Used Hilma Hydraulic Vise for sale (16,202)

Year of construction: 2019, condition: new, machine/vehicle number: 2200338511, (H) OCEAN TECH - only the hydraulic modul OCTACC 400-600 M.T.A. Spa. The hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes the pump and storage tank. All hydraulic kits have the following built-in parts in addition to the pump and tank: • Diaphragm expansion vessel • Vent valve • Safety valve • Drain cock • Filling kit with pressure gauge Hydraulic kit as an external component for HOCT 400/500/600 Pump type P1 Number of pumps 1 Nominal output per pump kW 4.0 Available pressure ext. Bar 1.0-2.0 Flow rate m3 / h 5.9 - 56 External execution Tank capacity l 350 Hydraulic kit length mm 1950 Hydraulic kit width mm 785 Fjdpfx Aogulkujdcsph Hydraulic kit height mm 1200 Operating weight kg 711 Serial number: 2200338511 Year of construction 2019 Condition: optically 1, technically 1 Storage unit, new Price: on request in euros (plus VAT from Nettetal) - 12 months warranty (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar Fpedpfed S D Dkex Adcsh -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

Condition: used, Year of construction: 1980, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 450 mm table surface area 330 x 270 mm table height over floor 970 mm Fpedey Ig Nbjpfx Adceh ram surface 240 x 100 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (make Pilz), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1985, pressure 6,3 t Fjdpfx Asyfwvledceph stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: new, functionality: fully functional, Year of construction: 2023, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Fjdpfxowuykxj Adcoph

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK Fpedpey D I Nnsfx Adcoh

Condition: used, Year of construction: 2024, operating hours: 615 h, power: 100 kW (135.96 HP), empty load weight: 10,000 kg, fuel: diesel, Equipment: air conditioning, • 615 hours • Variable flow • STEELWRIST QCS50 quick coupler • STEELWRIST X12 S50 tiltrotator • 2.25m boom • Automatic idle • Safety valves • High-flow bidirectional line • Low-flow double-acting line • Twin tires • 4-wheel steering with crab steering mode • Front blade + rear stabilizers • Rear and side cameras • Air conditioning • Suspended and heated seat • LED work lights • 400 mm buckets • 1400 mm digging bucket • Pallet fork • 5-year / 3000-hour warranty Fpodpfx Ajzb Ru Hsdcoh

Condition: used, Riding Lawn Mower ETESIA Type Hydro 124 D Year of manufacture: 2003 Power: 15.5 kW Cutting width: 1240 mm Grass catcher: 600 liters = over 100 kg of grass Turning radius: 1250 mm Travel and working speed: max. 16 km/h Fjdpfxjy Ai Nts Adceph 3-cylinder Lombardini FOCS 903 diesel engine Displacement: 916 cm³ Power: 22 HP at 3600 rpm - Water-cooled - Two counter-rotating blades, 65 cm long with a 6 cm overlap - The powerful suction lifts the grass upright before cutting - Central rear discharge - Hydraulic high-tip emptying, controlled from the driver's seat via toggle switch - Electric cutting height adjustment from 44 to 140 mm - Hydrostatic drive with rear-wheel drive via hydraulic motors - Hydraulic differential lock - Hydraulic power steering - Twin hydraulic connections for operation of front-mounted attachments - Adjustable steering column - Hour meter: 1,539 operating hours Overall width: 1,280 mm Length: 2,800 mm Weight: 716 kg Good condition

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 110mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece Fpjdpfx Adjlxulcscsh -Dimensions: 810/155/H410 mm -Weight: 66 kg/pc.

Condition: good (used), functionality: fully functional, Internal article number: 26048 Hydraulic bandsaw Manufacturer: Kasto Type and year of manufacture are unfortunately no longer identifiable. + Coolant pump Saw blade length: 400mm Clamping range: 250mm Max. clamping height: approx. 250mm Fsdpfjzb I Hgjx Adcoph LxWxH: 170 x 100 x 110cm Weight: approx. 250kg The machine is fully functional and can be inspected by appointment on our heated storage area of over 500m².

