Used Grant T100 12L for sale (445)

Condition: good (used), Waste oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg Hedpfx Ajb A Hfzomijnr

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 16/65 rpm -Power: 0.35/1.3 kW Hsdschq Icepfx Amisnr -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 44 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 660/260/H210 mm -Weight: 47 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg Hodpeb Ilw Tjfx Amienr

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Scissor lift table: movable, with roller conveyor 500 x 2400 mm -Load capacity: 1000 kg -Platform: 2400 x 820 mm -Stroke travel: 900 mm -Dimension when retracted: Height 240 mm -Dimension when extended: Height 1140 mm -Rollers: Diameter 40 x 500 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1554 mm Hnjdouppikjpfx Amisr -B. Pressure: 160 bar -Weight: 372 kg

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm Hedpfx Amex Eipvjienr -Weight: 10 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: KH47 DT100L4BMG/HR/TF -Speed: 133 rpm -Power: 3 kW -Hollow shaft: Ø 35 x 180 mm -Protection rating: IP54 -Brake: 16 Nm -Number: 2x geared motors available Hnsdpfxjik Ac Ae Amior -Price: per unit -Dimensions: 650/265/H195 mm -Weight: 51 kg/unit

Condition: good (used), Temperature controller, temperature sensor, temperature setting -Type: Pt 100 Din Hnsdpfob A S Dtsx Amior -1 package, contents 10 pieces -Weight: 0.8 kg

Condition: used, Year of construction: 1976, Forklift attachment, crane arm, load arm -Manufacturer: Meyer, crane arm load arm for forklift trucks Hodpfsttimqjx Amisnr -Load capacity: 1000 kg -Mounting: Forklift, dimensions see photos -Dimensions: 1800/840/H980mm -Own weight: 83 kg

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm Hnedpedkzv Dsfx Amisr -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Condition: used, Electric motor, three-phase motor -Lenze: GFT 100-2 (0.6 kW 800 rpm) -Power: 0.6 kW -Speed: 800 rpm -Lenze fan: S2E 170 (0.05 kW 2500 rpm) -Shaft: Ø x L 28 x 60mm -Construction: B3 -Dimensions: 710/260/H200 mm Hnsdped Ty A Hsfx Amior -Protection class: IP54 -Weight: 31.5 kg

Condition: used, Sensor-actuator distributor, distributor strip Hnjdpedntfgofx Amier -Connection: 15 - 30 V DC -Distributor: 8-way -M12: x 1 screw connections -Weight: 90 g

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 113201690006, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, This device is a component of an entire production line, which has not been in use since 2022. The entire line consists of 6 such devices, which are grouped in pairs. Each pair of devices has its own control cabinet/switchboard. The entire system is controlled from a main switchboard. The entire system, or individual components, will be sold. Hnsdpfx Aezt Npremijr

Condition: good (used), Code: 0472 Brand: CML - SAGITTARIO Model: T 1000 - CE Standard Lathe for wood and similar materials – CE Standard Technical data: Max centre distance 1000 mm Centre height 150 mm Max machining diameter 300 mm Gouge rest Tailstock N° 3 spindle speeds Three-phase motor 1,5 Hp Work area guard Hnodpozquzbofx Amisr Tool shelf Overall dimensions mm 1700 x 650 x 1100 h Weight kg 280

Condition: excellent (used), functionality: fully functional, Weinig Powermat 1000 four-sided planer Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW (power lock) Left: 5.5 kW Right: 5.5 kW (power lock) Top: 11 kW (power lock) Bottom: 15 kW Hnjdpfx Amszt I Sfjier Top: 7.5 kW (power lock) Bottom: 7.5 kW All spindles: 8000 rpm Feed speed adjustable via frequency inverter up to 30 m/min Electromotive positioning of working height and width Weinig power com system Pneumatic material clamping 2 smooth rollers in the working table Working table length: 1970 mm Drive on cardan shafts

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 08/2028, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle number: G300103 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) Hnodpfx Amozpcwzeior * Viktoria Sologubova (Polish, Russian, Ukrainian, English) VIDEO: Sewer cleaning vehicle with 2,875 operating hours Rockstroh Dran Jet 100 Year of construction: 2010 Pump performance 91 l/min - 150 bar 115 l/min - 120 bar 128 l/min - 160 bar* 120 l/min - 180 bar* 106 l/min - bar* 92 l/min - 210 bar* *only for van body High-pressure system Half-side positioned high-pressure unit Safety, overflow, and pressure relief valve 1.5" water filter Pump drive Auxiliary drive vehicle (van) Hydraulic (van or box body) Hose reels 1 x 80/100/120m DN10/13 1 x 80m DN16/19 1 x 40m water filling reel 3/4" Financing example: * Internal number: G300103 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Year of construction: 2021, Machine is in good working condition. Hnedpoznbxbjfx Amior

