Used Kühlschrank Duo for sale (434)

Condition: used, mileage: 99,811 km, power: 175 kW (237.93 HP), first registration: 02/2019, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 4 m³, loading space length: 3,800 mm, loading space width: 2,330 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, tail-lift, ATEGO 1224 K TIPPER, 2-sided with rear-mounted crane + ZAA-trailer coupling * Crane: HIAB X-DUO 078 BS-2 with 5th and 6th control circuits, including grabber * Maximum hydraulic reach: 7.30 m, lifting capacity 1,200 kg * Vehicle ID for customer inquiries: 4150 * Crane * Engine version: Euro VI with OBD-C * Active Brake Assist * Rear axle differential lock * Air conditioning * Middle seat with 3-point seat belt * Manual transmission * Lane departure warning assistant * Environmental sticker (green) * G 145 trailer coupling for ZAA * Ringfeder trailer coupling * Fully documented service history * Stability control assist (ESP) * Trailer brake, 2-line system * Three-seater cabin * Electronic brake system with ABS and ASR * Comfort driver's suspension seat * Electrically operated windows, both sides * Gearbox: G 90-6/6.70-0.73 * Engine brake, standard system * NA MB 60-2c, MPA low, N-speed * PTO, single * Particulate filter * Digital tachograph, EC, RPM * Cruise control * AdBlue tank 25 l * 12V trailer socket, 13-pin, fixed to frame, LED * 24V trailer socket, 15-pin * Body type: tipper/tipper semi-trailer * Roof hatch/ventilation flap roof * Rear wall of driver cab with window * Weight option: 11.99 t (4.9/8.1) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Rear spring 8.1 t, parabolic * Plastic tank 120 l, left * Meiller pump, 7-piston, type 270/63 Bjdpfxjwm Tbzo Al Aswu * Engine: OM936, inline 6, 7.7 l, 175 kW (238 hp), 1,000 Nm * Wheelbase 3560 mm * Inline 6-cylinder engine * S-cab ClassicSpace, 2.30 m, tunnel * Extreme heavy-duty rear axle stabilizer * Prepared for toll recording * Pre-installed for retrofit of loading crane * Maintenance documentation * Crossmember for retrofitting AHK G145 ZAA * Tubeless tires, 265/70 R 19.5 VA * Front spring 5.1 t, parabolic * Tail lift (commercial vehicles only) * 2/3-door No liability for printing or typing errors Sale only to commercial customers Subject to prior sale and errors; modifications, prior sale and errors expressly reserved. The description serves identification purposes and does not constitute a legal warranty under the German Sale of Goods Act. The purchase contract description shall prevail. * TOP SERVICE + QUALITY * We can provide a LEASING-FINANCING-INSTALLMENT PURCHASE offer Warranty insurance possible on request via insurer * TÜV / UVV LBW / Tachograph inspection and OBU installation possible via local partners * Temporary export license plates for 30 days All customs export documents possible but must be requested individually * Toll-Collect registration can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH: Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * --- Visit our website at * Over 200 vehicles always in stock

Condition: used, maximum load weight: 12,760 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2020, next inspection (TÜV): 09/2027, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, total length: 9,500 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, tail-lift, ISO box trailer, drive-through design, with LBW MBB Palfinger 2,000 kg ABS EBS Disc brakes Extendable drawbar Air suspension Plastic toolbox Duo Matic brake connection Plastic floor Galvanized frame GVWR 18,000 kg Unladen weight 12,760 kg Tires 385/65R22.5, 70% remaining Bedpfsz Em Dbox Al Aewu Vehicle identification number (VIN) 2481. For inquiries about the trailer, which is in very good overall condition and comes from its first owner. No liability is assumed for typographical and data transmission errors. Subject to change and prior sale. Daily cash purchases of used commercial vehicles, construction machinery, trailers, and semi-trailers from model year 2000-2026.