Condition: used, mileage: 896,764 km, power: 324 kW (440.52 HP), first registration: 03/2007, fuel type: diesel, tire size: 385/55/22.5, wheelbase: 4,770 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2007, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, = Additional Options and Accessories = - (Roof) spoiler - Aluminum fuel tank - Speed limiter - Berth - Radio/CD player - Side mirrors with electric adjustment - Transceivers - Sun visor - Stability control - Digital speedometer - Fog lights - Power take-off (PTO) = Further Information = Cab: standard Brakes: disc brakes Front axle: tire size: 385/55/22.5; suspension: leaf spring Fpsdpjy Ul Ezsfx Adcoh Rear axle 1: tire size: 315/60/22.5; suspension: air suspension Rear axle 2: tire size: 315/60/22.5; suspension: air suspension Unladen weight: 8,620 kg APK (technical inspection): valid until 09/2026 Damage: none License plate: BS-TV-22

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 80 t, stroke length: 350 mm, table width: 1,400 mm, table length: 840 mm, oil tank capacity: 230 l, total width: 1,600 mm, total height: 3,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, NEW EXNER hydraulic testing press, type PG 80 Number of press cylinders: 2 Nominal force (adjustable): 2 x 400 kN Fpjdpfxjza Em Uj Adceh Retraction force: 2 x 150 kN Ram stroke: 350 mm Ram width: 1400 mm Ram depth: 840 mm Guide length: 750 mm Ram speed, load up to 100%: approx. 0-10 mm/s Ram speed, retraction: approx. 0-20 mm/s T-slots, table/ram according to DIN 650 = 22 mm Installation height – stroke at top: 600 mm Table width: 1400 mm Table depth: 840 mm Column clearance, front: 1000 mm Column clearance, side: 600 mm Table height above floor: 1100 mm Nitrodyne control / retraction, spring force to be compensated under spring tools: max. 150 kN Accuracy: Maximum deviation of plan parallelism from the ram surface to the table surface (from right to left) in free travel (absolute) < 0.05 mm in eccentric loading with maximum force (absolute) < 0.10 mm Table/ram deflection at nominal force and 2/3 surface coverage: 0.10 mm Starting accuracy U.T. without mechanical depth stop: ± 0.05 mm Optionally, a servo roll feed can be offered and installed.

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Fodpof Nwvfofx Adceph

Condition: used, Year of construction: 1997, Thread(e) e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Including finder for pegging and setup Fpsdpfx Asizuhpsdcoh Assortment of tools is included in the price Punching force: 1000 kN mass: 2400 kg punching force: 1000 kN

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized rear stop with fine adjustment via handwheel up to 1000 mm Fjdpfjr D Tnwsx Adcjph cutting length limitation knife sharpened Weight: 6,800 kg

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Fjdeqmvlropfx Adcsph Motorized rear stop up to 1000 mm with fine adjustment via handwheel Crown angle adjustment knife sharpened operation manual Weight: approx. 1400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning Fpedey T R Swjpfx Adcjh • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Fedpfx Adey T R Ryjcjph Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Equipment • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. A live demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2000, Technical specifications: Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Fpsdpszbmw Defx Adcoh Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), mileage: 852,438 km, power: 324 kW (440.52 HP), first registration: 02/2012, fuel type: diesel, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 10,516 l, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, central locking, cruise control, differential lock, electric window regulation, onboard computer, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Differential lock - Central lubrication system = Further Information = Fjdpfsy Ua Rrex Adcoph Transmission: ZF, automatic Unladen weight: 7,360 kg Payload: 11,640 kg GVWR: 19,000 kg Cargo volume: 700 l Please contact Vitali Lenda for further information.

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm Fsdpfxsy S D Nme Adcoph table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: used, thickness of jaw 225 mm Total length: 700mm Fpodpfxoy S Dyrs Adcjh Jaw width: 205mm Total height: 160mm Span: 300mm Weight: 105kg

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg length in total 770 mm Allmatic 160 hydraulic vice with adjustable clamping pressure Span S1/mm: 0-152 Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm Fpodpfjy S Dtrjx Adcoh - incl. 2x clamping claws - Without vice spanner

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed Fjdpekvmi Sjfx Adcjph 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Fpodpfx Adowp Nv Hscjh Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.