Used Fraction Collector for sale (481)

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pgedpju A Thlofx Adlok inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs Psdsyug Hxepfx Adlegk • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Pgedpfxegk Nlpj Adlsk Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman Dust Extraction System / Silo Dust Collector with Control Unit and Compressed Air Preparation Condition: Very good, commissioned in 2023 and operated for only 2 years until 2025; dismantled due to plant closure Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems Design: Compact steel construction with integrated filter module Filter cleaning: Pulse-jet compressed air cleaning Installation type: Roof-mounted on silo Typical use: Industrial dust extraction, bulk material handling, environmental technology Fan Manufacturer: Nederman Model: FMZ 620 Year of manufacture: 2023 Power: 3 kW Explosion-proof design Control Unit Manufacturer: Nederman Model: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pedpfoyxvpfsx Adlogk Pressure Vessel Manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Model: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum allowable pressure: 7 bar Permitted temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control Cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed Air Treatment: Camozzi MC202-D00 Max. input pressure: 16 bar Output pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB control/terminal box Version: Dust extraction system for silo applications with integrated filter unit and fan Accessories / Scope of delivery: - Electrical control cabinet with control system - Compressed air preparation unit with pressure gauge - Pressure vessel for pulse cleaning - Fan with motor - Pipe connection with weather protection grill - Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 24,314 h, machine/vehicle number: A0230A1231, laser power: 6,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine by 30.04.2026! Due to increased selling pressure, the auction period has been shortened and the reserve price reduced! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 100 mm Laser power: 6,000 W Laser unit: CO2 laser TLF 5000, high-frequency excited Max. workpiece weight: 900 kg Positioning speed (X/Y): 200 m/min Positioning speed simultaneous (X+Y): 300 m/min Max. sheet thickness steel: 25 mm Max. sheet thickness stainless steel: 25 mm Sheet thickness aluminum: 15 mm MACHINE DETAILS Power-on hours: 55,176 h Cutting hours: 24,314 h Control model: Siemens Sinumerik 840D Control features: - Open PC-based control system - Online support - Diagnostic functions - Maintenance logbook - Technology data - Remote maintenance Safety equipment: - Multi-beam light barriers and guard enclosure - Fully enclosed beam path with nitrogen ventilation - Monitoring system - Multi-chamber extraction and compact dust collector Paint finish: white RAL 9002 / gentian blue RAL 5010 Drives: Gantry drive combined with linear direct drives ADDITIONAL EQUIPMENT - Cooling unit - Logbook function - Automatic pallet changer - Laser power control - HI-LAS high-pressure cutting - PMS plasma sensing - Programmable power cycles - Programmable cutting gas pressure regulation - Laser cutting head with 5" lens and 7.5" lens - Quick-change system for cutting heads - Automatic sheet edge detection - APC capacitive height control and process monitoring - PCS (Process Control System) - Laser diode positioning - Automatic focus adjustment (AutoLas Plus) Pgjdpfx Adoyynu Njlok - Spraying device for safe thick sheet processing - Automatic shutdown - Work area lighting - Fully enclosed machine frame with integrated laser unit

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,130 h, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, Submitting a bid entails an obligation for timely collection by 30.04.2026! Increased pressure to dispose - therefore reduced listing duration and lower minimum price! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Accuracy Minimum incremental movement: 0.001 mm Positional deviation: ± 0.1 mm Positional repeatability: ± 0.03 mm Laser Model: TruFlow 6000 Pgodpfeyynuijx Adljk Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Pulse frequency: 0.01 - 10 kHz Gases: CO₂ / N₂ / He Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Operating hours Beam-on time: 21,660 h Laser-on time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar EQUIPMENT Cooling unit, logbook function Automatic pallet changer Gantry drive combined with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor technology Programmable power cycles Programmable cutting gas pressure regulation Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height and process control PCS (Process Control System) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray device for safe thick sheet processing Automatic shut-off Work area lighting Open PC-based control system Online assistance Diagnostic functions Maintenance logbook Technology data Remote maintenance Safety Multi-beam light barriers Fully enclosed beam guidance with nitrogen flushing Monitoring system Multi-chamber extraction and compact dust collector Protective enclosure Machine system software

