Used Forkardt F+160 for sale (37,928)

Condition: used, Year of construction: 2021, operating hours: 4,995 h, functionality: unexamined, overall weight: 2,210 kg, fuel type: diesel, tank capacity: 450 l, power: 121 kW (164.51 HP), output frequency: 50 Hz, nominal power (apparent): 160 kVA, Himoinsa HFW-160 T5 Year of manufacture: 2021 Operating hours: 4,995 Dodpfxsw A Iixs Akisuw Power: 121 kW Fuel: Diesel Rated speed: 1,500 Tank capacity: 450 l (own oil line possible) Turbo needs to be repaired! Only used in seasonal operation.

Condition: good (used), Year of construction: 2010, The Poly-Clip FCA 160 double clipper is a professional machine for closing artificial and natural casings in the meat and food industry. Manufactured by the renowned manufacturer Poly-Clip System GmbH & Co. KG, it is characterized by reliability, solid construction, and high performance. The machine is designed for continuous operation in production facilities, ensuring fast and precise closure of calibers while maintaining the highest standards of hygiene. Dodpfxow Swqio Akieuw Technical specifications: Manufacturer: Poly-Clip System GmbH & Co. KG Model: FCA 160 Power: 4.0 kW Power supply: 3x400V, 50/60Hz Current consumption: 6.0A Operating pressure: 5–7 bar Weight: 625 kg Machine dimensions: 150 × 120 × 190 cm Clip counter: 46841 Manufactured in: Germany Additional equipment: Work table Set of spare parts Advantages of the Poly-Clip FCA 160 clipping machine: Solid and reliable design. Precise and fast closing of casings. Easy to use and highly ergonomic. Suitable for intensive use in industrial conditions. The set includes additional equipment for immediate implementation in production. The Poly-Clip FCA 160 clipping machine is a proven solution for meat and food processing plants where quality, efficiency, and durability are important.

Condition: used, Internal combustion forklift, gas-powered forklift STILL model RX 70-16T Serial No. 517314G00021, Year of manufacture 2016 Rated load capacity 1600 kg Duedpfx Aksinldwoisw Lifting height 4920 mm Fork length 1000 mm Fork carriage width 980 mm Overall height 2160 mm Overall width 1100 mm Overall length without forks 2200 mm Self-weight 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - Internal combustion electric drive - 4-cylinder Volkswagen internal combustion engine with 30 kW - Hydraulic power steering - Work light at the front - Rear warning light (blue) - Warning flashing light at the rear (yellow) - 4-wheel superelastic, solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, maintenance charger VICTRON - New TÜV inspection and UVV certification (surcharge 150 EUR net) in good condition

Condition: good (used), The scope of delivery includes: Dodpfok Uyrijx Akiouw 1x shelf connector, used Material color: light blue Overall length: approx. 1,600 mm Profile dimensions: U 50 x 28 mm Number of holes: 2 pcs. Hole diameter: approx. 11 mm Weight per piece: approx. 1.800 kg General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, For sale: high-quality industrial Siemens SIMOTICS motor. Condition: new, unused, original packaging (warehouse stock, may show slight marks from storage). 🔧 Technical data: Manufacturer: Siemens Model: 1FE1093-6WU11-1BN2-Z Serial number: YFJ86378498 001 Type: 3-phase motor (servo / torque motor) Voltage: 425 V Current: 43.0 A / 60.0 A Power: 16.8 kW / 21.5 kW Rated speed: 1600 rpm Max speed: 7000 rpm Dsdpfsyx I Sljx Akijuw Max torque: 165 Nm Rated torque: 86 Nm Protection class: IP00 Insulation class: 155 (F) Duty type: S1 Cooling: water-cooled (8 l/min, max 25°C) Standard: EN 60034 Temperature sensor: KTY84-130 📏 Construction: direct drive (torque motor) high-precision manufacturing intended for industrial applications without gearbox 💡 Applications: CNC machines drive axes industrial automation production lines 📦 Included: Siemens motor original packaging

Condition: excellent (used), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Mounting: SK40 DV40A SE40 050 tool holder • Diameter: Ø160 mm • Number of insert pockets: large – full set • Insert type: 058 (reusable, replaceable) • Condition: very good, teeth and body without damage, ready for use • Precisely balanced steel body • Manufacturer: WIDAX – Made in Germany • Ideal for CNC milling machines and machining centers with SK40 spindle Duodpexmu A Dofx Akiow

Condition: excellent (used), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional unit designed for use in industrial installations, water circuits, and technological systems. ⚙️ Technical specifications: - Pump manufacturer: Sterling Fluid Systems - Model: ZTIC 040160 - Type: AA ODC B2 KX - Motor: Siemens IE1 - Power: 3.0 kW - Voltage: 230/400V (3~) - Frequency: 50 Hz - Speed: approx. 2835 rpm - Protection class: IP55 - Insulation class: F - Connection: flanged 🛠️ Features: - Centrifugal pump for water and industrial liquids - Heavy-duty industrial construction - Reliable Siemens motor - Flanged version – easy installation in piping systems - Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: - Industrial systems - Heating and cooling systems - Water circulation - Manufacturing plants - Agriculture 📦 Set includes: - Pump with Siemens motor - As shown in the photos Duedpfx Akeyz Dxmeiew 🚚 Shipping: - Shipping by courier or pallet possible - Personal collection also available - Assistance with transport arrangements is offered

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg Duodpfxeh Ek Dao Akiew - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Dsdpfx Ajmhhf Sjkiouw - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany Dujdpfx Akemhh Dtsijw - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, In - Line Vertical Borer for Solid Rail Components etc Heavy duty steel welded frame 4 no Vertical Heads with Single Drills 2 no Vertical Heads with Triple Drills Motor power 3hp each. Pneumatic control for drilling stroke All heads adjustable along X axis via rack and pinion movement. Scale for positioning. Max. drilling between outside heads 1600mm. All heads with cross slide support & adjustment in / out Adjustable depth stroke to heads Dodjzd Ur Hjpfx Akiouw 5 no Pneumatic clamps - adjustable in lateral positioning. Two hand push button safety control.

