Used Lvd Phoenix for sale (220)

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Gusdezzknxspfx An Isg Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: like new (used), Year of construction: 2022, Helium leak detector Manufacturer: Leybold Type: Phoenix Quadro EU Gedpet Urlrofx An Ioug Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.)

Condition: used, Year of construction: 1982, machine/vehicle number: 10628, sheet width:3000 mm plate thickness:4 mm distance between columns:3300 mm rear stop:700 mm strokes per minute:19 - 50 Stk/min Gujdecxxzlspfx An Isg engine output:7,5 kW total power requirement:ca.10 kW weight of the machine ca.:ca.5 t dimensions of the machine ca.:3,7 x 1,5 x 1,9 m

Condition: used, Interface converter, converter, module converter, FL Comserver, DC/DC converter -Manufacturer:Phoenix Contact, DC/DC converter Guodpfx Aouxg I Dsn Iog -Type: 3112.3 -Number: 3x converters available -Price: per piece -Dimensions: 85/25/H80 mm -Weight: 0.1 kg/piece

Condition: new, Phoenix Contact FL SWITCH LM 4TX/2FX Industrial Ethernet Switch SN:2002362387, unused in opened original packaging, 100% functional, delivery scope as shown in photos. Gusdpfsx Dw R Esx An Isg

Condition: used, Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact power supply Quint Power -Type: Quint-PS-3x400-500AC/24DC/10 Gedpfx Anjnbhlue Ieug -Order No.: 2938617 -Dimension: 130/85/H130 mm -Weight: 1.1 kg

Condition: used, functionality: fully functional, overall weight: 1,000 kg, A machine designed to automate the gluing of display units, display stands, crowners and pall boxes. Its strength lies in its versatility. Easy to programme, it will fit into any gluing department seamlessly, causing minimal disruption to the department. Guedpjr Hqgxofx An Iog

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A Guedpfx Aoxaqa Son Isg C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch -Manufacturer: Phoenix Contact, FL Switch Industrial Ethernet Switch -Type: SFN 5TX -Order No.: 2891152 Gedpomdyfzofx An Ioug -Voltage: 24VDC -Dimensions: 130/75/H30 mm -Weight: 0.3 kg

Condition: used, 1 item = 720 kg of BÖHLER-THYSSEN stick electrodes Welding electrodes for electric arc welding Stored dry, in 6 kg packages Type Phoenix SH Yellow B + Phoenix Special Yellow AWS A5.1-91 Item No. 18952 Electrode diameter: Ø 5 mm Electrode length: 450 mm Gsdoxcnktepfx An Isug DIN: EN 499-E38 2 RB 12 - Rutile-based stick electrode. - Easy welding in root, fill, and cover passes - Excellent welding in all positions - Suitable for X-ray quality welding in pipeline, boiler, and tank construction - Can be used on factory-coated sheets - In unopened original packaging, stock item Total weight: 720 kg The scope of delivery is: 30 packages of stick electrodes, each containing 24 kg are available 1 package = 24 kg of stick electrodes, welding electrode for electric arc welding = 4 packages of stick electrodes, each containing 6 kg 720 kg = 120 packages, each containing 6 kg = 30 packages, each containing 24 kg

Condition: good (used), Power supply, power converter, power supply unit, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 .: 2903151 Gjdpfx Anext E Sve Ijug -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: Guedezxgtfopfx An Ieg 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Gjdpfxjruakgo An Ioug Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Gsdpfszvq Rcsx An Ioug Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: ready for operation (used), A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible. Gusdpju Iztmofx An Isg

Condition: excellent (used), Interface converter, converter module, FL Comserver, interface converter, interface converter, interface converter Gsdpfx Aoldk H Ujn Isug -Manufacturer: Phoenix Contact, Interface converter, original packaging -Type: PSM-EG-RS232/TTY-P/2K Ord.-No. 27 61 253 -Quantity: 1x Converter available -Cardboard dimensions: 120/90/H70 mm -Weight: 0.3 kg

Condition: used, Year of construction: 2008, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm Gedpfxsvxwmto An Ioug spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, DIN rail power supply Order No.: 29 38 74 3 -Type: MINI-PS-100-240AC/2X15DC/1 Gjdpfxefg E E Ss An Isug -Price: per piece -Number: 14 pieces -Dimensions: 100/45/H110 mm -Weight: 0.3 kg

