800 kg, controller model: Estun E21, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility. Gkodpfxozlpano Aansb

Condition: used, mileage: 696,000 km, power: 440 kW (598.23 HP), first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2019, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! Gsdpfx Aownz Dtjanokb - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Gkodpfx Aajzb I Sponeb Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side-Mounted Arburg Multilift H Robot Injection Unit: Screw Diameter: 55 mm Shot Weight: 434 g Injection Pressure: 1,650 bar Dosage Volume: 474 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Distance: 520x520 mm Platen Size: 695x695 mm Ejector: electric Clamping System: toggle lever Control System: SELOGICA touchscreen Gksdszy I Nqopfx Aaneb Additional Equipment: - Hybrid machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Control with air valve - 1x hydraulic core pull - 12x hot runner control circuits - Injection unit: hardened – bimetallic - Main motor: servomotor driven by frequency inverter – energy saving - Injection unit powered by servomotor controlled by inverter - Machine equipped with nitrogen accumulator/cylinder for rapid operation (additional charge) - Central lubrication - Automatic mold height adjustment - Kistler sensor for mold pressure control - The injection molding machine was operated in a so-called "cleaning room" and includes additional protective measures against contamination and two vapor absorbers - Side-mounted Arburg Multilift H robot Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Robot and conveyor belt available at additional cost Dimensions: Weight: 6,680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request