Used Jensen Drain Valve for sale (7,124)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Ndsdpsfz Ax Ssfx Aazob The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: not inspected (used), Year of construction: 2010, functionality: limited functionality, Featuring a robust design and ISC-B20 touch screen control, our CLB-800 brine mixing station is jacket cooled and efficiently mixes up to 800 liters of brine. Operators simply add ingredients to the hopper, which are then pumped into the brine mixing tank via the machine’s water line. The tank continues to fill with the amount of water necessary to create the ideal mixture. The final blend is continuously circulated throughout the tank. - Stainless steel construction - 800-liter capacity - ISC-B20 touch screen computer control stores up to 99 product programs - Double jacketed cooling - Hermetically sealed cooling aggregate with glycol - Electronic temperature control Ndjdpjv Id Tfsfx Aazob - Filling hopper for additives - Drain valve enables easy unloading or brine may be pumped to dedicated lines - Glass gauge for fluid level measuring

Condition: used, functionality: fully functional, tank capacity: 30,000 l, total height: 7,200 mm, inner diameter: 2,500 mm, outer diameter: 2,900 mm, overall weight: 6,000 kg, wall thickness: 10 mm, wall structure: single-walled, number of chambers: 1, manhole diameter: 600 mm, pressure (max.): 3 bar, Buffer Storage Tank – 30,000 L, Vertical, Insulated Volume: 30,000 liters Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Overall height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900 °C Medium: Water Density: 1,000 kg/m³ Bottom wall thickness: approx. 11 mm Shell/cylinder wall thickness: approx. 10 mm Material / Characteristics Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Cladding: smooth aluminium sheet (weatherproof) Mineral wool will be newly installed, i.e., insulation thickness can be chosen freely. Equipment Mounting: Feet Number: 4 Attachment: fixed Top/base type: dished end (Klöpper head) Bottom/base type: dished end (Klöpper head) Connections: - 1 manhole DN 600 with blind cover Ndedpfx Aexdknkeazsb - 7x 1/2'' sockets for temperature sensors - 2 lifting lugs on the shell - 2 lifting lugs on the top head - 2 lifting lugs at the tank feet - 1 drain 2'' at the tank bottom, routed to the outside and terminating in a 2'' ball valve - 1 vent Ø33.7 x 3.6 mm, routed downwards laterally within the insulation and ending in the manhole cover enclosure - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center - 1 connection DN 125, flanged externally, ending internally in a 90° bend in the tank center Documentation: Drawing

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 V-belts Nodpfxoyix Hts Aazedb - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Ndodpfoyltvuox Aazeb Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Ndedpfx Aajfz Dvcezeb The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: good (used), Used stainless steel container / transport container / IBC Last use: Chemicals Item number: 10725 Volume: 1000 liters Type: Vertical in galvanized stacking frame Height of feet: 100mm Ndsdpordwriefx Aazjb Material (wetted parts): 14301 / AISI 304 Manhole: Ø 400mm Design: Single-walled Operating pressure according to type plate: ATM Tank dimensions: Total height: 1600mm Total length: 1200mm Total width: 1020mm Materials: Interior: 14301 / AISI 304 Outer parts: galvanized steel Equipment: Nameplate: Yes Outlet diameter: 45mm Distance drain to floor: 250mm Outlet valve: Ball valve

Condition: good (used), - Made of stainless steel - Standing on legs Nsdpfxszc H Uro Aazodb - Material: 1.4301 / AISI 304 - Capacity: approx. 5,000 liters Equipment: - Square manhole - Drain valve, ball valve DN 40 - Clear outlet, ball valve DN 40 - Level indicator - Sampling valve - Dome DN 500 - In good condition Dimensions: - Width: 1,400 mm - Depth: 1,800 mm - Shell height: 2,500 mm - Ground clearance: 150 mm - Overall height: approx. 2,900 mm

Condition: used, Dimensions 150 x 160 x 200 cm. Main outlet diameter 10 cm. 2 valves front and back for draining. Ndsdpezg Naqjfx Aazjb