Condition: used, mileage: 171,050 km, power: 120 kW (163.15 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,946 mm, total width: 2,035 mm, total height: 2,455 mm, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 3350 ----Why autonext? Over 400 cars & commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options possible. Complete vehicle selection at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear picture now: See the vehicle completely from the outside and inside via the YouTube link: Good and well-maintained condition. 1st owner, German vehicle, non-smoker vehicle. Complete service history, only serviced at Mercedes Benz. Gusdpfx Ajzaqwlon Isg Like-new all-weather tires on the front. Body: Maxi (wheelbase 4325 mm) Hydraulic loading platform "Bär" Rear view camera Integrated Phoenix safe with numeric code in the driver's cab Regulated air conditioning (Tempmatik) Bumpers and radiator grille frame in vehicle color Comfort driver's seat Roof spoiler Loading area length: 4.20m Loading area height: 2.10m Loading area width: 2.10m ---- Special equipment: * Multimedia system MBUX (touchscreen 7") * Bluetooth hands-free system * Steering wheel with multifunction buttons * 2nd battery (auxiliary battery) interior * Extended exterior mirror base left/right * Passenger-optimized center console (without storage compartment in the center console on the right) * DAB tuner (digital radio reception) * Chassis: Stabilization level II * Generator 250 A * Folding cover for storage compartment * Regulated air conditioning (Tempmatik) * Chrome radiator grille * Radiator grille frame in vehicle color * Smoker's package * Seats in the driver's cab: passenger double seat * Seats in the driver's cab: comfort driver's seat * Red fuel filler cap * Additional battery relay * Rear wall cladding Standard equipment: Storage compartment above the windshield, storage compartment below the dashboard on the passenger side, towing eye at the rear, adaptive brake light, airbag driver side, Anti-lock Braking System (ABS), Anti-slip regulation (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, brake assist, headliner in the driver's cab, automatic activation for driving lights, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: side wind assist, power windows electric 2-fold, transmission 6-speed - TSG (Eco Gear), body/structure: standard platform, keyless start, communication module (LTE) for digital services, fuel tank: main tank 71 L, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck approval, marker lights on the side, Mercedes-Benz emergency call system, engine 2.1 L - 120 kW CDI CAT, particulate filter, wheelbase 4325 mm, low pollutant emissions according to exhaust standard Euro 6, safety belt system with warning system (driver side), seat cover / upholstery: fabric, seats in the driver's cab: driver's seat with armrest, start/stop system, daytime running lights, fleece battery 92 Ah, service interval display Assyst, immobilizer, heat-insulating glazing, central locking with remote control, permissible total weight 3.50 t. ----MOT/emissions test can be done upon request. ----Warranty & "TÜV Profi Check" are of course available from us! We will also gladly accept your vehicle in trade! We will also create an individual financing or leasing offer for you! Without down payment,

Condition: refurbished (used), Year of construction: 2000, AGFA Phoenix 2250 with Online Developer in great condition. Resolution: 1200, 1800, 2400 and 3000 dpi - max. image area: 570 × 736 mm - including Techkon Densitometer for film. Guodpfx Anjfl Sxqo Ieg Refurbished 2024 in Germany.

Year of construction: 2019, condition: new, We offer bending tools and punching tools for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, and HACO machines. Guedpfsd H T Tfsx An Ijg Standard and custom tools. Please send us your requirements, and we will provide you with the appropriate tool.

Condition: good (used), PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available Gujdefg E E Iopfx An Ieg -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg

Condition: used, Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay Guodotvhtdopfx An Isg -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece

Condition: new, Phoenix Contact FL SWITCH LM 4TX/2FX SN:2002362451 ,unused, 100% functional, scope of delivery according to photos Gujdopf Arqepfx An Ijg

Condition: good (used), PTC relays, contactors, semiconductor contactors, relays, fiber optic converters Guodpfx Anof Rum Ne Ieg -Manufacturer: Phoenix Contact, DIN rail power supply, Order No.: 29 38 73 0 -Type. MINI PS 100-240 AC/24 DC/2 -Price: per piece -Quantity: 3 pieces -Dimensions: 100/45/H110 mm -Weight: 0.3 kg