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Pgedpferz R Arex Adlek Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,120 mm, total height: 1,490 mm, total width: 660 mm, type of input current: AC, product height (max.): 120 mm, product height (min.): 1 mm, product length (min.): 50 mm, product length (max.): 430 mm, product width (max.): 290 mm, product width (min.): 50 mm, input voltage: 230 V, input current: 13 A, overall weight: 100 kg, power: 3 kW (4.08 HP), film width: 400 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), table width: 320 mm, table length: 460 mm, Equipment: documentation/manual, 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine – UNUSED – As New Used 2017 Robert Seal Corp SC346 heat shrink wrapping machine for sale. Never used from new, single phase, compact shrink wrapper, excellent condition. Machine Manufacturer: Robert Seal Corp. Model: SC346 Machine Type: Heat Shrink Wrapping Machine Year: 2017 Condition: Never used from new. High-Quality Heat Shrink Packaging Machine for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine, supplied new and never used from new. The machine is in very good / as-new condition, making it an excellent opportunity to acquire a modern shrink wrapping system at a fraction of new cost. Designed for efficient, professional heat-shrink packaging, this compact and reliable machine is ideal for manufacturing, food, print, distribution, e-commerce, and general packaging applications. Key Features & Benefits Robert Seal Corp SC346 Heat Shrink Wrapper Manufactured 2017 Never used – unused stock Compact footprint Simple, reliable operation Single-phase power – easy installation Ideal for small to medium production runs CE marked Technical Specifications – Robert Seal Corp SC346 General Machine type: Heat Shrink Wrapping Machine Model: SC346 Year of manufacture: 2017 Condition: Very good – never used Supplier: Robert Seal Corp CE compliant Power & Electrical Power supply: 230V – 1 Phase Frequency: 50 Hz Installed power: 3.0 kW Current: 13.6 A Dimensions & Weight Overall machine dimensions: Length: 1120 mm Width: 660 mm Height: 550 mm Machine weight (without stand): 69 kg Working table height (on stand): 940 mm Sealing & Packaging Capacity Sealing area: 320 × 460 mm Minimum package size (A × B × C): 50 × 50 × 1 mm Maximum package size (A × B × C): 430 × 290 × 120 mm Note: B + C must not exceed 350 mm Film type: Centre-fold shrink film Maximum film thickness: 60 gauge Typical film dimensions (D-F-E): 400 × 250 × 75 mm Pgsdsydqm Iopfx Adlsk Operating Characteristics Acoustic noise level: 71.8 dB Compact, energy-efficient heat tunnel Suitable for continuous or intermittent operation Ideal Applications Product shrink wrapping Food & beverage packaging Printed materials & cartons E-commerce fulfilment Contract packing operations General manufacturing & distribution Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used & unused machinery Machines honestly described and inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,193 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, controller model: F0i, number of axes: 2, Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8” (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine. • Control: Fanuc F0i • Operating hours: 6,193 h • Spindle: 8" chuck (210 mm); bar capacity Ø52 mm • Capacity: Max turning diameter Ø350 mm; max turning length 330 mm Psdpfxeyxhqze Adljgk • Axes: rapid traverse X/Z 30 m/min • Turret: 12 stations; tool change time 0.15 s; tool shank 25 x 25 mm; boring bar Ø32 mm • Tailstock: Programmable with rotating tip • Certification: CE • Software/monitoring: Doosan tool load monitoring system Additional equipment • Basic tool holder set • Oil mist extractor • Transformer • Bar feeder preparation • Workpiece catch with collection box • Automatic tool gauge • High-pressure cooling 7 bar (1.1 kW) • Oil separator • Chip collector • Electrical noise suppression Technical Specification Counter Spindle No Driven Tools No

Condition: used, Westtech Woodcracker CL260 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 320 Cutting diameter hardwood (mm): 260 Grapple opening = shear opening (mm): 760 Own weight (basic – fully equipped) (kg): 350 – 630 Recommended main circuit oil flow (l/min): 50 – 100 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit oil flow (l/min): 40–60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 6 – 14 Optional: Autospeed Optional: Collector grapple Optional: Cylinder swivel mechanism: 2 x 48° Adapter plates (MS01 / MS03 / MS08 / etc...) on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with more than 800 used vehicles one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you. Pgedsyfpzyjpfx Adlek Rental possible = Additional information = New: Yes Contact Tobias Ebert for further details.

Condition: used, Westtech Woodcracker CL320 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening / shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended flow rate main circuit (l/min): 70 – 150 Recommended operating pressure main circuit (bar): 280 Recommended flow rate auxiliary circuit (l/min): 45–60 Recommended operating pressure auxiliary circuit (bar): 200 Carrier vehicle operating weight (t): 12 – 20 Optional: Autospeed Optional: Collector grapple Optional: Cylinder Swing Device: 2 x 48° Podeyfvp Rjpfx Adlsgk Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products. Rental available = More information = New: Yes Please contact Tobias Ebert for further information.

