Used Maka Pe 70 for sale (19,692)

Condition: used, Gear motor, electric motor, electric gear motor, gear motor Movigear classic -Manufacturer: SEW-Eurodrive, gear motor Movigear classic Crjdjra Rn Ejpfx Ab Deg -Type: MGFAT2-DSM/WA/PE -Speed: 3.6...36.2 rpm i= 55.25 -Connection voltage: 400 V -Torque class: 200 Nm -Hollow shaft: Ø 30 x 90 mm -Protection class: IP66 -Dimensions: 250/150/H300 mm -Weight: 14kg

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Cjdpfx Asua Tbwjb Dorg Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), Motor 1.5 kW 2 presses Depth of opening 13 cm Width of opening 20 cm Height of opening 15 cm Cjdpfx Abst D Evpj Dsrg

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Nord, spur gear motor with brake -Type SK 32-112 M/4 BRE60 i= 20.70 -Speed: 70 rpm -Engine: Type SK 112M/4 BRE60 -Power: 4.0 kW / 1445 rpm Codpfjt E D E Ejx Ab Dorg -Voltage: 400/690 VDY -Shaft: Ø 40 x 80 mm -Brake: 60 Nm -Dimensions: 745/260/H280mm -Weight: 76 kg

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph Crodpfxot Hwfns Ab Djg - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: good (used), scrubber-dryer, floor cleaning machine, mop, gearbox -Manufacturer: Gansow, gearbox from scrubber-dryer 70 BF 70 Cjdpfx Abekx Srio Djrg .: 40S 11 001 -Bolt circle: Ø 90 mm -Translation: i= 8:1 -Number: 2x gearboxes available -Price: per piece -Dimensions: 270/125/H125 mm -Weight: 4.7 kg/pc.

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N Codpfx Ajg Uk Eisb Dorg 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg Csdpfx Ashfufgjb Dorg

Condition: used, mileage: 318,000 km, power: 272 kW (369.82 HP), first registration: 05/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Scania P370 with automatic transmission, lift/steerable axle, air suspension, 50% tire tread, Palfinger T20 hooklift body, Palfinger Epsilon M120Z95TR crane with radio remote control and scrap grab, rear axle differential lock, reversing camera, jaw-type trailer coupling. Sale on behalf of customer. Csdowzd Saepfx Ab Derg All information subject to change; errors excepted.

Condition: used, mileage: 351,135 km, power: 345 kW (469.07 HP), first registration: 03/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, * Sun visor * ABS * TCS Traction Control System * ESP * Active Brake Assist * Lane departure warning * Radio * On-board computer * Rear view camera * Auxiliary air conditioning * Auxiliary heating * Cruise control * Hill start assist * Electric windows * Electric adjustable mirrors * Heated mirrors * Central locking * Fog lights * Electric pop-up roof * Driver's comfort seat * Heated seats * Cool box * Diff. lock rear axle * Lift/steering axle * Orange rotating beacon * Top air intake * Air dryer * Trailer hitch * Duomatic air connection * 12-speed * Suspension: leaf-air * Payload: 13760 * Continuous brake: automatic. controlled additional brake (VEB) 3-stage + auto mode ----Construction: Meiller roll-off tipper RK 20.70 for 5.5-7.4 mtr containers/total container length, 20,000 kg lifting capacity, radio remote control, push arm, hydraulic + manual container locking, hydraulically extendable underrun protection at the rear.----German vehicle in original condition, technically and visually a very nice truck ready for immediate use. Credpew Unnwjfx Ab Djg For sale only to traders. FOR EXPORTS ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders, sales talks are our general terms and conditions (see imprint).

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second Cedpsw Sgnkjfx Ab Djrg - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: good (used), Fan, blower, radial fan Codjupphmspfx Ab Dsrg -Manufacturer: AMA, fan, radial fan -Type: Motor 25105109 -Power: 0.6 kW / 2800 rpm -Voltage: 220/380 V -Fan wheel: Ø 225 x 70 mm -Dimensions: Ø 300 x 370 mm -Weight: 13.2 kg

Condition: used, Centrifugal pump, water pump, block pump, spiral casing pump -Manufacturer: Ebara, centrifugal pump type 2CDX/A 70/12 Crjdpfx Aboux Sbcj Dsg -Flow rate: 20-80 l/min -Engine power: 0.9 kW -Speed: 2800 rpm -Pipe connection see photos -Dimensions: 385/210/H250 mm -Weight: 13.4 kg

