Used Lecitrailer Bache+Chariot Embarquer/Kooiaap for sale (139)

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Gedpsh Uqpvofx Adcebp Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Gsdshzbipspfx Adcjbp Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2005, Basic data: Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000kg Gbedpfx Ajrfn Rvedcop Operating voltage: 400/415V 50Hz Power consumption: 20kW Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Condition: refurbished (used), TECHNICAL DESCRIPTION KKS 450 KKS 450 Semi-automatic, hydraulic universal circular saw with rotary table for mitre cuts SAW BLADE Segmented saw blade Blade mount according to DIN 8576 ☐ 400 x 4 ☒ 450 x 4 mm 50/4 x 14/80 mm WORKING RANGE Round material 90°/45°: 125 / 150 mm Square material 90°: 115 / 140 mm 45°: 110 / 130 mm Flat material 90°: 305 x 40 / 330 x 40 mm 45°: 235 x 30 / 250 x 40 mm U-profiles upright 90°/45°: 120 x 55 / 140 x 60 mm U-profiles horizontal 90°: 240 x 85 / 280 x 95 mm 45°: 180 x 70 / 220 x 80 mm Cut lengths from 10 mm DRIVE POWER Saw motor: 1.8 / 2.7 kW Hydraulics: 1.5 kW Coolant pump: 0.1 kW CUTTING SPEEDS (Standard) 11.5 / 23, 13 / 26 m/min or 10 / 20, 11 / 22 m/min or 13 / 26, 15 / 30 m/min SAW BLADE FEED Continuously adjustable as per table: 0 - 1,000 mm/min Blade rapid return: 3,300 mm/min ELECTRICAL CONNECTION TN-S system – 3 phases, neutral, earth Gbsdpfx Aox N Ncaodcep 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 960816, Used WAB Dyno-Mill model KD 6 (6) stainless steel horizontal bead mill. Stainless steel jacketed milling chamer has capacity approx. 6 litre and it rated max product pressure 2 bar at max temperature 80°C. Jacket rated max pressure 8 bar, min cooling water temperature -20°C. Shaft is equipped with (6) polyurethane griding discs and belt driven by EExe eII T3 el. motor 10 kW, 1465 rpm, 50 Hz. Agitator disc circumferential speed 10 m/s. Shaft sealed with double mechanical seal. Gap type of milling beads separation mechanism. Includes integrated contol panel and switchboard, carbon steel frame. Gbodpfx Aeun S S Eodcep

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Fuel feed Heat exchanger from 2009 Gsdpfxsx Daw Uj Adcsbp Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: good (used), mileage: 826,410 km, power: 330 kW (448.67 HP), first registration: 07/2017, axle configuration: 6x2, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Year of construction: 2017, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, - Aluminum fuel tank - Roof spoiler - EPS - Low noise - Intarder - Particle filter - Radio/CD player - Sunroof - Sleeper cab - Side door - Seat heating - Toolbox Front axle: Steered; Suspension: Leaf spring suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steered; Suspension: Air suspension Unladen weight: 11,965 kg Payload: 14,035 kg Permissible total weight: 26,000 kg Technical condition: good Optical condition: good Vehicle number: 129 Complete train, truck with trailer Mercedes Benz Actros 2545 / 6x2 / Retarder / Euro 6 / Complete train .: WDB96302010162491 Suspension: Leaf spring / Air Transmission: Automatic Air conditioning Retarder Engine brake Gsdpfxszivh Ho Adcsbp Cruise control Auxiliary heater Steering + lift axle Emission standard EURO 6 Truck Internal dimensions Length: 7.30m Width: 2.47m Height: 3.00m Trailer: Brand: Lecitraile TYPE: RC2EDPSP0AC VIN: VV1C2XD4USN128142 First registration: 19.09.2007 Unladen weight: 5,100 KG Gross vehicle weight: 18,000KG Trailer internal dimensions: Length: 8.15m Width: 2.47m Height: 3.10m Special equipment: Trailer socket 15-pin 7+7-pin, Audio system: CD radio (Bluetooth), Exhaust pipe downwards to the right, Air horn, Cab: Width 2.50 m, Fire extinguisher, Windshield tinted, Info display 10.4 cm, Fuel tank: 500 L aluminum, Fuel tank: Additional tank 500 L aluminum, right, Unregulated power steering pump, Integrated air intake, Roof deflector (lockable, without base cover), Reinforced engine brake, Tag axle steered, liftable, PremiumComfort mattress bottom, Spare wheel, Retarder, Fleet management system interface, Drawers under the dashboard, Seats in the cab: Driver's seat comfort suspension seat, Sun visor outside, Steel rims 9.00x22.5, Storage compartment left under the cab, 24V socket in the passenger footwell additionally Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Front axle load 7.5 t, Actros 4, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pin, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Steel air tank, Air compressor medium, Cab: L StreamSpace, Cab: steel sprung, Comfort, Suspension: Leaf spring / Air, Suspension: Front springs 7.5 t, 2 leaves, Power windows, Generator 100 A, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle bevel gear 440, Body/superstructure: Chassis, Comfort bunk below, Comfort central locking system, Communication interface, Radiator grille, 2-stage air compressor, Engine 12.8 L - 330 kW R6 Diesel (OM 471), Engine compartment encapsulation, Tag axle single-tired, Ramp mirrors, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Co-driver's functional seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Stabilizer additionally, Rear axle / Tag axle, Storage flap outside left, Socket cab 24V, Tachograph / EC control unit, Door extension for the cab, Underride protection aerodynamically shaped, Underride protection front, Preparation CB radio, Preparation toll collection, Front axle cambered, Regulated water pump, Permissible gross weight 25.00 t, Auxiliary heater (water) No liability...

