Used Hexagon Marvel for sale (228)

Condition: like new (used), Included in delivery: 01x Upright protector, second choice (new) Manufacturer: SSI Schäfer Suitable for frame profile type: P213, P215, P217 Material color: yellow Total height: 1,000 mm Total width: 130 mm Bdodpfxew I Dmpj Al Ajh Inner width: 122 mm Suitable for frame profile: 120 mm Total depth: approx. 65 mm Leg dimensions: 75 x 75 mm Material thickness: 4.00 mm Height of deflector: 50 mm Drill hole diameter: 9 mm Drill hole spacing: 250|300 mm Weight / unit: approx. 7.97 kg Number of drill holes: 08 pcs. Including fastening material consisting of: 08x Hexagon bolt M8x30 mm 08x Hexagon nut M8 16x Washer M8 General information about the item: This item is offered for collection only. If transportation or shipment of this item is desired, additional costs will apply, which can be quoted separately depending on delivery location and scope of supply.

Year of construction: 2026, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Revamped 2026 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit Bdjdpfx Aoymav Rol Aeh 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn

Condition: used, Rotating chuck collet holder for pressure collets Collet chuck, collet holder Bdodpfx Aszqgl Ejl Ajh Chuck flange: short taper DIN 55027 size 5 (with 4 tightening bolts M10), taper bore approx. Ø 82 mm Pressure collet type: F 48 / 173E DIN 6343 Large taper diameter: Ø 60 mm Small taper diameter: Ø 48 mm Collet taper: 30° Collet length: 94 mm - 2 pressure collets: 1x Ø 20 mm round collet, 1x 30 mm hexagonal collet Weight: 11.5 kg Good condition

Year of construction: 2007, condition: ready for operation (used), Horizontal Machining Centre with Boring Spindle Starrag Heckert 1 Type: HEC 1600 Athletic Pallet size: 1250 x 1600 mm Pallet load: max. 8.000 kg Number of pallets: 25 pcs Fastems Table indexing: B-Axis 0.001° Table cross travel (X): 2.800 mm Spindle vertical travel (Y): 2.200 mm Column longitudinal travel (Z): 2.100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40.000 mm/min. Rapid X/Y/Z: 40 m/min. Rotaty table 8 rpm Max rotary diameter 3.000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37KW Spindle speed: 20 – 2.500 rpm Boring spindle diameter: 150 mm ATC: 80 pots CNC controller Siemens Sinumerik 840D Hours Spindle 21.400 hours Accessories Hexagon radio measuring probe Coolant unit with vacuum rotation filtration system High pressure coolant through spindle Electrical clear view window Visiport. Laser tool breakage control in working area. Cylinder path interpolation Tool and process monitoring ARTIS. Machines without Fastems = without pallet changers. Bdodpfsguk I Ijx Al Aoh - Pallet changer unit can be supplied by Starrag Heckert. Build year 2007 (Siehe auch weitere Angebote des Inserenten)

Condition: used, TECHNICAL DETAILS - spindle number : 8 - number of turning slides : 8 - number of longitudinal posts : 8 - max. bar clearance : round Ø 22 [mm] - max. bar clearance : hexagonal 19 [mm] - max. bar clearance : square 15 [mm] - max. feed length : 60 [mm] - number of spindle speeds : 20 - spindle speeds : 620 to 6035 [Rpm] - number of camshaft speeds : 24 - spindle stop - max. production : 1-50 [part/min] - transversal slides strokes : 30 [mm] - independent feeds max. stroke : 50 [mm] - main motor power : 10 [CV] - weight : 4 700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel Bdjdpfx Aouhapkel Ash - chip conveyor

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections Bedpfx Alovtp Hbo Asdh - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Year of construction: 2007, condition: ready for operation (used), Horizontal Machining Centre with boring spindle Bdodpsguk Nhsfx Al Ash Starrag Heckert Type: HEC 1600 Athletic (2) Pallet size: 1250 x 1600 mm Pallet load: max. 8.000 kg Number of pallets: 25 pcs Fastems Table indexing: B-Axis 0.001° Table cross travel (X): 2.800 mm Spindle vertical travel (Y): 2.200 mm Column longitudinal travel (Z): 2.100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40.000 mm/min. Rapid X/Y/Z: 40 m/min. Rotaty table 8 rpm Max rotary diameter 3.000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37KW Spindle speed: 20 – 2.500 rpm Boring spindle diameter: 150 mm ATC: 80 pots CNC controller Siemens Sinumerik 840D Hours: Spindle 22.200 hours Accessories Hexagon radio measuring probe Coolant unit with vacuum rotation filtration system High pressure coolant through spindle Electrical clear view window Visiport. Laser tool breakage control in working area. Cylinder path interpolation Tool and process monitoring ARTIS. Machines without Fastems = without pallet changers. - Pallet changer unit can be supplied by Starrag Heckert. Build year 2007