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 2,618 h, load capacity: 2,000 kg, lifting height: 4,000 mm, free lift: 1,900 mm, load center: 500 mm, fuel type: electric, mast type: duplex, battery capacity: 465 Ah, battery voltage: 80 V, DGUV certified until: 09/2027, fork length: 1,200 mm, total height: 2,550 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, lighting, sideshift, Linde E 20 electric forklift with the following specifications: * Operating hours: 2,618 Ndodpfx Aaozrr H Djzeb * Lifting capacity: 2,000 kg * Lifting height: 4,000 mm * Overall height: 2,550 mm * Year of manufacture: 1998 LINDE 2.0-ton electric forklift with a semi-cabin, very good tires (rear tires new), duplex mast with full free lift, side shifter, 4th valve, multi-lever, two-pedal control, lighting, fork length 1,200 mm, charger. Includes service according to LINDE manufacturer's specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Please call to schedule. Sale is exclusively to commercial businesses. Subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our website!

Condition: excellent (used), - Fryer model: IEF 224 - Serial number: J00015 - Dimensions (W x D): 600 x 610 mm - Tank dimensions: 2 x 200 x 400 mm - Capacity: 16 L (2 x 8 L) - Electronic temperature control - 2 baskets - Drain tap with valve - Power: 2 x 9 kW - Voltage: 400 V - Fryer model: AEF 224.150 - Dimensions: 600 x 700 mm Nodpfx Aowyby Esazodb - Tank dimensions: 400 x 400 mm - Capacity: 16 L - Electronic temperature control - Drain valve with tap - Power: 18 kW - Voltage: 400 V

Condition: new, Year of construction: 2025, Spray cleaning system, type S80 (special edition) Robustly designed parts cleaning system with basket drive via gear motor, made of stainless steel 1.4301, - 3-sided arrangement of nozzles made of stainless steel, including stainless steel wide-spray nozzles Nedpfxopm Ed Ej Aazjdb - completely made of stainless steel, externally powder-coated in RAL 7016 - automatic steam extraction fan - coarse filter (removable basket) in the return line - HMI for program setting - complete insulation of tank and lid - electronic/mechanical lid monitoring - washing pump made of stainless steel (manufacturer: Lowara) - pressure regulation of the washing pump including pressure gauge - level sensors / dry-run protection - drain connection with ball valve - mobile version on rollers - basket diameter: 780 mm - usable height: 430 mm - max. load weight: 100 kg - spray pressure: 3 bar - tank volume: 130 liters - heating: electrically adjustable (RT - 80°C) - connection power (electrical): approx. 6.5 kW - system dimensions (W x D x H): 1,050 x 1,112 x 1,850 (h) mm (with lid open)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DZ-202409012, heating capacity: 3 kW (4.08 HP), power: 1.5 kW (2.04 HP), operating temperature: 95 °C, usable tank capacity: 99 l, Equipment: documentation/manual, The machine was purchased new from the manufacturer in 2024, has only been used briefly, and is therefore in like-new condition! The system consists of four independent chambers and enables a complete cleaning process, including washing, rinsing, and drying. TECHNICAL DETAILS Number of units: 4 Housing material: Stainless steel AISI 304 Wall thickness: 2 mm Units: Ultrasonic washing chamber and ultrasonic rinsing chamber Ultrasonic power: 1,500 W (30 transducers) Frequency: 40 kHz Heating power: 3 kW Maximum operating temperature: 95 °C Circulation and filtration system Dynamic lifter system (“up & down” technique) for enhanced cleaning performance Final rinse chamber Tank capacity: approx. 99 l Heating power: 3 kW Hot air drying chamber Heating power: 3 kW High-performance blower Temperature control MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,880 x 1,350 x 1,180 mm Machine weight: approx. 480 kg EQUIPMENT Ndodpfx Aeyx Annjazsb Separate fluid supply and discharge for each chamber Suitable for use with industrial cleaning chemicals Stainless steel wire baskets Drain valves and level sensors Electronic control system Complete technical documentation and certificates The washing system is designed for precision cleaning of machined metal parts, particularly for the removal of machining oils, chips, and fine particles following turning, milling, or grinding operations.