Condition: used, Westtech Woodcracker C250 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 300 Cutting diameter hardwood (mm): 280 Grapple opening (mm): 930 Shear opening (mm): 450 Net weight (basic – fully equipped) (kg): 580-970 Recommended hydraulic flow (l/min): 50-100 Recommended hydraulic flow for auxiliary functions (l/min): 35-50 Recommended operating pressure (bar): 280 Carrier vehicle service weight* (t): 7-15 Multigrip: integrated Optional: Autospeed Optional: Twin-cylinder slew drive: 2 x 48° Optional: Continuously rotatable tiltator Optional: Collector Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are an official Westtech Woodcracker distributor and service partner, Magni telehandler distributor and service partner, JCB construction equipment distributor and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. Pgjdeyfq U Ujpfx Adljk We supply the complete Westtech Woodcracker product range! Rental available = Further information = New: Yes Please contact Tobias Ebert for more information.

Condition: used, functionality: limited functionality, Year of construction: 2017, operating hours: 1,180 h, Drive concept: H-DRIVE (diesel-hydraulic) Transport dimensions: 16,525 x 3,200 x 3,400 mm (L x W x H) Discharge conveyor overflow lower deck (medium fraction): 650 x 10,200 mm (W x L), discharge height 5,000 mm Discharge conveyor overflow middle deck (medium fraction): 650 x 10,200 mm (W x L), discharge height 5,000 mm Discharge conveyor overflow upper deck (oversize): 500 x 8,900 mm (W x L), discharge height 5,020 mm Fine discharge conveyor: 1,200 x 6,600 mm (W x L), discharge height min/max: 3,300/4,500 mm Belt conveyor fine fraction extraction: 650 x 1,800 mm (W x L) Screen unit type: triple-deck classification screen Upper deck dimensions: 1,550 x 4,500 mm (W x L) Psdpfx Ajyvfczjdlsgk Max. feed size: 160 x 100 x 60 mm Feed height: 2,520 mm Feed height – foldable bar grate: 3,580 mm Feed capacity up to approx.: 350 t/h Hopper volume: 8 m³ Feed conveyor: 1,200 x 10,300 mm (W x L)

Year of construction: 2025, operating hours: 1,050 h, condition: reconditioned (used), functionality: fully functional, Alzinger Lepton 5100 – Solution for the Bio-waste Ordinance (BioAbfV) Ideal for organic waste separation: Easily meet the statutory 1% threshold! From May 2025, organic waste may only be treated if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation instead of Shredding - Gentle Bag Opening: Waste bags are reliably opened without shredding the contents. A pre-shredder (slow-speed) is not required! - Maximum Film Size: Plastic films remain largely intact and are efficiently removed during the first screening process, before they can fragment in the compost windrow due to turning, heat, and UV exposure. - Highest Purity: Prevents microplastics in the process and ensures high end-product quality. Economic Efficiency: - Legal Compliance: Reliably stay below the 1% threshold required by the BioAbfV. - Process Optimization: Reduced effort in post-cleaning. - Cost Efficiency: Significant savings on diesel and wear costs since no pre-shredder is necessary. - Integrated Air Separator: No need for bulky auxiliary machines. Saves space and maintenance costs. Innovative Process (Flexibly Controllable): - Organic Waste Processing (2-fraction mode): Reversible mid-size discharge belt brings together medium and fine fractions for a homogeneous mix. Result: Clean target fraction for digestion/composting plus coarse fraction with films/contaminants. - Compost Refinement (3-fraction mode): Separation into premium compost, structural material, and energy wood. The ballistic separation effect removes stones, glass, and hard plastics via the stone fraction belt. Integrated air separators remove any remaining film residues. Current Application: Successful organic waste processing for wet digestion. The machine delivers a contaminant-free, homogeneous fraction for the fermenter, preventing the formation of sink or floating layers. Inspection & Demonstration: Live demonstration available at our partner facility in the Kelheim district. Processing steps can be discussed directly with the plant operator. Technical Data: - Model: Lepton 5100 | Year of manufacture: 2025 | Approx. 1,050 operating hours - Location: D-84069 Schierling | Availability: Short notice - Screen Decks: Deck 1 (52mm), Deck 2 (43mm) Pgjdpey Elwfofx Adlok - Equipment: Variable dosing roller, volume measurement, air separator preparation, compressor, LED lighting package, radio remote control. - Drive: Diesel-electric (Perkins 58kW, no AdBlue) + external power supply option (400V 63A). - Transport Dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). - Screening Materials: Compost, green waste, biomass, wood, municipal waste, RDF. - Condition: Very good, fully operational. The machine will be completely overhauled by us before sale.

