Used Hardfacing Electrode (28214) for sale (469)

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary Ljdpfjwf Rgrex Afpjhg welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), Koma Pigs stunning device This device is suitable for the electrical stunning of animals. Ljdpfx Ajy Edvtjfpshg From 2019, Regulation (EC) No 1099/2009 of 24 September 2009 concerning the protection of animals at the time of killing applies. According to the new regulations, every animal slaughtering plant should record the stunting parameters. This device has a factory-installed recorder of the deafening parameters, which measures the deafening parameters during slaughter and records them on an SDHC memory card placed in the recorder's socket. The device with the recorder gives the possibility of remote assistance when setting the de-stunting parameters. The operation  is based on the principle of automatic measurement of the body resistance of the deafened piece. In the ready-to-run state, there is only a low safe measuring voltage of approx. 15 V at the open electrodes of the forceps. When the electrodes are pressed against the animal's body, the resistance is measured and a deafening voltage of < 400 V is automatically applied, which is automatically switched off when the deafening process is completed (i.e. the electrodes are opened). Two electrodes are applied to the animal's head, while the third electrode, using a pneumatic actuator, is applied to the area of the heart, causing it to stop temporarily, as a result of which the blood stops flowing and the number of congested muscles decreases. By stopping the heart with the third electrode, it is possible to significantly reduce the incidence of adverse factors affecting the quality of the meat.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,350 kg, number of axes: 3, This 3-axis ONA QX4 die-sinking EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The work tank dimensions are 1060 x 750 x 480 mm, accommodating a maximum workpiece weight of 1500 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA QX4 machine we have for sale. Contact us for further details. • Work tank dimensions (L x W x H): 1060 x 750 x 480 mm • Maximum workpiece weight: 1500 kg • Maximum electrode weight: 100 kg • Distance table to headstock: 200–600 mm • Voltage: 400 V Ledpjy Eq Ipofx Afpohg • Frequency: 50 Hz • Current: 25.8 A • Power: 17.9 kVA • Minimum air supply: 6 bar • Generator unit weight: 350 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 40,500 h, This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine. Additional information • Table is equipped with T-slots • Table dimensions: 575 x 500 mm • 24-position electrode changer • Dielectric above table: Up to approximately 420 mm • Maximum workpiece weight: 700 kg Ljdpfox D Hr Sox Afpehg • Connected power: 11 kW plug • Dimensions: Approximately 2300 x 1200 x 2500 mm

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details. • 1x ZK Genius 700 (2015) — 22,056 hours • 1x ZK Genius 700 (2019) — 8,255 hours • Table size: 575 x 500 mm • Max workpiece weight: 700 kg • Generator power: 96 A • Controlled C-axis and rotary spindle • C module (for carbide, PCD, or dressing) • O module (for very fine surface roughness) Lhjdpfx Aeyip Arjfpsg Additional equipment • CO/2 Kraft & Bauer fire extinguishing system • Extraction device • CIMCO Editor for path erosion • 1x Chameleon Quad (2015) automation: • 176 electrode slots • 9 UPC pallet slots with loading drawer • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Lsdpfxsxbqrqj Afpehg Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Width: 2,3 m Height: 1,95 m Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 840 mm, TECHNICAL DETAILS Table size: 840 x 600 mm Dielectric fluid above table: 360 mm Maximum workpiece weight: 1,000 kg T-slots: 4 x 10 mm Distance table - quill without chuck max: 595 mm Distance table - quill without chuck min: 180 mm Travel X-axis: 565 mm Travel Y-axis: 400 mm Ljdpfx Ajyzn Rysfpehg Travel Z-axis: 415 mm Resolution X - Y - Z: 0.001 mm Resolution axis C: 0.001 Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg MACHINE DETAILS Dimensions & Weight Dimensions (H x W x D): 2760 x 1110 x 1840 mm Weight: 2,750 kg Dielectric supply Tank capacity: 400 liters Paper cartridge filters: 4 pcs Generator Dimensions (H x W x D): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 - 120 A Connected load: 15 - 23 kVA