Condition: used, mileage: 39,502 km, power: 294 kW (399.73 HP), first registration: 09/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, MAN TGS 26.400 skip loader truck Nencki body * First registration: 05.09.2023 * 39,502 km * Automatic * EURO 6 * 294 kW * 9037 cc * Unladen weight 12,200 kg * Payload 13,800 kg * Gross weight 26,000 kg * Train weight 40,000 kg Bodpfx Asv I Illsl Aswu * 1st axle 8,000 kg * 2nd axle 11,500 kg * 3rd axle 8,000 kg * Double axle (axle 2-3): 19,000 kg * Retarder * 2-seater * Radio * Hands-free system * Automatic climate control * Liftable steering axle * Rear view camera * Lane departure warning * Distance cruise control * 3 axles * ROCKINGER trailer coupling * DUO Matic * Nencki skip loader body (FTC 22.007 & serial number 977702 / 2023) * Air suspension 3rd axle * Tires/Tyres: 1st axle 315/80 R 22.5 8/8 mm * 2nd axle 315/80 R 22.5 20/20/20/20 mm * 3rd axle 315/80 R 22.5 10/10 mm * All information without guarantee * Further info and criteria for additional service * Repainting, retrofitting possible * Short-term license plate / customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have worked with various leasing companies for many years and can therefore find the optimal financing for every customer. We can often also support customers with weak credit and establish contact with good leasing partners. * Own workshop * We speak Polish. * We speak English. * Repainting in your desired color is possible in our company at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your choice and have the truck checked technically and visually. If, contrary to expectations, a defect should occur, we can quickly and effectively fix it in our workshop. Furthermore, we can deliver your new used vehicle for an extra charge Europe-wide.

Condition: used, mileage: 233,000 km, power: 250 kW (339.91 HP), first registration: 08/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MAN BUILDING MATERIALS VEHICLE TGM 18.340 New clutch 30 km ago !!!!! Manual transmission Air suspension Bodpfxsvxmpko Al Aswu Air conditioning Tires approx. 70% AHK German registration 1 owner Crane HIAB Type: 144 B-3 DUO 4-way support 3 x hydraulic thrust Hydraulic stone grab Approx. 11 m- 1200 KG lifting capacity etc.....

Condition: excellent (used), functionality: fully functional, empty load weight: 5,630 kg, maximum load weight: 27,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, total length: 12,610 mm, total width: 2,500 mm, total height: 1,150 mm, color: black, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Göbel / System Trailer Interchangeable Chassis COS27 Rare special equipment! For sale is an exceptionally equipped Göbel 3-axle interchangeable chassis / container chassis in very good condition. The trailers have been used very little and have been well maintained. Due to the extensive special equipment, this is not a standard container chassis, but a technically very interesting and rare configuration. Of particular note is the combination of WABCO OptiLoad and a BPW trailing steering axle with Active Reverse Control. The first axle is designed as a lift axle with WABCO OptiLoad. The system ensures a permanently optimized fifth wheel load and load distribution via automatic air spring relief. The rear BPW steering axle steers in normal driving operation and also provides active support when reversing. The steering can be additionally influenced via the existing remote control. Especially when maneuvering and in confined spaces, this design offers a significant advantage over a conventional container chassis! The chassis is designed for various container configurations and features a twist-lock system and a gooseneck design. Equipment / special features: 3-axle interchangeable chassis / container chassis WABCO OptiLoad on the first axle first axle as a lift axle BPW trailing steering axle BPW Active Reverse Control steers when reversing remote control for the steering system WABCO EBS braking system Bodpfsz D Umusx Al Aewu WABCO SmartBoard / TIM with ECAS operation gooseneck design twist-lock container locking accommodation of various container sizes possible 2 stainless steel toolboxes with high-gloss polished front flap, approx. 1,000 x 500 x 500 mm ALCOA Dura-Bright aluminum rims 11.75 x 22.5 inches tires 385/55 R22.5 with M+S and snowflake symbol DUO-MATIC air connection 15-pole electrical connection complete lighting system in LED design additional reversing lights high-quality KTL coating additional powder coating in RAL 9005 deep black The original new price for this extensive special configuration was over 50,000 € net. The main inspection (HU) will be renewed before delivery. Several interchangeable chassis are available. Two largely identically equipped interchangeable chassis are available in this design. Available designs or container accommodations: 10 ft 20 ft 30 ft 40 ft In addition, another interchangeable chassis for a 20-foot container is available. If desired, a suitable design / material container is also available. Further information on the individual chassis, container dimensions and available combinations is available upon request. A viewing is only possible after prior arrangement. Image note: AI-assisted adjustment of background, vegetation and lighting mood. Vehicle unchanged.