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C Ndjdpfx Aaexvr Upszjb - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: as good as new (ex-display), Year of construction: 2025, KAESER compressed air tank 5000 liters standing, galvanized 11 bar include fittings Year of construction: 2025 High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Technical specifications: Volume: 5000 liters Overpressure max: 11 bar -Diameter: 1400 mm Nsdpekzkfrefx Aazsdb Container height: 3570 mm Mass: 1050 kg Connection compressed air inlet: 2x DN 100 Connection compressed air outlet: 2x DN 100 Connection safety valve: G 2 " Connection condensate drain: G 1/2 " Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 50 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Ndsdpfxsflpmqj Aazsb • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, functionality: unexamined, Jensen rotary distributor with 3 additional inputs For Ndedpoy Uh Ifjfx Aazeb Bauch washing machine

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid swelling when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers Ndsdpfxsivdvvo Aazeb + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters/hour - Peak cooling capacity*: 330 liters/hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Connection values: 230 V - 50 Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 20 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2020, condition: new, Title: Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year of Manufacture 2020 – NEW / unused Brief Description: For sale are unused, original-packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in new condition, have never been put into operation, and are originally packaged by the manufacturer. Manufacturer: Strassburger Filter GmbH + Co. KG (Germany) Model / Type: SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture: 2020 Serial Number: e.g. 032003303920 (other serial numbers available) CE Marking: Yes Condition: New / unused Original packaging Never installed, never used in production Stock item Quantity available: 3 identical machines available New Price: New price €94,000 per unit Nodex Ihufepfx Aazsdb Design / Material: Completely stainless steel Plate and frame filter press Gasketed plates Pharmaceutical / Biotech design Hydraulic closure including hydraulic unit CE-compliant Technical Data: Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight: Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight of filter frame: approx. 480 kg Weight of plate pack: approx. 120 kg Plate Pack: 14 filter plates 13 filter frames 1 end frame 1 baffle plate 28 filter layers per configuration Hydraulics & Drive: Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections: Product inlet and outlet DN25 Vent / drain DN15 Connections according to DIN 11864-2 Drip tray available Application areas: Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location: Germany Inspection possible by appointment Available immediately

Condition: used, This listing is for Biotek Valve module Fluidic Component The unit is in full working condition and ready for immediate use The BioTek Valve Module is a fluidic control component designed for use with BioTek microplate washers and automated liquid-handling systems. It provides controlled switching between fluid supply lines and is suitable for laboratory washing applications. The module is supplied as an individual fluidic component. Ndsdozqf H Ispfx Aazjb Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2025, overall weight: 244 kg, total height: 2,270 mm, pressure: 11 bar, New KAESER vertical compressed air receiver, 1,000 liters, galvanized, 11 bar Njdpfoqt A Iqox Aazjdb (incl. fittings kit and pressure gauge assembly) Year of manufacture: 2025 High-quality compressed air receiver with a galvanized finish. Hot-dip galvanized inside and out in accordance with DIN EN ISO 1461. Connection ports designed for tapered threads. Technical Specifications: Volume: 1,000 liters Max. working pressure: 11 bar Diameter: 800 mm Receiver height: 2,265 mm Weight: 244 kg Air inlet connection: 2 x G 1 1/2" Air outlet connection: 2 x G 2" Safety valve connection: G 2" Condensate drain connection: G 2" Receiver Certification: Directive 2014/68/EU (PED) Inspection opening according to AD2000: 2 x handhole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface coating: Galvanized Convenient leasing options for new equipment are available through our partner bank. Feel free to visit our retail store. We constantly maintain a large stock of new and pre-owned compressors!

