Used Kompressor / Compressor for sale (3,289)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press Ibjdpozu Aibsfx Afhob

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. Iedezudabopfx Afhobb • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Permissible maximum operating pressure: 10 bar Volume flow: 184.1 l/s or 11.05 m³/min Ibedpozvqp Ssfx Afhsb Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Equipped ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours The compressor is functional. It has no outstanding maintenance or repairs. The last maintenance, according to the manufacturer's specifications, was performed in 02/2026 at 70,500 operating hours. The compressor was overhauled in 2018 at 33,000 operating hours and received a new compressor element. Used machine, sold as is, without warranty.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 1,915 h, Kaeser M 51 compressor, manufactured in 2001, 1915 operating hours, 5 m³ volume flow, 4-cylinder Deutz diesel engine, 41 kW, 7 bar pressure, serial number TP1229008901, truck coupling, no lighting. Ibsdpfjzbihrox Afhob

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider screw compressor 4152009631 Ibjdpfxeziukye Afhob - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control The machine was purchased as a replacement unit in 2020 and is new and has not been used to date. The machine has never been used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Robust compressors for professional use with V-belt drive and a high-performance 2-cylinder unit made of cast iron. The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality Ibjdpfx Afevl Euxshob of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with a parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, standard equipment includes a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 500 l/min, delivery capacity 375 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, motor power 3 kW / 400 V Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 4-51 1992 Characteristics: Capacity 8.60 bar Power 250 kW Voltage 500 V Ibedpjvyrnzefx Afhsb Running hours at last maintenance: 57957

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 840 m³/h, pressure (max.): 7.5 bar, type of cooling: water, Oil-free screw compressor, Atlas Copco ZR90 90 kW Ijdpfx Afszqvvashjbb 7.50 bar 14 m3/min Year of manufacture: 2012 Operating hours: 5735

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Ibjdpfx Afjzzp N Iehob Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter Ibsdpfx Afew Rcgtehjb CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, Ibodpfx Afszxpi Nsheb separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 402866, power: 37 kW (50.31 HP), volume flow: 385.8 m³/h, pressure (min.): 10 bar, It is fully functional since bought very few usage. Ibedszvh Edopfx Afhjb

Condition: used, Year of construction: 2006, Kombi-Falzmaschine - Combination Folder Heidelberg-Stahlfolder KH78-4KTLL Year 2006 - Serial-No. 0-00256 Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 780 x 1280mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SAK-94.H Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Ibsdpfxep Symgj Afhob Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Ijdpfxeyzhmbo Afhobb Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.

Condition: excellent (used), Year of construction: 2009, PROD. KAESER TYPE ASD47 S/N 1150 YEAR 2009 POWER (kW) 25 CAPACITY (m3/min) 1.07-5.27 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 67466/78928 FREQUENCY CONVERTER yes Ijdpfx Aez Dg Hajfhobb BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: used, Year of construction: 2022, operating hours: 416 h, Quick-change system = More information = Ibodpfezz U N Hox Afhob Intended use: Construction For more information, please contact Tobias Ebert.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Ijdpfx Asyy U Shjfhebb Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 2006, S015361 Iodpfoz Dgvuex Afhebb MANUFACTURER: KAESER TYPE: SK24 SERIAL NUMBER: 1353 YEAR: 2006 POWER (kW): 15 CAPACITY (m3/min): 2.02 PRESSURE (bar): 8 HOURS (RUNNING/TOTAL): 42413 FREQUENCY CONVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLED BY (AIR/WATER): air ON-BOARD TANK: no DOCUMENTS: no CONNECTION: 1" NEW/USED: USED

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage, compression-enhancing, mobile piston compressor The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, comes standard with a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 674 l/min, delivery capacity 505 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V Ex works, from the Seevetal location, without transport, as inspected, Iodpfovl Ev Aex Afhebb subject to prior sale.

Condition: good (used), Year of construction: 1995, Gebr. Kaeser screw compressor SK 19 Motor power: 11 kW Year of manufacture: 1995 Permissible operating overpressure: 10 bar Air delivery rate: 1900 liters/min with Kaeser control relay Dimensions approx. L 785 x W 820 x H 1017 mm (dimensions without connections). Weight: 270 kg Ijdpfezrhrvex Afhjbb Location: available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Type: S220 Operating hours: 54,947 h Ibjdpfx Afjw Rd Avohob Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.

Condition: like new (used), Year of construction: 1998, operating hours: 13,929 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.254 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: air, screw compressor TAMROTOR 110kW 7,5 bar 20,9m3/min Manufacturer: Garden Denver TAMROTOR Ibodpfx Aoty Nkwjfhob Type: M110/7.5 EANA Air delivery: 20.9m3/min Year of manufacture: 1998 operating pressure: 7.5 bar Engine power: 110 kW Revolution: 3453/min Network: 50 Hz 400 V Maximum operating temperature: 115°C Weight: approx. 2400 kg

Condition: used, Year of construction: 2011, Colour: Blue Empty weight: 1.800 kg Dimensions (LxBxH): 235 x 124 x 199 cm - Details: - └ Description: 48,000 operating hours Ibjdpfxjyvr E Ds Afhob - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: CD10007783001 - Transport dimensions: 2350mm x 1240mm x 1990mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Ibedpfxexbdpps Afhsb

Condition: used, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 405 kg, fuel type: electric, Year of construction: 2011, operating hours: 7,105 h, total length: 1,130 mm, total width: 780 mm, total height: 1,255 mm, operating pressure: 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, pressure (min.): 7 bar, pressure (max.): 8 bar, space requirement height: 1,255 mm, space requirement length: 1,130 mm, space requirement width: 780 mm, volume flow: 3.15 m³/h, machine/vehicle number: 1223, motor manufacturer: Kaeser, Equipment: documentation/manual, type plate available, For sale is a reliable and powerful Kaeser ASK 32 screw compressor with Sigma Control, manufactured in 2011. The machine is in good used condition and has been serviced regularly. Ideal for workshops, trades, or industrial use. Technical data: Manufacturer: Kaeser Model: ASK 32 Sigma Control Isdoy Rrqcspfx Afhebb Year of manufacture: 2011 Screw compressor Control system: Sigma Control High performance and energy efficient Immediately ready for operation The compressor is running and can be inspected and tested by appointment.