Condition: good (used), Year of construction: 2018, operating hours: 18,545 h, load capacity: 2,000 kg, lifting height: 2,024 mm, fuel type: electric, mast type: duplex, construction height: 1,655 mm, empty load weight: 1,100 kg, mileage: 18,545 km, Electric DUO stacker Brand: Still (Germany) Year of manufacture: 2018 Capacity: 2,000 kg Lifting height: 2,024 mm Mast height: 1,655 mm Bjdpfez Drdwex Al Ajwu INITIAL LIFT, ideal for uneven floors Battery: 2018, with charger Automatic filling system Watch the video on YouTube

Condition: used, mileage: 137,604 km, power: 152 kW (206.66 HP), first registration: 11/2018, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2027, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 6,970 mm, total width: 2,370 mm, total height: 2,900 mm, loading space length: 3,950 mm, loading space width: 2,310 mm, loading space height: 1,800 mm, Equipment: ABS, air conditioning, central locking, navigation system, Double-cab pickup truck with a flatbed and tarpaulin, 6 seats ABS Rear axle differential lock Trailer hitch with ring coupling Additional trailer hitch with ball coupling Two-line pneumatic brake system Additional Duo Matic connector 2 x stainless steel toolboxes on the left and right Fuel tank lock Plastic fuel tank 2 x sliding doors on the left and right for the passenger compartment Front mirror Electrically adjustable and heated rearview mirrors Bedpfxjz E T Umj Al Ajwu Aluminum side panels Aluminum air reservoir Driver's seat with air suspension Passenger seat with air suspension Automatic transmission Adjustable steering column bracket Rear axle with air suspension Electrically operated windows, 2-way Air conditioning Navigation system Engine brake Cruise control Rear axle stabilizer bar Radio Cigarette lighter Wheelbase 3700 mm GVWR 7,490 kg Curb weight 2,390 kg Tires 225/75R17.5, 60% tread remaining Vehicle identification number for inquiries: 2479. Vehicle in very good overall condition, well-maintained, from first owner. No liability for typographical and data transmission errors. Subject to prior sale and errors. Daily cash purchase of used commercial vehicles, construction machinery, trailers, and semi-trailers from model year 2000-2026. Leasing and financing possible through our partner bank. Rental possible. Nationwide delivery possible.

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Bsdpfx Alozl Ap Ne Aewu

Condition: used, empty load weight: 5,450 kg, maximum load weight: 12,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2026, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: grey, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 40816 Krone, S 24 * Year of manufacture: 2012 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Tail lift * Alloy wheels * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duo-matic air coupling * 15-pin plug connector * Lifting and lowering device * Rear support legs * Inspection valid until 08/2026 (HU/AU) * Suspension type: Air * Gross weight: 18,000 kg * Unladen weight: 5,450 kg * Payload: 12,550 kg * Authorised gross weight: 18,000 kg * Axle manufacturer: BPW * Tyre condition 1st axle: 20% / 20% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 30% / 40% - Tyre size: 385/65 R22.5 Bwedpfxjyunzqe Al Asu * Tyre sizes: 385/65 R22.5 * Internal dimensions: L = 7,700 mm, W = 2,500 mm, H = 2,300 mm * Internal volume*: 44 m³ * Pallet spaces: 19 * Trailer manufacturer: Krone * Body: Ewers swing wall body * Tail lift: BÄR BC 2500, lifting capacity 2,500 kg Disclaimer: Subject to changes, prior sale, and errors. You will find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing solutions * Application for all (export) documentation * Arranging export / customs plates * Vehicle reconditioning: new tarpaulins, lettering, repainting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Contact our trained specialist staff – we are happy to advise you.