Condition: good (used), Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve -Manufacturer: Bekomat Ecoair, condensate drain type KA02 ACO AO / AK 05 Nsdpfx Aevuzpkeazjdb -Voltage: 230 VAC/50 Hz Temperature: 1 °C/ 60 °C -Nominal pressure: max. 16 bar -Quantity: 3 available Price: per piece -Transport dimensions: 220/140/H150 mm -Weight: 1.6 kg/pc.

Condition: used, Year of construction: 2023, operating hours: 777 h, mileage: 22,187 km, empty load weight: 16,000 kg, Operating hours: 777, First registration: 27.09.2023 _____ Engine: PX-76 inline six-cylinder diesel engine, 6.7 liters. Output 194 kW (264 HP) at 2300 rpm. Torque 1000 Nm at 1000-1700 rpm. Version LF 260 FA 4X2 truck, 16t D0555471. Driven rear axle with mechanical differential lock. Brake system: Exhaust brake, integration of function with electronic brake system (EBS). When activated via steering wheel switch, the exhaust brake engages after releasing the accelerator pedal. Emission class: Euro 6. Transmission: Manual gearbox, 6 speeds. Transmission: 6-speed manual gearbox 6S1000 OD, 6.75-0.78. Wheelbase: 3250 mm. Chassis weight: Technically permissible chassis weight 16,000 kg. Cab: Day Cab with steel bumper, tinted windows, and electric window lifters. Electrically heated main mirrors and wide-angle mirrors. Cab width 2130 mm. Exterior sun visor in green above the windshield. Daytime running lights, bumper-mounted lighting units with combined fog lamp and cornering light function. Electric adjustment of main mirrors. Central locking with exterior light checking function, includes 2 remote controls and 2 keys with transmitters. Air-sprung luxury driver's seat with adjustable damping and pneumatic lumbar support. Seat cushion heating, integrated headrest. Three-point seat belt. Velour seat cover. Armrest on driver's seat, manually controlled air conditioning with recirculation function. Communication and driving management: Radio/USB player, two-speaker sound system, truck telephone, hands-free kit with SIM card slot (for 2G or 3G network) and Bluetooth antenna. Multipoint pairing allows simultaneous operation of two additional phones via the steering wheel. Paintwork: Cab color RAL 2011. Standard basic equipment: Hydrostatic transmission HGB2 Max. 1400Nm and approx. 340 HP. Mechanically shifted transfer gearbox with integrated hydrostat for stepless speed control during sweeping operation. Transport driving 0-85 km/h via standard gearbox (cruise control optional). This working drive allows stepless adjustment of sweeping speed forwards (1-40 km/h) and reverse (1-10 km/h) via an electronic accelerator pedal (Easy-Drive). At the same time, suction power can be regulated independently of travel speed between ECO and Max. Fuel tank in sweeper body, approx. 190 l capacity. Hydraulic fan drive. Hydraulic oil tank 50 l. Engine compartment fitted with sound-insulating material, fan exhaust directed upwards through vehicle superstructure, stepless electronic turbine adjustment, single hydraulic pump. Nodpfx Aex S Tp Ajazjdb Sweeper container: Sweeper container (with tailgate and mesh) and water tank made from 1.4003 stainless steel. Sweeper container gross volume 6.5 m³, container floor from chrome-alloyed stainless steel 1.4301. Sweeper container tipping angle approx. 55 degrees, dirt chute of 1.4003 stainless steel, inspection flaps on right and left, dirty water drain via clamping hose and 2" drain valve, air guide mesh manually foldable, 2 amber beacon lights at rear on KGB, suction pipe flap mounted externally on container, hydraulically operated, 4-stage...

Condition: good (used), - Made of AISI 304 stainless steel - Galvanized steel frame Equipment: - Tap - Ball valve for clear drain - Drain for residual water - Dome NW 400 Dimensions: - Length: 1250 mm - Width: 830 mm - Height: 1670 mm Ndedjwff Ecepfx Aazob

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Nsdjywkc Ropfx Aazedb Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.