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Bdjdpfx Alsv Raate Ajh Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) Bdodpezcqlujfx Al Aeh • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: new, mileage: 4 km, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * FAN XG 480 Multi-changer 1120-1320 with tail lift * Chassis front design: Aero base plate * Air-suspended cab * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windscreen with sun protection film Bsdoy A Uvfspfx Al Asdh * External sun visor * Two LED work lights on the rear cab wall * Reversing camera, prewiring for 2nd camera * DAF Corner View * Handles, trims, and side panels in cab color * LED headlights, cornering and fog lights * Fixed cab entry * XG cab * LED skylights * LED daytime running lights * Adjustable roof spoiler for XG cab * Lower cab step: Crystal White * Side skirt housing black for cab color Crystal White * Chassis color: anthracite grey * CRYSTAL WHITE * Headlight trim color: Crystal White * Bumper color: Crystal White * Roof spoiler color: Crystal White * Electrically operated roof hatch * Integrated stationary air conditioning * Driver’s seat: Luxury Air * Preparation for pneumatic device * Passenger seat: cinema & table, fabric cover * Driver’s seat with swivel base * Xtra Comfort mattress for lower bunk * Upper bunk * Automatic climate control for cab * Refrigerator and drawer * Armrests on both sides of the driver’s seat * Storage compartment with drawer in center console * Luxury LED interior lighting * ECAS remote control with extended functions * Interior trim color scheme: Exclusive * Dashboard table * Steering wheel with silver accents * Cab interior design: Hexagon * Safety nets at both bunks * Curtains, no dividing curtain * Dashboard design: Plateau * Auxiliary heater with waste heat pump and timer * Wireless charger * Speakers: Exclusive * Digital tachograph, VDO version G2V2A * Speed limiter setting: 90 km/h * PACCAR Connect with navigation * Antennas: Radio, 2x mobile, GNSS Extra: CB * FMS connector, extended and prewired * Infotainment including DAF Truck Navigation * Adaptive Cruise Control with FCW and AEBS-3 * Predictive Cruise Control * Toll system preparation * Driver Performance Assistant * Reversing warning system * Lane departure warning system * Start assist * DAF Side and Turn Assist * Electronic stability control (VSC) * Speed limit recognition * DAF Drowsiness & Distraction Detection * Standard immobilizer * Automatic lift operation * Front air suspension: medium * Front: 8.00 t, air suspension, 161 N * Rear axle load capacity 13.00 t * Tag axle load 8.0 t * Load limiter 11.5 t * Axle load ratio 11.5/7.5 * Lifting device * Rear: 20.00 t, air suspension, SR1344 * Continental * F1, 315/70R22.5 CGW CEPS5 158/150 L Steering ABA 3P * R1, 315/70R22.5 CGW CEPD5 154/150 L Traction ACA 3P * R2, 315/70R22.5 CGW CEPS5 158/150 L Steering ABA 3P * Silver-grey wheel trims * Tire pressure monitoring system * Steel disc wheels, silver-grey * Urge-to-move * Mechanical differential lock * Traction aid 15.0 t * MX-13 engine, 355kW/483HP, cab emblem: 480 * Emission standard Euro 6 * Standard transport, full version * Eco-Fuel * Idle shutdown automatic, 5 minutes * Automated gearbox, TraXon, 12-speed * Automated manual gearbox, full version * Final drive ratio 2.21 * Traction control (ASR) * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 * ZF-Intarder * 2-cylinder compressor with clutch * Driven rear axle with disc brakes * Pneumatic control for parking brake * Wheels

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result Bdsdpfx Along Amkj Aoh OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: Bedpfx Along Ax Se Ajdh - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room Bdjdpondk N Ajfx Al Ajh - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 Bsdpfxoi D D Efe Al Aedh 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing Bjdpfx Aleu Impye Aedh