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Bwedpfow Dm Hrjx Al Aju

Condition: new, machine/vehicle number: 1040, REFRIGERATOR, 2 DOORS NEW, up to +2°C Bedpfx Aljc Utdfo Aswu with 6-month warranty made of stainless steel 230 V connection If you have any further questions, please call us or send an email. Thank you in advance.

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Bwodpfx Asz Eq Epol Aeu Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, feed length X-axis: 630 mm, feed length Y-axis: 730 mm, feed length Z-axis: 860 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, nominal power (apparent): 70 kVA, torque: 1,400 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 640 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 290 kg, total height: 3,650 mm, total length: 5,650 mm, total width: 3,560 mm, table width: 400 mm, table length: 400 mm, table load: 290 kg, rotational speed (max.): 80 rpm, overall weight: 25,000 kg, distance between spindles: 720 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, For sale is a high-performance, two-spindle CNC machining center, MAG SPECHT 500 DUO LIMO PW, manufactured in 2017, with a pallet changer, two working spindles, and 5-axis machining capabilities. The machine has been used infrequently recently and is currently not in active production. It remains connected to the power grid, so an inspection while powered on is possible by appointment. Manufacturer: MAG / FFG Model: MAG SPECHT 500 DUO LIMO PW Year of manufacture: 2017 Condition: very good (original images dated September 15, 2026) Operating hours: 17,690 h Category ID: 1458 Bodpfx Aljz Ar E Ie Aewu Type ID: 4166 Machine type: Universal machining center Technical data: Year of manufacture: 2017 Machine number: X.0112.6258 Control system: Siemens 840D SL Number of spindles: 2 Machining: 5-axis Design: LIMO PW Pallet changer Tool holder: HSK-A63 Travel in X: 630 mm Travel in Y: 730 mm Travel in Z: 860 mm Axis speed X/Y/Z: up to 120 m/min Spindle distance: 720 mm B-/A-axis: up to 80 rpm B-axis division: 360° x 0.001° Pallet size: 400 x 400 mm Table/pallet load: 2 x 290 kg Max. weight moment at 90°: 1,400 Nm Max. workpiece and fixture height with pallet changer: 640 mm Max. clearance circle workpiece/fixture: 2 x 700 mm Tool magazine: 112 tool positions for HSK-A63 Tool diameter with full load: 75 mm Tool diameter with empty spaces: 230 mm Max. tool length: 550 mm Max. tool weight: 12 kg Total weight of tools in the magazine: max. 420 kg Accuracy / Measuring system: Linear measuring system X/Y/Z: 0.0001 mm Positional accuracy: 0.005 mm Positional repeatability: 0.004 mm Machine dimensions: Width: approx. 3,560 mm Length: approx. 5,650 mm Height: approx. 3,650 mm Machine weight: approx. 22,000–25,000 kg Electrical rated power according to nameplate: 70 kVA Operating voltage: 400 V / 50 Hz If you have any questions or need more information, please send us a message or call us. Inspection while powered on is possible by appointment in 36199 Rotenburg an der Fulda. Technical documentation is available. Sale from the current location. Dismantling, loading, and transport can be arranged. Subject to prior sale, errors, and changes in technical specifications.

Condition: used, Year of construction: 2018, travel distance X-axis: 510 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 70 m/min, feed length X-axis: 510 mm, feed length Y-axis: 600 mm, feed length Z-axis: 700 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 70 m/min, nominal power (apparent): 63 kVA, torque: 900 Nm, workpiece height (max.): 490 mm, workpiece diameter (max.): 535 mm, workpiece weight (max.): 200 kg, total height: 3,470 mm, total length: 4,150 mm, total width: 3,120 mm, table load: 200 kg, rotary table diameter: 450 mm, rotational speed (max.): 80 rpm, overall weight: 18,000 kg, distance between spindles: 540 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this very well-maintained, twin-spindle, 5-axis machining center, MAG SPECHT 450 DUO, manufactured in 2018. Manufacturer: MAG / FFG Machine Type: SPECHT 450 DUO Year of Construction: 2018 Condition: very good Operating Hours: 15,908 hours Machine Number: X.0112.6552 Order Number: E.7500194.001 Wiring Diagram Number: E.7500194.001 Location: 36199 Rotenburg an der Fulda, Germany Inspection: possible under power The machine is designed as a highly productive, twin-spindle machining center for series production and features 5-axis machining, two working spindles, and HSK-A63 tool holders. Technical Data: Year of Construction: 2018 Machine Number: X.0112.6552 Number of Spindles: 2 Machining: 5-axis Tool Holder: HSK-A63 Travel X: 510 mm Travel Y: 600 mm Travel Z: 660 / 700 mm Axis Speed X/Y/Z: up to 70 m/min Spindle Distance: 540 mm B-/A-Axis: up to 80 rpm B-Axis Division: 360° x 0.001° Table Plate Diameter: 2 x 450 mm Table Load: 2 x 200 kg Max. Interference Diameter of Workpiece/Fixture: 2 x 535 mm Max. Workpiece and Fixture Height: 490 mm Max. Weight Moment at 90°: 900 Nm Bjdpfez Ar H Ssx Al Aewu Tool Magazine: 112 tool positions HSK 63 Tool Diameter with Full Load: 75 mm Tool Diameter with Empty Spaces: 140 mm Max. Tool Length: 550 mm with front loading Max. Tool Weight: 12 kg Total Weight of Tools in Magazine: max. 420 kg Accuracy / Measuring System: Path Measuring System X/Y/Z: 0.0001 mm Positional Accuracy: 0.005 mm Positional Repeatability: 0.004 mm Machine Dimensions: Width: approx. 3,120 mm Length: approx. 4,150 mm Height: approx. 3,470 mm Machine Weight: approx. 16,000–18,000 kg Electrical Rated Power according to Nameplate: 63 kVA Operating Voltage: 400 V / 50 Hz The machine can be inspected under power at the Rotenburg an der Fulda location by appointment. Technical documentation is available. Sale from location. Subject to prior sale and errors in the technical data.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 107731, Equipment: cooling unit, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Bedpfx Aljzzc U Ds Aowu Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2006, condition: used, 6 beer dispensing tanks, manufactured by DUOTank, each with a capacity of 10 hectoliters, 3 bar, but without documentation. Each set consists of 2 tanks stacked on top of each other in a frame. The tanks are insulated and equipped with pressure fittings and a yeast outlet. 1 spray head with a manhole cover for all tanks. Bwodpfezkah Hex Al Aeu Year of manufacture: 2006/2007.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Bodszwp Uiepfx Al Aswu Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Year of construction: 2013, condition: good (used), industrial machine, K. Schulten KS AluKap DUO, designed for the production of armored roller shutters. The machine was manufactured in 2013. It has two automatically fillable containers for armor plating. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap DUO - Year of manufacture: 2013 - Machine No.: K 0132 - Maximum armor width: 3500 mm Bwjdpfoz Dftlex Al Aou - Minimum armor width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 160 l/min - Pressure of the pneumatic system: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, good The machine is available for immediate pickup.

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system Bwodpfxoy Tuhie Al Asu - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 Bwodpfxjzvwl Ts Al Asu • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X 650 Y 400 Z 420 U/V +/- 101mm, Table 901 x 660mm, max load on table 1,200kg. Bwsdpfjzzmkisx Al Aju

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: Bwjdsycc N Sopfx Al Asu - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Bjdpfx Alez Az Iao Aswu Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Bwsdjzqdagopfx Al Aou Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 700 mm Travel distance Y :450 mm Travel distance Z: 420 mm max. workpiece size X: 910 mm max. workpiece size Y: 660 mm max. workpiece size Z: 400 mm max. workpiece weight: 1200 kg table size X: 650 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +101 generator: 30 Ampere submerged cooling unit CNC wire EDM machine 5 CNC axes: X / Y / Z / U / V Bwjdpoz Aq Dvsfx Al Aou Automatic wire threading Dual Water Jet with Annealer Automatic wire break recovery 15" TFT touchscreen Linear glass scales in X / Y Dielectric chiller Automatic temperature control Max. table load: 1,200 kg Max. machining current: 30 A Programmable wire tension: 2–30 N Standard wire spool: 16 kg Machine weight: approx. 6,000 kg