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic table-top tube sealing machine from Neweco is available. Tube materials: LDPE/HDPE/PE/PP/laminate, max. tube diameter: 50mm, max. tube length: 250mm, max. sealing capacity: approx. 720tubes/h, machine dimensions X/Y/Z: approx. 600mm/800mm/800mm, weight: approx. 70kg, estimated counter reading: approx. 80000tubes. Documentation available. An on-site inspection is possible. Hnsdpezpyymefx Amisr

Condition: used, mileage: 99,662 km, power: 74 kW (100.61 HP), fuel type: gasoline, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,060 mm, first registration: 05/2021, fuel tank capacity: 60 l, CO₂ emissions: 163 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Technical information Torque: 170 Nm Number of cylinders: 3 Engine capacity: 999 cc Transmission: 6 gears, Manual gearbox Measures length/height: L2H1 Dimensions (LxBxH): 496 x 185 x 186 cm Weights Empty weight: 1.490 kg Carrying capacity: 705 kg GVW: 2.195 kg Interior Interior: black Consumption Average fuel consumption: 5,9 l/100km (48 MPG) Urban fuel consumption: 6,3 l/100km (45 MPG) Extra urban fuel consumption: 5,3 l/100km (53 MPG) Maintenance, history and condition Service history: Present Hnodpfx Amezk Hbteier APK (MOT): tested until 05/2027 Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front central armrest - Front fog lights - Heated door mirrors - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Partition - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Reversing camera - Sliding side door left - Sliding side door right - Start / stop system - Telephone enabled with Bluetooth - Third brake light

Condition: used, mileage: 10,000 km, power: 125 kW (169.95 HP), first registration: 07/2025, fuel type: diesel, overall weight: 3,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,460 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Internal Number: #559 Mercedes Benz Sprinter 417 CDI, downrated to 3.5 tons, with Rockstroh Drain Jet 100-1 high-pressure flushing system installed Installation: * Rockstroh Drain Jet 100-1 * Auxiliary drive from the Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80 m of DN16 hose * Filling hose reel with approx. 40 m of DN20 hose * Approx. 1,000-liter water tank * Water shortage protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlights * LED interior lighting * LED roof warning beacons * Various storage options * Watertight plastic floor covering with a non-slip surface Special equipment: Hnedpjzlm Hlefx Amior 2nd battery (auxiliary battery), interior, 3-button remote control for central locking, acoustic package, trailer socket 13-pin, DAB tuner (digital radio reception), entry handle on the rear pillar, right side, suspension: stabilization level II, parking brake electric, all-weather floor mats, vehicle without lashing eyes, generator 250 A, transmission lock for auxiliary drive, cup holder in front, rear door (opening angle 270 degrees), connection strip for electrical connections (driver's seat box), instrument cluster with color display, cable duct on the rear door, cable duct on the side wall, marker lights on the side, multimedia system MBUX (touchscreen 10.25" with navigation), auxiliary drive 2 B with reduction gear, parameterizable special module, cross member with integrated step, reversing camera, windshield wiper with rain sensor, fuel gauge for auxiliary heater, battery separator relay additional, fleece battery 92 Ah, front axle reinforced, preparation for transmission oil cooling, assistance for sliding door on the right Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, driver's airbag, anti-slip regulation (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, automatic activation for driving lights, entry handle for sliding door on the bulkhead, electronic brake force distribution (EBV), driving assistance system: active brake assist, driving assistance system: crosswind assist, driving assistance system: lane keeping assist, digital tachograph, speed limiter 90 km/h, body/superstructure: van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, bulkhead, steering wheel (steering column mechanically adjustable), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.0 L - 125 kW CDI CAT, wheelbase 3665 mm, low emission according to exhaust standard Euro 6d-TEMP, sliding door load/passenger compartment right, SCR system (AdBlue technology), safety belt system with warning system (passenger side), safety belt system with warning system (driver side), seat cover/upholstery: fabric, seats in the cab: passenger seat adjustable, seats in the cab: driver's seat adjustable, start/stop system engine, service interval display Assyst, thermal protection glazing (windshield with band filter at the top) For further detailed information and/or pictures, please contact

Condition: used, Second-hand machine Hnedpfx Amozk Nt Soior Features and technical specifications: - Vertical travel of the spindle: 150 mm - Spindle diameter 30 mm - Spindle speeds 3,500–7,000 rpm - with rigid spindle - Motor 2.5–3.1 PS - Table 830 x 700 mm - Slotted discs up to 340 mm - with metal-jaw milling stop (Please note: the Aigner parallel guide shown in the pictures is not included in the scope of delivery!) - with 3-roller feed mechanism Weight: 240 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Hnedou Agh Sjpfx Amisr Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. Hedpfx Amszuuimoienr The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Hnedpfozt I Rnjx Amisr Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Hnodpfxozf H Eze Amier Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM Hnjdpfx Aoyhc T Iomijr - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.