Year of construction: 2003, operating hours: 10,600 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 6094, Equipment: centralized greasing system, Spare parts donor! TECHNICAL DETAILS Coarse screen deck: 120/150 Pgsdpfx Adjyzznlslok Fine screen deck: 10/25 MACHINE DETAILS Generator voltage: 400 V / 50 Hz Weight: 20,000 kg Engine operating hours: approx. 10,600 h EQUIPMENT Trailer Hopper Magnetic drum for mid-size fraction conveyor Magnetic drum for oversize fraction conveyor Clip-on chute Hydraulic rear support Direct connection Central lubrication system Generator 50 mm drawbar eye Note: The engine starts but shuts off again after a while. Presumably there is a fuel issue. The generator produces power. The machine is currently not roadworthy as it has been stationary for a long time. Road registration is currently not possible.

Condition: excellent (used), mileage: 1,175,000 km, power: 338 kW (459.55 HP), first registration: 01/2003, fuel type: diesel, tire size: 385/65R,22,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 1,400 l, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro3, suspension: steel-air, total length: 6,710 mm, total width: 2,500 mm, Year of construction: 2003, Equipment: ABS, cruise control, differential lock, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Features = - 2 beds - 12-speed manual gearbox - Aluminum fuel tank - Heated mirrors - Power brake booster - Comfort driver's seat - Differential lock - Differential lock - High beam - Speed limiter - Hydraulic system - Tipping hydraulics - Air horn on cab roof - Radio/CD player - Beacon lights - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - V.E.B. engine brake - Power take-off (PTO) - Power take-off (PTO) = Remarks = ORIGINAL DUTCH VOLVO NH12-460 (TORPEDO / BONNET / LONG NOSE) GLOBETROTTER ROYAL CLASS 4x2 TRACTOR UNIT WITH MANUAL GEARBOX, VEB ENGINE BRAKE & HYDRAULIC KIT!! 460 HP, EURO 3!! 12+2 SPEEDS MANUAL GEARBOX!! “ROYAL CLASS” EDITION!! VEB ENGINE BRAKE!! 700+700 LITER DIESEL TANK!! FULL CABIN SPOILER KIT!! P.T.O.!! TIPPER HYDRAULICS!! 2x DIESEL TANK!! LEATHER SEATS!! AIR CONDITIONING!! ETC!! ORIGINAL DUTCH (COLLECTOR’S ITEM) TRACTOR UNIT IN GOOD DRIVING CONDITION, READY FOR HEAVY TIPPER JOBS!! MORE VOLVO (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING OR TRANSPORT?? NO PROBLEM FOR US, WE ARE AN “ONE STOP SHOP” COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) Podpfeyu Uphjx Adlegk YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS: “YOUR GLOBAL TRADING PARTNER” = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,130 cc Transmission Gearbox: SR1900 (12+2 GEARS MANUAL), 12 speeds, manual gearbox Axle configuration Brakes: drum brakes Front axle: Tire size: 385/65R 22.5; Max. axle load: 7,100 kg; Tire tread left: 20%; Tire tread right: 20%; Suspension: leaf spring Rear axle: Tire size: 315/80R22.5; twin tires; differential lock; Max. axle load: 11,500 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,010 kg Payload: 10,590 kg gross vehicle weight: 18,600 kg Functionality Cargo volume: 1,400 l Load platform height: 120 cm Condition Technical condition: very good Visual condition: good Identification Registration number: BN-JD-90 Further information Please contact the Sales Department or Erik Engel for more information.

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Pedpfx Aemrm Raedlogk Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Condition: used, Year of construction: 2008, x-travel 1016 mm Pgjdjwvl Aijpfx Adlsk y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, 1HRT 210 A with tailstock - Oil dust collector

Condition: good (used), Year of construction: 2000, Stable free-standing screen for wood chips and sawdust. 3 fractions. Perforations of 45 and 6 mm. Screening area approx. 7.3 sqm. Capacity: 80 - 120 m³/h. Robust eccentric system at top and bottom. Drive: 5.5 kW. Dismantled and loaded onto truck free of charge. Pgedpfx Adex Sxg Hslsk

Condition: good (used), Year of construction: 2000, Stable free-standing screen for wood chips and sawdust. 3 fractions. Perforations of 45 and 6 mm. Screening area approx. 7.3 sqm. Capacity: 80 - 120 m³/h. Robust eccentric system at top and bottom. Drive: 5.5 kW. Dismantled and loaded onto truck free of charge. Psdsx Sxgyepfx Adlsgk

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. Pgedpfx Ajvmy Icedlek _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector - cooling system - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: used, Year of construction: 2009, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück Pgjdewvl Acopfx Adlok weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - 4th axis HRT 210 A with tailstock - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - oil dust collector - prepared for cableless 3D touch probe Renishaw