Condition: good (used), Included in the scope of delivery: 1x deep-profile frame, used Material color: Sendzimir galvanized Overall length: approx. 1,250 mm for shelf depth: 1,200 mm clear span: approx. 1,100 mm crossbar support: approx. 50 mm support angle: L: approx. 80 x 80 mm overall width: approx. 860 mm internal width: approx. 855 mm material thickness: approx. 3 mm Side frame: Length: approx. 1,245 - 1,070 mm tapering towards the front Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height: approx. 195 mm Dusdpfx Aksr Dr Susiew Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This is a used item; scratches, dents, and signs of wear may be present. This item is offered for collection only. Any further transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Multifunction ( printer/scan/fax ) Konica Minolta 1600F New in box with toner . 47 units available now ! Monochrome laser , 16 PPM Color scanner 600x600 ppp As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Dujdogakyfspfx Akijw Please do not hesitate to contact us for further information.

Condition: excellent (used), mileage: 460,073 km, power: 117 kW (159.08 HP), first registration: 06/2009, fuel type: diesel, tire size: 225/75 R17.5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 7,810 mm, total width: 2,470 mm, permissible axle load (axle 1): 3,600 kg, permissible axle load (axle 2): 5,000 kg, loading space length: 5,850 mm, loading space width: 2,370 mm, loading space height: 2,300 mm, Year of construction: 2009, Equipment: ABS, air conditioning, cruise control, electric window regulation, fog lights, = Additional Options and Accessories = - (Roof) spoiler - Rear doors - Radio/CD player - Side mirrors with electric adjustment - Side doors - Sun visor - Digital speedometer = Additional Information = General Information Cab: simple License plate: BX-BH-46 Technical Information Number of cylinders: 4 Engine displacement: 4,462 cc Axle Configuration Tire size: 225/75 R17.5 Brakes: Disc brakes Front axle: Max. axle load: 3600 kg; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle: Max. axle load: 5000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Weights Unladen weight: 5,740 kg Payload: 2,560 kg GVWR: 8,300 kg Dodpfx Akjzkh U Ijisuw Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, Year of construction: 2019, Overview Duedpfxey D Ertj Akiew This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data - Keg washer manufacturer: M+F Keg Technik - Keg washer model: Monomat + RMT - Year of manufacture: 2019 - Capacity: approx. 12 kegs/hour - Keg filler: Included (manufacturer unknown) - System type: Semi-automatic keg washing and filling setup Equipment - Keg Technik Monomat + RMT keg washer - Keg filling system (standalone unit) - 195 x 30 L stainless steel kegs (Type S/A) - 39 x 50 L stainless steel kegs (Type S) - 22 x 20 L stainless steel kegs (Type A) - 22 x 10 L stainless steel kegs (Type S) - 10 x beer taps (various manufacturers)

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  - Formats: KeyKeg - Application: KEG filling - Operating pressure: 5.5 bar - Electrical supply: 230/400 VAC Duodpfx Ajyq Ia Eokiow - Control voltage: 24 VDC - Frequency: 50 Hz  

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  - Capacity: 20- 35 keg/h - KEG type: 20l/30l DIN and EURO - Fitting type: Typ S - Station 1: Interior cleaning - Station 2: Rinsing, sterilization and filling - Semi automatic system - with intergrated CIP, CIP tank at the back of the installation - Dimensions  - Length: 1,100 mm - Width: 1,300 mm  - Height: 2,200 mm +/- 50 mm  - Electrical connection Dedpjxrfcxsfx Akisuw - Voltage: 230/ 400 V, 50 Hz, 3 phases - Connected load: 0,5 kW (without tank pumps) 

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks Dujdpfx Aksriidneiew -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/65/H50 mm -Total weight: 1,6 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Dedpfx Aetxknzokieuw -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 105/67/H72 mm -Total weight: 2.9 kg

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates Dsdpfx Aot Drkyokisuw -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: good (used), Electric motor, three-phase motor Djdpfx Akscvnagoiouw -Power: 15 kW -Speed: 2910 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 580/350/H395 mm -Weight: 95 kg

Year of construction: 1994, condition: used, Pressure blower, radial fan, high pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: VEB ILKA, radial fan extraction fan -Type: IRHMF160 / 2 see photo type plate Dodpfx Akjuncxisisuw -Engine power: 3.4 kW / 2900 rpm -Volume flow: 0.242 - 0.694 m³/s -Inlet: Ø 160 mm -Connection output: 250 x 160 mm -Fan wheel: Ø 500 mm -Dimensions: 780/490/H1030mm -Weight: 88kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Handover: in current condition as seen -Toothing: 1 piece Damage see photos -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 115/65/H65 mm Dsdpfxerrzfke Akijuw -Total weight: 2.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing Dusdsww Axdspfx Akiew -Shipping/Price: complete -Dimensions total: 285/240/H85 mm -Total weight: 24.4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws Djdoww Ec Espfx Akijuw -Interchangeable jaws: 3-piece hard top jaw set -Width: 32 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 90/95/H55 mm -Total weight: 2.1 kg/set