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Lodpfx Asy Skq Rjfpohg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Lhsdpfx Afsyzw I Iopsg Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: excellent (used), Year of construction: 2011, OPS Ingersoll Gantry Eagle 800 Year of manufacture: 2011 Operating hours: 1703 Eagle Powertec control X, Y, Z travel: 550 x 850 x 450 mm Clamping plate: 760 x 1000 mm Max. workpiece weight: 2000 kg EROWA interface Submersible working tank C-axis Chiller Fire extinguishing system Ljdpfxoxiwz Uo Afpohg Remote control 20-station electrode changer 60 amp generator Incl. dielectric fluid (+/- 700 liters) Incl. probe Incl. probe on machine bed Incl. magnet 400 x 200 mm Incl. cabinet with accessories Incl. documentation Machine is powered up for inspection

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2008 Travel paths: X=350 mm, Y=250 mm, Z=250 mm Max. workpiece size: X=800 mm, Y=500 mm, Z=265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table – chuck: 230 - 480 mm APG FORM Generator – working current: 72 Amperes Best achievable surface finish: Ra 0.2 µm Including pneumatic chuck Erowa ITS 50 Including 4-position electrode changer in magazine Lsdpfxsy Eml Ro Afpjhg Machine weight (net): 2000 kg Machine dimensions (L x W x H): 1300 x 1850 x 2500 mm The machine will be cleaned, serviced, and subsequently tested after your order is received. We are happy to commission the machine for you as well.

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Lhodpfx Afsv N Hkcopsg Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2015, operating hours: 10,500 h, Travel range X - Y: 350 x 250 mm Travel range Z: 315 mm Table: Length x Width: 576 x 400 mm Distance: Table to quill: 550 / 240 mm without chuck max. / min. (optional 615 / 305 mm) Dielectric above table: 365 mm Overall dimensions (W x D x H): 900 x 1680 x 2540 mm Total weight (without fluids): 2000 kg Workpiece weight: 500 kg Electrode weight w/o rotary: 50 kg Electrode weight with rotary: 50 kg with manual locking Rapid traverse speed X - Y: 2 m/min Rapid traverse speed Z: 4 m/min Resolution X - Y - Z: 0.001 mm Resolution C: 0.001° Dielectric requirement: 250 liters Generator: genius magic3 Working current: 50 A Suction capacity: 200 m³/h (55 l/sec) Required cooling capacity: 2.5 kW Floor load: 3.5 N/mm² Number of leveling feet: 3 Weight per foot: 1 t Footplate diameter: ø 60 mm Air flow rate: 10 l/min Lsdpfx Ajyvkudefpjhg Required air pressure min.: 6 bar T-slots: Number / width / spacing: 4 slots / 10 mm / 3 x 100 mm Paper cartridge filters: 3 pieces Flushing system: 3 pressure ports 1 suction port 1 fine volume pressure port PROGmodEDM programming software Options 16-position electrode changer Accessories: Tool cabinet with drawers; Probe with 5 mm ball Erowa ER-008638 Magnetic plate 200 x 400 mm (SAV) Various electrode holders

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,200 mm, This 3-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table size: 850 mm x 650 mm • Wear parts, some drive motors, and bearings have been replaced over the years. Lsdox D N Hrspfx Afpehg • Integrated c-axis and integrated electrode magazine. Dimensions Machine Depth 1800 mm

Condition: used, Dalex Works Pms 10-2 Lsdpfx Afeg Rcpxjpohg 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Lsdsqpgntspfx Afpjhg Suction unit with hose guide

Year of construction: 1990, condition: used, Weigl ER - 1500 Brief description: Start hole eroding machines Waldmann & Description: Immediately available from site : Start hole eroding machines Waldmann & Weigl Type ER - 1500 Year of manufacture 1990 table size 500 x 500 mm installation height 400 mm Ledonzh Ivjpfx Afpjhg twist drill 0,1 - 20 mm taps M 2 - M 20 electrodes 1 - 12 mm drilling machine Interkrenn Economy 280 S height adjustment 700 mm throat 180 mm quill stroke 80 mm speed range 120 - 2580 rpm Tool holder MK 2