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood Pgjdpfjy Aa Ugex Adlok - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: used, This listing is for the Jenway 3520 bench‑mounted laboratory pH/mV/temperature meter The unit is in full working condition and is ready for immediate use The Jenway 3520 is a bench‑mounted laboratory pH/mV/temperature meter designed for precise measurement and recording of hydrogen ion concentration (pH), redox potential (mV), and solution temperature in scientific, QC (quality control) and GLP environments. Key Features Measurement Capabilities - Measures pH, mV (redox potential) and temperature simultaneously. - High resolution: up to three decimal places (0.001 pH) for detailed accuracy. - Wide pH range: typically –2.000 to +20.000 pH units. - Temperature range from approximately –10 °C to +105 °C. Calibration & Buffer Recognition - Supports 1, 2, or 3‑point pH calibration for flexible accuracy. - Automatic or manual buffer selection, compatible with DIN, JIS and NIST standards. Data & Logging - Built‑in data logger can store up to 500 readings, with options for printing or exporting via interfaces. - GLP support includes calibration reminders, security‑protected user data, and multiple alarm options. Pedsyk Evqopfx Adljgk Display & Interface - Backlit LCD display shows readings clearly. - Communication via analogue output, RS‑232 serial port and optional IrDA (infra‑red) printer interface. Additional Functions - Multi‑language menu options. - Alarm outputs (audible and open‑collector) for set thresholds. - Option to wall‑mount or bench‑top install. ----- Typical What’s Included Depending on the specific kit or version you buy, the meter often comes with: - Glass combination pH electrode - Automatic Temperature Compensation (ATC) probe - Buffer sachets (pH 4, 7, 10) - Electrode stand and holder - Power supply (230 VAC / UK or 120 VAC versions available) ----- Typical Applications The 3520 is suited to: - Routine pH analysis in research and industrial labs - Quality control and regulatory compliance testing - Monitoring & logging in process environments - Scenarios where traceable, high‑precision data is needed ----- If you want detailed user‑manual specifications (e.g., calibration procedure, wiring diagrams), I can help find or summarize that too!

Condition: used, mileage: 133,401 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 7,490 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,250 mm, total width: 1,700 mm, total height: 2,190 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, soot filter, Kiefer Boki 1152T 6x4 chassis 3.0l diesel engine 110KW/150PS Euro 6 with all-wheel drive and air conditioning in municipal orange RAL 2011 - Ready for immediate use!----EZ 08/2019 Mileage: 133,401 km Psdpfx Aovywikedlogk Vehicle operating hours: 5,114 BH Previous owner: 1st hand municipal vehicle ----* Iveco engine 3.0 FPT F1C 110KW/150PS EURO 6cTorque 370 Nm Emissions level EU6c Diesel particle filter (DPF) SCR catalyst / AdBlue * 10-speed fully synchronous reduction manual transmission * Permissible total weight 7,490 KG (payload 4,000KG) * Top speed 90 km/h * Chassis 6x2, all-wheel drive 6x4 switchable * Front steering * 3rd axle hydraulically steered (hydraulically liftable) * Wheelbase 2nd axle 2400 mm / 3rd axle 3390 mm * Winter tires 285/65 R16 * Hydraulics / lifting gear from 55 to 105 L/min up to 300 bar * 2 circuit hydraulics * Radio * Air conditioning * Seat heating * Trailer coupling ball coupling - trailer load 3,500KG can be retrofitted * All-wheel drive switchable with mechanical differential lock and reduction * Yellow rotating beacon * Driver's suspension seat with armrest and passenger seat adjustable ISRI * Preparation for front mounting plate for front attachments quick-change device * Hydraulic parking brake ----The Boki 1152 T is superior with a permissible total weight of 7.49 tons and a width of just 1.70 m. With an additional liftable third Axle, the Boki 1152 T is as agile as its two-axle colleagues. With a payload of up to four tons, a powerful engine with 150 HP and a maximum speed of up to 90 km/h, there are practically no limits to what you can achieve. The innovative vehicle concept enables optimal use both as a transport vehicle and as a work tool. The powerful hydraulic system and the extensive range of body options ensure multifunctional use. Immediately roadworthy and ready-to-use vehicle from 1st hand, in neat and well-maintained condition! Vehicle was previously used by city cleaning as a garbage collector with a press body, so no use in winter service - no rust! MOT/AU and maintenance inspection new upon delivery! ----Your contact for this vehicle: Daniel Seidler Tel: Mobile: also Whatsapp Email: Errors and changes reserved!