Condition: used, Year of construction: 2004, turning diameter 250 mm turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Bodpfxst Hxa Te Al Asdh Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Year of construction: 2025, functionality: fully functional, Applications & Customer Benefits: Bdodjxvqhujpfx Al Aoh The Arno® Screen SD Series (SD 1300–2100 / SD 1500–3400 / SD 2100–6000) are robust, semi-mobile screening drums designed for metal recycling and material separation. Ideal for processing metal chips, sheet metal, punching waste, and electronic scrap, they deliver precise three-fraction separation, high throughput, and flexible configuration for various screening tasks. Key Features: • Available in versions with Extension (larger drum area) or Bunker (uniform material feed) • Exclusive hexagonal drum design for superior precision and flow • Adjustable perforation sizes for customizable screening performance • Semi-mobile, foldable structure for flexible setup and transport • Optional Hardox drum plates for extended durability and wear resistance Tech Highlights: Sieve length 2100/3400/6000 mm · Screen Perforation 1-100/6-100/10-100 mm · Screen Perforation 1-100/6-100/10-100 mm · Power 5,5/7,5/7,5 kw · Installation surface 3,3 x 2,1 x 2,9/5,6 x 1,8/9,25 m

Condition: excellent (used), Manual control box for Dea or Brown & Sharpe machines. Bdjdpjfhqxdsfx Al Aeh

Condition: new, Technical data for base plate: Shelving system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x Base plate, new Type designation: FT 211 Suitable for upright frame width: 120 mm Material color: RAL 5010 Gentian Blue Material thickness: approx. 6.00 mm Overall width: 195 mm Overall depth: 105 mm Number of boreholes: 2 pcs Borehole diameter: 13 mm Weight: approx. 1.19 kg | per piece Includes the following fastening material: 02x Hexagon bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, additional costs will apply, which can be requested from us depending on the delivery location and/or scope of delivery. Bdsdpfx Ajw Dnggsl Ajh

Year of construction: 1995, condition: used, CNC control – 11 axes Wenzler: Loading and unloading portal, CNC control: Sinumerik 810, CNC control linked via PLC. Workholding system with 8 power chucks, arranged vertically on a clamping drum: Currently, shaft-like workpieces with a length of approx. 200 mm and a diameter of approx. 20 mm are completely machined using the MTA 8: Machining: Face turning – longitudinal turning – drilling – thread forming – internal hexagon milling – external threads milled. 6 machining stations with: ARTIS – tool monitoring. 4 machining stations with: Internal tool cooling. Space requirement: approx. 40 m². ARTIS cutting force monitoring. Bdjdpfx Aljcqyfms Ash Complete hydraulic system and electrical control cabinets. Complete coolant system. Cleaning system for emulsion. 2 platforms. Chip conveyor. Oil sumps. Palletizing system by Metabo. Extraction system. Various tool holders, clamping devices. Very good condition. Original price of the system: 1.35 million. Machine no. 306. Weight: 17 t.

Year of construction: 2001, condition: ready for operation (used), Horizontal Machining Centre with boring spindle Giddings & Lewis type HMC 410 Pallet size: 1.250 x 1.600 mm Pallet load: 7.000 kg max. Pallet change time: 55 sec. Number of pallets 2 pcs Table indexing: B-Axis 0.001° Table cross travel (X) 3.000 mm Spindle vertical travel (Y) 2.100 mm Column longitudinal travel: Z 1.800 mm Feed: X/Y/Z 1 – 40.000 mm/min. Rapid: X/Y/Z 40 m/min Rotary table 6 rpm Max rotary diameter: Ø2.500 mm Spindle taper: ISO 50 Spindle drive motor: 30 KW Spindle speed: 20 – 5.000 rpm ATC 120 pots CNC controller: Siemens Sinumerik 840D Max workpiece height: 2.000 mm Accessories Hexagon radio measuring probe Loading stations 2 PCS Build year 2001 Bodpfx Aljguk Icj Asdh (Siehe auch weitere Angebote des Inserenten.)

Condition: used, Technical details: diameter: 400 mm passage: 25 mm width: 58 mm revolution per minute: 1800 U/min weight of the machine approx.: 48 kg Power chuck, mechanical Features: Bjdpfeu Nlpbsx Al Aedh Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø 235mm Force tension 40kN Guide on one jaw is broken (see picture) *

Condition: good (used), The scope of delivery includes: 1x Stand Protector: used Manufacturer: Stow Type: Pal Rack NS Material color: yellow Total height: 340 mm Fits frame profile: 85 mm Leg dimensions: 65 x 65 mm Material thickness: 3.00 mm Deflector height: 50 mm Hole diameter: 11 mm Hole spacing: 200 mm Number of holes: 4 Including mounting hardware consisting of: 4x M10x35 mm hexagon screw 4x M10 hexagon nut 8x M10 washer Your contact person: Mr.: Andre Eveing Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Bdedpfx Aljv Uk Rws Ash This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Bjdpfsz Agzdex Al Asdh Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV Bedponfvx Nofx Al Asdh - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site