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Gjdpfszizkyjx Adcebp Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2006, CNC gantry flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Gsdpfx Adjw El Udocobp Work table: 1.5 x 6 m 2 oxy-fuel torches 2726 hours

Condition: excellent (used), -Dimensions: 1440x2700x2600mm -Chariot 600x800 -N°série:9300041424 -Modèle:E8.64 -Année:06/2016 Gbodpfx Adowxmfwjcsp -Surface au sol: 2,71 m2 -Température max: 280°C -Passage de porte: 830 mm -Puissance de chauffe: 57kW -Tension:400V

Condition: used, mileage: 596,000 km, power: 355 kW (482.67 HP), first registration: 06/2020, fuel type: diesel, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, DAF XF 480 Flatbed Curtain Sider, Retarder, Stationary Air Conditioning, Euro 6 Reference for inquiries: 0426328 * Condition: very good * Power: 355 kW / 480 HP * Engine capacity: 12,902 cm³ * Permissible total weight: 18,000 kg * Unladen weight: 10,768 kg * AdBlue * Retarder * ABS * EBS * Rear axle differential lock * Adaptive cruise control with emergency brake assist * Lane departure warning * Air-suspended comfort driver’s seat * Driver's seat heating * Cab: Super Space Cab * Suspension: leaf/air * Electric windows (driver/passenger) * Electrically adjustable and heated mirrors * On-board computer * Multifunction steering wheel * Stationary air conditioning * Automatic climate control * Auxiliary heater * CD radio / AUX / USB * Navigation system * 2x bunk beds * Pull-out fridge below bunk * Mechanically extendable sunshade roller * Mechanically extendable sunshade driver's door * Transparent sun visor * Fog lights * Skylights * XL tank, left side * Storage box, right side (plastic) Body: Flatbed curtain sider * Edscha sliding roof system Dimensions (cargo area/load platform): Cargo length: 7,300 mm Cargo width: 2,480 mm Cargo height: 2,800 mm Tyres: * 1st axle: 355/55 R 22.5, leaf spring suspension, 25% tread remaining * 2nd axle: 315/70 R 22.5, air suspension, 25% tread remaining Trailer: Lecitrailer Reference for inquiries: 0426329 * Condition: very good * First registration: 06/2020 * Permissible total weight: 18,000 kg * Unladen weight: 10,768 kg * ABS * Edscha sliding roof system * SAF axles * 3-axle air suspension Dimensions (cargo area/load platform): Cargo length: 8,100 mm Gedpfx Adsy A Ugkscebp Cargo width: 2,490 mm Cargo height: 2,900 mm Tyres: * 1st axle: 445/45 R 19.5, air suspension, 25% tread remaining * 2nd axle: 445/45 R 19.5, air suspension, 25% tread remaining * 3rd axle: 445/45 R 19.5, air suspension, 25% tread remaining Price: €39,900 + 19% VAT For further information, you can reach us at the following numbers: We speak: German, English, French, and ???? Errors, omissions, and prior sale excepted.