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Year of construction: 2002 Condition: very good Hablamos español Nous parlons français We speak English Csdeu D Udwopfx Ab Derg

Condition: good (used), Flat belt pulley, belt pulley, drive pulley, roller pulley -Pulley: Flat belt pulleys 7 pieces -Width 70 mm -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete Crjdpfxowuzk He Ab Deg -Dimensions box: 430/210/H115 mm -Weight: 11 kg

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Crsdpfxewuz Rao Ab Deg -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 215/70/H105 mm -Weight: 5,1 kg

Condition: excellent (used), Viessmann Vitoplex 270kw low-temperature boiler Crjdpfx Abswiqlce Deg

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: Crodpfx Asvyaxujb Deg 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: used, mileage: 371,000 km, power: 353 kW (479.95 HP), first registration: 09/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 5,700 mm, loading space width: 2,500 mm, loading space height: 800 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, MAN TGS 33.480 / 6x4 KIPPER 5,70 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 371 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AUTOMATIC AIRCONDITION PLATFORM: 570 x 250 x 80 cm (L x W x H) CAPACITY: 11 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 420/139 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: PALFINGER PK 23002 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 30166 Codpev D Ap Dsfx Ab Derg

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Csdpsvwfz Njfx Ab Dsrg

Condition: used, Year of construction: 1992, with Centrofix - cutterhead variable feed speed 2 x outfeed rollers Cleaned, lubricated, partially overhauled Fully set up, test planed, New parts: digital display, distance rings, infeed mat, connection box Used, good condition, top features Manufacturer: Maka Model: DH 630 A Year of construction: 1992 Machine no.: 9201891 GS-certified for wood dust Motor: 6.7 kW Codjxuv N Ispfx Ab Dsrg Planing width: approx. 630 mm Planing height: approx. 300 mm Table roller: 1 pc, adjustable Segmented pressure beam Segmented infeed roller 2 steel outfeed rollers Feed rate: 0-21 m/min, stepless Number of knives: 4 Knife system: Centro-Fix reversible knives Digital height display Electrical height adjustment with handwheel for fine-tuning Extraction port D 150 mm Space required: approx. 1200 x 1200 x 1400 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, ex stock, unpacked Transfer as is, as inspected, without warranty or guarantee

Condition: used, mileage: 416,000 km, power: 272 kW (369.82 HP), first registration: 03/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: orange, gearing type: mechanical, loading space length: 5,800 mm, loading space width: 2,350 mm, loading space height: 900 mm, Year of construction: 2008, Equipment: ABS, air conditioning, Renault Kerax 370 DXI Tipper 5,80 m + BORDMATIC / 8x4 Imported / Accident-FREE Cedpfx Ajv Hlakob Djrg IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 416 000 km EQUIPMENT: ? ABS ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AIRCONDITION TIPPER: 580 x 235 x 90 cm (L x W x H) CAPACITY: 16 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 210/230/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. Cjdpjv S Dn Dsfx Ab Djrg 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: used, mileage: 386,000 km, power: 272 kW (369.82 HP), first registration: 05/2016, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: red, gearing type: mechanical, loading space length: 6,400 mm, loading space width: 2,400 mm, loading space height: 900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, Volvo FM 370 / 8x4 Tipper 6,40 m + BORDMATIC Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2016 ? MILAGE: 386 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION TIPPER: 640 x 240 x 90 cm (L x W x H) CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg TIRE SIZE: 315/80R22,5 Cedpfxsy Eu N Dj Ab Dsrg WHEELBASE: 200/310/135 cm SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 27451

Condition: used, Year of construction: 2018, operating hours: 24,849 h, lifting height: 4,610 mm, free lift: 1,560 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,100 mm, total height: 2,200 mm, total length: 3,700 mm, total width: 1,180 mm, color: grey, Lifting capacity: 3.000 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 517387J00054 - Operating hours: 24849 - Lifting capacity: 3000kg - Lifting height: 4610mm - Overhead clearance: 2180mm - Free lift: 1560mm - Fork length: 1190mm - Maximum fork width: 1100mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Heating, Full cabin, Free-lift - Mast: Triplex - Inspection valid until: 12-2026 - Drive: LPG - Motor brand: Izusu - Transport dimensions: 3705mm x 1180mm x 2200mm (l x w x h) Crjdpfx Ajywt N Hsb Dog - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent