Used Glf-Hp for sale (5,684)

Condition: ready for operation (used), Year of construction: 2005, Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible. Cjdpfowal Imsx Ac Nsgt

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, operating hours: 336 h, edge thickness (max.): 8 mm, total length: 4,764 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Csdjydc Abjpfx Ac Nsgt Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D 48-tool changer, Capto C8 tools chip conveyor Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM Cgedpfx Aowzyn Rjc Njt weight 23,500 kg

Condition: new, pressure 10 t stroke 200 mm table-size 450 x 450 mm working speed: 10 mm/ sec. work height max. 940 mm toolpiece height max. 150 mm total power requirement 1,1 kW 150 x 6 mm weight 0,4 t Cjdpfx Aot Eacaec Nogt dimensions 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools

Condition: new, pressure 20 t stroke 200 mm table-size 550 x 550 mm working speed: 10 mm/ sec. work height max. 940 mm toolpiece height max. 200 mm total power requirement 2,2 kW Codevn U Dujpfx Ac Njgt 200 x 10 mm weight 650 kg dimensions 1,1 x 0,6 x 1,22 mm

Condition: like new (used), Vacuum filler Type: Vemag Robot HP 25 E Hopper capacity: 350 liters, single-piece Filling mechanism: bushing double screw Steplessly adjustable filling speed: 0–100% Production capacity: up to 25,000 kg/h, depending on product and fill type Control: PC graphic Portion weight: 5 to 60,000 grams Compatible for use with clipping machine Compatible with Vemag grinder 982 Vacuum pump: 40 m3/h Loading device for standard bins Machine dimensions in mm: Width: 1400.0 Length: 2400.0 Height: 2180.0 Rated power: 31.0 kW Voltage: 380 V, 50 Hz Cedpsy Hhi Hefx Ac Nsgt Machine weight: 1450 kg

Condition: used, Year of construction: 1996, Technical details: cutting range for steel to: 25 mm Ampere: 2 x 120 A ( 2 verfügbar) Plasma cutting system with possible welding processes: - Plasma cutting, flame gouging; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals as well as arc welding Description: Cjdpfju Nwxnex Ac Negt - Power source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) multiple frequencies 50/60Hz ( 2 pcs available price per piece) - Torch: CPM 250 (flat electrode) 1 pc available i.D. *

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with EFFER Crane Truck: • FH 8x2R NLA air suspension • Application cycle: Long-distance transport • Predominantly flat topography • Gross combination weight, technical: 60 t (observe towing capacity of drawbar coupling!) • Rear-view mirrors for body width 2600 mm Main Components • Chassis height: MED (medium) • Trailing axle, electro-hydraulically steered, single tyres • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Globetrotter safety cab FH • Wheelbase: 4,900 mm • Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation • Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm • Volvo Engine Brake+ (VEB+) (meets ADR braking regulations) • I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm • Liftable axle • Rear axle RSS1370C, axle load 13 t, GCW 70 t, differential lock • Drive axle ratio 3.08:1 Chassis • Air suspension on front axle(s) • Lifting on front axle air suspension: Basic (more ground clearance, reduced lift range) • Front axle load max. 20 t (technical) for double front axle • Rear axle load max. 23 t (technical) • First trailing axle 10.0 t • Volvo Dynamic Steering (VDS) including Stability Assist • Disc brakes, solid discs • EBS, Electronic Braking System, Medium package • AGM batteries, 2 x 210 Ah • 275 l fuel tank, left (plastic) • AdBlue tank, usable capacity 57 l (between the front axles) Trailer / Coupling • Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) • Electrical connection for semi-trailer/trailer, 15-pin (ADR possible) • Duomatic coupling Wheels and Tyres • Dura-Bright EVO aluminium rims (polished) • FA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • DA Tyres 315/80R22.5 (Continental Conti Eco HD5, 3PMSF) • NLA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • Tyre pressure monitoring with internal sensors Crane • Effer E-9 Jib.155Q-6 JDC • JIB • Winch Body • All necessary chassis work for crane installation, including vehicle frame modification. • Compliance with body builder guidelines of the relevant chassis manufacturer for all work. • Complete installation of a specially developed auxiliary frame from high-tensile steel. • Welded and bolted auxiliary frame for high torsional rigidity and optimum stability (unique feature). • Supply/installation of front support legs • Assembly/bolting of the crane and main support, including installation of all hydraulic and electrical connections. Cgedox Rk Dnopfx Ac Net • Usable as a tractor unit via removable/sliding Jost fifth wheel (JOST JSK SL), superstructure removable. • Removable flatbed body as high-profile welded steel construction (approx. 4,250 mm x 2,480 mm, A-dimension open). • Flatbed equipment: Container locks, Multisafe/Multifix stanchion pockets and retractable lashing eyes (2,500 daN / 6,500 daN). • Removable aluminium drop sides and rear underrun protection (extendable) incl. additional/front support. Further information on request.

