Used Karstens K11 for sale (149)

Condition: ready for operation (used), Fanuc A04B-0810-C367 / A04B-0810-D371 Heat exchanger with fan SN: MK116475,used, good condition, 100% functional, scope of supply according to photos Iijdpfxjmq H Ste Am Djh

Condition: ready for operation (used), Fanuc A04B-0810-C366 / A04B-0810-D372 Heat exchanger with fan SN: MK116474,used, good condition, 100% functional, scope of delivery according to photos Iisdpemq H Spsfx Am Doh

Condition: used, Three-phase motor, electric motor -Manufacturer: VEM, electric motor type K11R 160 L4 R -Power: 13.5 kW -Speed: 1470 rpm -Voltage: 380/420 V / 655/725 V -Shaft: Ø 42 x 110 mm -Protection class: IP54 Iijdjt Appwjpfx Am Djh -Number: 2x motor available -Price: per piece -Dimensions: 650/345/H415mm -Weight: 142 kg/pc.

Condition: new, SEW Eurodrive SA37/T DRS71S4/ASE1 / 01.7448093002.0002.17 Gear motor SN: MK117825 with 2nd type plate and accessories, unused, 100% functional, scope of delivery as per photos Iedpfx Aerhbc Nem Djih

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 80 kW * Hourly output up to 1,100 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Unladen weight approx. 280 kg Iiodet Hfyaopfx Am Deh ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 320, table load: 2,500 kg, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,250 mm Travel in Y-axis: 650 mm Travel in Z-axis: 750 mm Rapid traverse rate X-axis: 15 m/min Iiodpfxjy Sxmto Am Doh Rapid traverse rate Y-axis: 15 m/min Rapid traverse rate Z-axis: 15 m/min Table load: 2,500 kg Maximum spindle speed: 6,000 rpm Number of tool positions in tool magazine: 40 MACHINE DETAILS Control model: Heidenhain iTNC 320 EQUIPMENT Chip conveyor

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Manufacturer: Bilz, Thread cutting chuck, quick-change thread cutting chuck, 3 pieces -Type: WFLK 115 B TR 28X2 -Submission/Price: complete Iiedpsztwupsfx Am Dsh -Transport dimensions: 120/40/H135 mm -Weight: 1.9 kg

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h Iedshtryxopfx Am Doih -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-115 is the biggest model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-115 includes two stages of crushing process which is made by primary jaw crusher and secondary cone crusher. Ijdezvp Tcspfx Am Djih TECHNICAL SPECIFICATIONS: - Bunker: 35 m3 - Plant Dimensions (1st chassis): 13000x4700x4400 mm - Second chassis: 19620x4619x4364 mm - Production Capacity: 180-300 Tons Per Hour - 1st Crusher: Jaw Crusher – 1100x850 mm - 2nd Crusher: Cone Crusher – FABO CC 300 - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 2200x5000mm 3-4 decks - Total Motor Power: 450 Kw - Generator (optional): 600 kvA MCK-115 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Servo motor, geared motor, electric motor, micro geared motor, mini geared motor, DC motor with planetary gearbox -Manufacturer: Nucleus, servo motor with gearbox, micro geared motor -Type: unfortunately no exact type designation -Item No.: FUK1101 -Tension: -Shaft: Ø 20 mm / M8 -Number: 9x geared motors available Iijdpfxjxzzbpo Am Dsh -Price: per piece -Dimensions: Ø 40 x 170 mm -Weight: 0.5 kg/pc.

Condition: used, functionality: unexamined, Ferwood Code: RU0010420 - Manufacturer Code: BK1120 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a reconditioning service; please contact us. 0.5KG 20X20X20cm Ijdpfeyk Ekbex Am Dsih

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 1,188 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, suspension: parabolic leaf (spring), tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gearbox support leg at the front 2 support wedges with holder Underrun protection, steel Lockable storage compartment for ramps under the loading area Coupling device for center axle trailer Drawbar with tested 40 mm tow hitch Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (lever equalization) Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system, color-coded lines for easy servicing Hand-operated parking brake Integral air reservoir Without ABS, but with mechanical ALB, then max. 60 km/h approval 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Electrical System 12 Volt, multi-chamber lights, without yellow LED lighting on the sides, reflectors on the sides 2 white position lights at the front 2 white/red marker lights at the rear Ijdpfx Asi Rizbjm Djih 1 x 7-pole 12 Volt plug at the front, with connecting cable, extended by approx. 60 cm Hydraulics Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operation hydraulically via truck PTO Tipping Bridge Sturdy tipping bridge with 4 mm steel sheet floor, side wall construction steel, side walls continuous, foldable and suspended with central locking at the bottom. Rear uprights can be inserted. Rear wall foldable and suspended, with central locking at the bottom. Bed length approx. 4,500 mm, side walls with 5 hinges at the bottom. Bed width 2420 mm 5 pairs of lashing eyes in the floor, each 5 tons Operating Instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Approval Country / Signage Approval country: Germany With Dekra approval and certificate, for max. 60 km/h approval, towing vehicle LoF (approval country Switzerland max. 40 km/h possible) Prepared for single-row license plate holder Without contour marking / reflective stripes according to ECE R 048 Painting Frame hot-dip galvanized incl. passivation, 15-year warranty against rust Side walls / bridge RAL 3002 carmine red Note! If the bridge is galvanized, it will not be painted! Note! Bridge is only primed inside! Wide tires also possible at an extra cost. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive images!

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-110 is the biggest model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-110 includes two stages of crushing process which is made by primary jaw crusher and Secondary impact crusher. TECHNICAL SPECIFICATIONS: - Bunker: 35 m3 - Plant Dimensions (1st chassis): 13000x4700x4400 mm - Second chassis: 17500x47000x4600 mm - Production Capacity: 180-300 Tons Per Hour - 1st Crusher: Jaw Crusher – 1100x850 mm - 2nd Crusher: Secondary Impact Crusher – 1120x1500 mm - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 2200x5000mm 3-4 decks - Total Motor Power: 500 Kw - Generator (optional): 660 kvA MCK-110 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts Iodpfx Amezi T Udj Doih • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, Abrasive blasting cabinet DSK 1102 S with trolley and rotary table. Width: 1500mm, Depth: 1235mm, Height: 995mm Ijdpfx Aedhl Ngem Djih Lift-up door, pneumatic. If you have any questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contact persons.

Condition: ready for operation (used), Schunk Gemotec CLM 200-H100 compact slide SN: MK116609,used, normal traces of use, 100% functional, scope of delivery according to photos Iisdpfemz Ecwsx Am Djh

Condition: new, power: 132 kW (179.47 HP), Year of construction: 2026, MCK 110 Mobile Jaw Crusher system, it breaks, sifts and washes stones. This special design facility consists of two groups. The first group crushes the stones to the desired size with a mobile jaw crusher. Iisdpfjwfr N Usx Am Dsh The second group crushes them smaller. Also, the second group doing screening and washing stones. You can contact us for our customized solutions.

Condition: new, SEW 01.7448093002.0003.17 / SA37/T DRS71S4/ASE1 geared motor SN: MK117808, unused, 100% functional, scope of delivery as per photos Iiedpfxerhbczo Am Deh

Condition: new, SEW Eurodrive WA20 DRS71S4BE05 / 01.7478506201.0002.17 Gear motor SN: MK117824 with 2nd nameplate and accessories, unused, 100% functional, scope of delivery as per photos Iiodpfxjrhbc Tj Am Doh

Condition: new, SEW Eurodrive WF20 DRS71S4BE05HR/ASE1/TF/AS7Y / 01.6631334201.0001.19 Gear motor SN: MK117826,unused, 100% functional, scope of delivery as per photos Iedpfx Amjrhbdfo Deih

Condition: new, Siemens 6GK1143-0TA01 communication processor, E-Stand 2, unused, 100% functional Iiedpfx Ajxagt Ijm Doh

Condition: used, heavy gear, angular gear Iedpfsdkf Iqsx Am Doih -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Condition: used, Ferwood Code: RU0000643 - Manufacturer Code: 10.01.12.00369 - Condition: Used - Compatible Machine: HOMAG CNC - If interested we offer a revision service, contact us. Iiedpfxsu U A A He Am Dsh

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 627 mm, total length: 1,030 mm, total width: 349 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN A Ijdpfjy Rnlpox Am Djih + 1-year warranty + Including Aquamatik (central water filling system) + Including end discharge cable & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity report provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 835 mm Width: 413 mm Height: 784 mm Weight: approx. 760 kg Suitable for the following models and others: Linde E 18 Z - 322-00 Linde V MODULAR - 5213-00 Still EK 11 Jungheinrich EKS 210 Jungheinrich KMS 100 Toyota 6FBRE14 Paletrans PR17 Common battery sizes available, enquiries welcome. Transport available.

Condition: new, Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for the pallet racking crossbar: Racking system: Mecalux The scope of delivery includes: 01x Pallet racking crossbar, new Material color: RAL 2001 orange Suitable for frames: A103 Crossbar type: 2C-S 1115 Box profile: 110 x 50 mm Clip: G.E. - 3 Clear width: 2,700 mm Weight / piece: approx. 15.026 kg Max. load per crossbar pair: 3,000 kg, with evenly distributed load Iisdpfxoh Dv Uqj Am Djh 02x Integrated locking pins, new To secure the longitudinal supports against unintentional lifting out General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)