Condition: used, maximum load weight: 29,441 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2024, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Fifth wheel height 1120 * Side loading height with lifting roof and interior height 2750 2655 mm * Side loading height without lifting roof and interior height 2750 2610 mm * Total length 13830 mm * Platform interior length 13620 mm * Total width 2550 mm * Platform interior width 2480 mm * Interior width between stanchions 2480 mm * Interior width between longitudinal members (without lifting roof) 2480 mm * Interior width between longitudinal members (with lifting roof) 2430 mm * Neck height 105 mm * Axle spacing 1310 mm * Axle spacing kingpin 1st axle 6390 mm * Technically permissible total weight 42000 kg * Technically permissible axle load 9000 kg * Technically permissible fifth wheel load 15000 kg * External height 3975 mm * Empty weight 6559 kg * Railway code certificate P386 Chassis Steel lamp holder 19 pairs of lashing rings Floor made of screen-printed plate 30 mm Load capacity 7.5 tonnes + steel checker plate at the rear approx. 270 mm deep Rollers Ram buffer at the rear (WIELTON) Pallet stop with lashing holes Steel rear underrun protection Composite - side impact protection Liftable rear underrun protection Axles and suspension Number of axles 3 Rigid axles SAF disc axles 3x9000 kg 22.5 INTRADISC KNORR clamps Brake discs diameter 430 mm Fifth wheel height 1120 Hubodometer Gbodpfx Aervu Nzjdcop Support legs SAF Hercules 2-speed gearbox supports, full load Rims 6x steel rims 22.5-11.75 ET-120 Protective caps for wheel nuts Tires 6x tires 385-65-22.5 Other chassis equipment TIR sign, foldable Tensioning belt with ratchet 7 tons - 8 pieces Fire extinguisher 6 kg Ship fastening straps 4 pairs Two wedges with fastening A-sign, foldable ADR sign, foldable Fire extinguisher box on the front wall Tool box - 165L Railway coding number P 386 F1 Side loading height i.L.: 2,530 mm F2 Internal height i.L. under roof: 2,575 mm Construction Lifting roof (0, +50) Top slats - 7 rows Side tarpaulins with eyelets (at least 24 tarpaulin tensioners) Tarpaulin tensioning device at the front secured with a flap and customs rope (TIR version) Tarpaulin tensioning device at the rear Tarpaulin tensioner with additional lock Customs version on the outer frame with safety lock Sliding roof on one side from back to front EDSCHA HYBRID (TIR version) Aluminum bulkhead with customs eyelets Rear wall as aluminum double-wing door Screen-printed plate 6 mm H=1500 mm 2x transparent tarpaulin pockets for ADR labels Painting of other equipment 2-sided painting (powder coating) bulkhead, doors, corner stanchions Additional painting - color RAL5002 (ultramarine blue) Electrics 2x7-pin + 1x15 pole with EBS connection, without connecting cables to the tractor unit Lighting Hella LED EASYCONN version Rail / Intermodal equipment consisting of Axles with extended air bellows and adaptation of piggyback frame with gripper edges in accordance with Bach specifications Railway coding number P 386 Roller ram buffers at the rear, right and left RoRo Ferry Lashings Intermodal 5-fold ILU code, attached to the tarpaulins on the left and right, on the front wall, on the rear wall and on the roof Positions marked in yellow on the side in the area of the gripper edges (Rail) Side tarpaulins with 24 tarpaulin tensioners in accordance with railway specifications (Complies with the DAIMLER load securing guideline DL 9.5) Roof tarpaulin in accordance with railway specifications All information without guarantee. Errors subject to change. Subject to prior sale.

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine No. 14 561-06, Year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Gbodpsf Ncadofx Adcsp Track gauge: 3345 mm Track height: 650 mm 2x machine cutting torches with cutting table

Condition: good (used), Year of construction: 2010, Offer 25375 Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm Godpfx Adexnivzocsbp - Controller: BACH - Track gauge: approx. 1900 mm - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 - Weight: approx. 4 t - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m