Condition: used, machine/vehicle number: IC1113, Year of construction: 2014, operating hours: 6,912 h, load capacity: 2,000 kg, lifting height: 200 mm, load center: 800 mm, fork length: 1,600 mm, overall weight: 770 kg, enginetype: Electric, manufacturer: Jungheinrich Cjdpfxew Un Hts Ac Njgt

Condition: new, Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input current: 192 A, overall weight: 9,900 kg, type of cooling: water, Induction motor SIEMENS 1SN 1634-4 HP 90-Z 1992, H-module, all documents included Power: approx. 2.5 MW Cgodpevu T Sqefx Ac Nst Voltage: 11 kV Speed: ~1480 rpm

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 16 A, Equipment: type plate available, Migatronic TIG DC HP Excellent TIG welding machine with the best working settings. Designed for complex welding tasks in the field. Cjdpsvbyazjfx Ac Nogt The ideal service and assembly machine.

Condition: used, Used YASKAWA industrial robot HP 20. In good condition. With NX100 controller. Cgodpsxhg S Tsfx Ac Not

Year of construction: 2004, condition: good (used), machine/vehicle number: UP 20_LIND, Used Motoman HP20 Cgodpsfd Drrofx Ac Njt Type: HP 20 Control system: NX100 Year of construction: 2004.09 Load capacity: 20 kg

Condition: good (used), Year of construction: 2004, machine/vehicle number: UP 20_H, load capacity: 20 kg, arm reach: 1,717 mm, Several Motoman HP20 industrial robots are for sale in good condition. Model: HP 20 Cgedpfx Acsx Ed Dbj Not Controller: XRC Year of manufacture: 2004 / 2005 Payload: 20 kg

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Cjdpew Nadysfx Ac Njgt Equipment and technical data: Travel ranges: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Cedpeufy S Hofx Ac Nogt Model Type 8 HP VC 1200-325 Volume 9980l Weight 2200kg

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Cgedpfxsx Sq Uvs Ac Njt Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: new, Year of construction: 2023, First registered: October 5, 2023_____Total weight 22000 kgOwn weight approx. 6000 kg Maximum payload 20000 kgPermissible support load 3000 kg (4000 kg*)Parabolic suspension 24000 kgStandard capacity 12 m³Transport capacity (SAE 221) 16.4 m³Oil requirement 36.7 litersTipping angle 61°Traction requirement 150 HPTowing height 510-550-590 mmFloor width 6 mm HARDOX 450Wall width 6 mm HARDOX 450Side wall height inside 1185 mmFloor length inside 5400 mmTotal length 7280 mmTotal height of the trough without elevation at the front (with standard tires) 3050 mmVehicle width (with standard tires) 2570 mmStandard tires 620/60 R26.5Color Stronga YellowSpeed 40 km/h4000 kg with K-80 ball head couplingStandard equipmentBPW axle, brake 410x180, axle cross-section 150x150mm,WABCO compressed air brake for all wheelsHandbrake24 ton parabolic suspension, 1525 mm distance between axles, spring mounted on axlesSuspension drawbar with rubberball head coupling plate, height adjustable in 3 positionsScrewed-on towing eye, Scharmüller 50mm diameterSupport foot with fast gearTires 620/60 R26.5 Nokian Country KingQuarter fenders front and rearWheel fenders on the sides of the tubRemovable underrun protection at the rear12 V LED lighting systemHydr. opening tailgate with hydr. Valve2 wheel chocks Special equipmentALB brake valves for air brakeAutomatic slack adjuster32t parabolic suspension, 1525 mm distance between axlesSpring-loaded drawbar with leaf springsBall head coupling Scharmüller D-80 mmSteel toolboxSide underrun protectionTwo LED work lights at the rear,Storage location:null Cgedpsnr D Twjfx Ac Not

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Csdsltrmuepfx Ac Negt Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Multilame parakeets with a 30 cm mat and 20 HP motor Cgedpfoytr Skex Ac Nst

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Csdpfstv Hzvjx Ac Njgt Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,660 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 682 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are comprehensively refurbished according to FEM-4.004 and current safety standards – ensuring maximum quality and safety for you. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after the purchase Test on site and get expert advice – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Order Picker ECE 220 HP Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 3,660 Lift height: 122 mm Mast type: None Free lift: No Initial lift: Yes Overall length: 2,550 mm Overall width: 800 mm Overall height: 1,500 mm Fork length: 1,150 mm Unladen weight: 682 kg Cedpfx Acjxwqine Nsgt Load centre: 600 mm Tyres: Polyurethane Model type: ECE 220 HP Battery type: PzS Voltage: 24 V Battery weight: 380 kg Charger: On request Cabin features: Elevating operator platform

Condition: used, Year of construction: 1981, machine/vehicle number: 11798-214, Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Cgjdpfx Acsu Uc Tle Not Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13,9 kW, Used machine Cgsdpfov Dr Hfex Ac Not Manufacturer: Andritz Type: HP 50-180.1/2/S.15/2 Electrical data: 400V; 27A; 15kW Flow rate: 42 m³/h Head: 80 m Year of manufacture: 2015 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13.7 kW, Used machine Manufacturer: Andritz Type: HP 50-180.1/2/S Electrical data: 400V; 27A; 13,7kW Flow rate: 42 m³/h Head: 80 m Year of manufacture: 2013 Overall dimensions: Length: 380 mm Width: 350 mm Cjdpjwmb Ebofx Ac Njgt Height: 1080 mm