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Lhedpfx Aewqgh Aofpjg Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Equipment: type plate available, Water-cooled Pulse MIG with Pulse – Double Pulse – XRoot – XStabil – XDeep – XCold. 24-month warranty Kolarc XM 500 20-500 AMP 380 Volt Digital display 2/4 Step / 4 Roller drive Lhodpfxjy Afyhj Afpeg Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Double Pulse Correction / Pulse Frequency Preset programmes / Programme memory Elektrode optie Including: 4-metre UP/DOWN Kolarc welding torch, 4-metre ground cable, gas hose, and 10-metre extension cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2022, condition: like new (used), For sale: a professional Karl Fischer coulometric titrator from the renowned brand Mettler Toledo. This device is from the Compact line and is designed for precise determination of water content in samples, ranging from 1 ppm to 5%. • Model: Compact C30SD • Operating range: o Measurement range: 10 µg – 200 mg of water. o Resolution: 0.1 µg H2O. o Repeatability: 0.3% at >1 mg H2O. • Power supply: 100–240 V / 50–60 Hz • Year of manufacture: 2022 • Additional features: o Color touchscreen with One Click interface (analysis start with a single button). o Automatic recognition of burettes and reagents (SmartSample technology). o Safe handling of chemicals thanks to the Solvent Manager system (automatic reagent exchange without user contact). o Compliance with GLP standards and user management. The device is almost new, in excellent technical and visual condition, and has been regularly maintained. The last qualification was performed in 2024. The set includes: 1. Device: Mettler Toledo C30SD titrator. 2. Original power adapter / complete set of cables. 3. User manual. 4. Additional accessories: Lsdpfx Afjy Tn U Aepshg o Titration vessel with generating electrode (with or without membrane – please contact us to specify). o Double platinum reference electrode. o Set of tubes and lines for reagent exchange.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Cjays Tig 200E ACDC – Gas-cooled TIG ACDC 3 Months Warranty Specifications: 5-200 AMP 230 Volt 2/4 Step Pulse / Pulse Frequency Pre gas / Post gas Start current / End current Up slope / Down slope AC Balans Elektrode option Including: Ljdpfx Afeyzpc Dspehg SR17 Welding torch, ground cable with clamp, gas cable, and manual. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) Lhsdpfxoyx Dn Ne Afpjg

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Max. welding power: 40 kVA Lhsdpfx Asy A Hr Sofpog Adjustable reach: 280 to 550 mm Electrode stroke: 15 to 85 mm Welding parameters for sheet steel: approx. 4 + 4 mm Electrode force adjustable up to 240 daN Cooling water flow 3 l/min Weight approx. 122 kg Welding controller T 90 Mark II Operating instructions and manual available Working stroke triggered by pneumatic foot pedal We have cleaned and inspected the spot welder, the condition is very good, looks like new.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, controller model: CNC MITSUBISHI 32bit, TECHNICAL DETAILS Lhjdpfxjywguvj Afpsg Travel X-axis: 550 mm Travel Y-axis: 850 mm Travel Z-axis: 450 mm Y-axis travel for electrode change and loading position: 1,180 mm Integrated C-axis head, adjustable rotation speed: 10/20 rpm Integrated C-axis head, measurement resolution: 0.001 mm Table dimensions: 850 x 550 mm Load capacity without changer: 50 kg Load capacity with changer: 10 kg Minimum head weight: 200 kg Distance from tool carrier plate to worktable max.: 585 mm Distance from tool carrier plate to worktable min.: 125 mm MACHINE DETAILS Control: CNC MITSUBISHI 32bit Tank dimensions (W x D x H): 800 x 1,100 x 480 mm Dielectric height programmable/automatic: 440 mm Filter cartridge type: Integrated cartridges Electrode changer system / pick-up disc magazine slots: 20 Electrode weight / single electrode: 15 kg Total changer weight: 60 kg Generator FP70: ampere multipulse Electrode changer: 20-position pick-up linear changer Current: 70 A Dimensions & Weight Space requirement: approx. 2.4 x 2.65 x 2.68 m Machine weight: approx. 6,000 kg EQUIPMENT Electric hand-held control unit CO2 fire extinguishing system integrated / Dielectric cartridge filter system

Condition: repair required (used), functionality: limited functionality, Assortment of welding machines, approximately 20 units. Semi-automatic, TIG, electrode. Some machines are still operational, most require repair. Lsdpfxoyy Ipge Afpohg