Used Mazak Optiplex Neo for sale (507)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Gijdpfx Asy T Hbzjnlow Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 475 mm, turning length: 1,000 mm, turning diameter: 475 mm, spindle bore: 72 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 1,033 mm, total height: 2,150 mm, total length: 4,950 mm, total width: 2,100 mm, turning diameter over bed slide: 475 mm, overall weight: 7,400 kg, bar passage: 72 mm, chuck outer diameter: 300 mm, We are offering this very well-maintained Mazak Quick Turn 40 CNC turning and milling center, manufactured in 2005. Godpfxsza Hxle Anleiw First owner. Used only for single-piece production. DIN ISO programming possible. 1 chip conveyor. The machine still turns with an accuracy of 0.01 mm. Various end stops. Traveling center. 1 tool cabinet. Various clamping jaws. Tool holders. Sleeves. Tools. Various traveling center cones. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 185273, turning diameter: 610 mm, spindle motor power: 26,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 88 mm, travel distance X-axis: 740 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 1,838 mm, rotational speed (max.): 12,000 rpm, rotational speed (min.): 15 rpm, overall weight: 17,600 kg, Mazak Integrex E410H-II Gisdpfx Ajy T Hxgsnljw 2008mod Mazatrol Matrix The price its without dismantling

Condition: good (used), Year of construction: 2012, Max cutting diameter 584mm, 845mm swing, 165mm bar capacity, 2,000rpm spindle 24 station turret, 30kW motor power, 3 jaw chuck, Godpfx Ajyu N Tzsnlsiw Mazatrol Matrix Nexus control, tool setter, tailstock, swarf conveyor, fixed steady

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 Gijdpfoy Txrxjx Anlow EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Serial Number: 142031. Date: 1999. Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Hydrafeed barfeeder NOT included. This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs. Gijdpfjtz A Dfex Anljw

Condition: used, Year of construction: 2003, functionality: fully functional, Mazak Quick Turn Nexus 150/500 YOM 2003 Mazatrol PC Fusion Control Mazak Tool Length Measuring System Serial Number 166285 Main Spindle has been fully refurbished 8 Station Turret Programable Tailstock Parts Catcher Swarf Conveyor RH exit Machine has been fully serviced Gedpfjyplgtsx Anleiw Complete set of Machine Manuals UK buyers - Price £19,995 + VAT

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 Gsdpfey S Sw Sjx Anleiw • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 Gijdoy Ey Tbopfx Anlow If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1987, Technical details: Gijdpfovc Avbjx Anlew x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: good (used), Year of construction: 2006, Max cutting diameter 420mm, 750mm swing, max cutting length 1524mm, 102mm bar capacity, 3300rpm spindle, 4000rpm milling, 12 station turret, 30kW motor power, 3 jaw chuck, Mazatrol 640T Nexus control, Gisdpfxjyt H Tve Anlew 0.001 degree C axis, tool setter, tailstock, swarf conveyor

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz Giodpfozgufrsx Anlsw EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 35 kVA, torque: 168 Nm, rotational speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 125, Equipment: chip conveyor, Additional features: - B-axis - C-axis Included: - Chip conveyor - Coolant supply - Spindle cooling Godpozdth Tsfx Anljiw - 2x IFS 2000 extraction systems Disassembly, loading, and transport are the responsibility of the buyer. Sale only within the EU.

Condition: good (used), Year of construction: 2015, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 820 mm, feed length Z-axis: 720 mm, total length: 5,800 mm, total width: 3,000 mm, spindle speed (min.): 12,000 rpm, tool length: 300 mm, I am offering a Mazak VTC820/30 KUZEL ISO40 CNC 3-axis machining center, manufactured in 2015. Giodpeyq Hgdofx Anlow Manufacturer: Mazak Model: VTC820/30 Year of manufacture: 2015 Condition: good The price is still negotiable. If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm Gisdeyg N Shspfx Anlew spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Accessories: chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCN410 was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 410 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN410 vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 900 x 410 mm • Spindle taper: No. 40 (CAT 40) • Rapid traverse (X/Y/Z): 36 m/min • Spindle motor: AC 18.5/15/11/7.5 kW • Power supply: 3-phase, 200 V, 50 Hz • Rated capacity: 28.3/23.32 kVA • Compressed air: 5 bar / 200 l/min Gsdpey R D N Refx Anloiw • Floor space: 2,000 x 2,600 mm • Standard equipment: flood cooling, tool life monitoring, worklight Additional equipment • Chip conveyor (hinge type) • Coolant tank • Chip bucket

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 16 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale here is a Mazak VTC 200C II including a Kitagawa rotary table (4th axis). The machine is in very good condition and immediately ready for operation. Inspection under power is possible at any time. Transport and installation can be offered upon request. Technical Data: Control: MAZATROL 640M Machine width: 2819 mm Machine height: 2870 mm Machine weight: 9100 kg Table length: 2000 mm Table width: 510 mm X-axis travel: 1660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Equipment: - Number of tools: 30 - Spindle power: 15 kW - Spindle speed: 12,000 RPM - Through-spindle coolant 16 bar - External coolant - Renishaw measuring probe OMP60 Giodpjy Ndzdjfx Anlow - Kitagawa 4th axis - Automatic warm-up function The main spindle was replaced or renewed in 2025.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II MY Max. turning diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control Mazatrol Matrix Nexus 2 - KITAGAWA three-jaw chuck B-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher Giodpjyy Ad Esfx Anlow - NC tailstock - reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: used, Year of construction: 2005, MAZAK QTN 200M, year 2005 Mazatrol Fusion 640T C-axis driven tools Chuck: 200mm Spindle bore: 65mm Turning length: 500mm Turning diameter: 380mm 12-position turret Tailstock Measuring probe -Chip conveyor -4 driven toolholders (2/2 configuration) -8 standard toolholders -Machine documentation Gjdpfxszgumvs Anloiw

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. • Tool magazine: 30 positions • Control: Fusion • Table size: approx. 1300 × 550 mm • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40 Giodpfsx Enlrsx Anljw

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,960 h, functionality: fully functional, machine/vehicle number: 238911, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,325 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,400 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,325 mm Table area (L x W): 800 x 800 mm Spindle speed: 8,000 rpm Spindle torque: 1,218 Nm Tool changer positions: 80 Gsdpfjzi Ai Rjx Anljiw MACHINE DETAILS Number of pallets: 2 Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 3,000 x 3,500 mm Weight: approx. 30,800 kg Operating Hours (according to image) Operating hours: 54,415 h Power-on hours: 30,498 h Cutting hours: 25,960 h EQUIPMENT Tool magazine for 80 tools, SK 50 DIN69871 Air blow-off device on the workpiece Interface for high-pressure cooling system 70 bar, Knoll Chip conveyor Preparation for Mazak Monitoring System B, optical probe type OMP60 Synchronized tapping Rapid traverse with constant pitch during angular movements 2-pallet changer Spindle with increased torque NC rotary table with 360,000 positions MAZAK Monitoring System B, optical probe type OMP60 Automatic tool length measurement

Condition: used, machine/vehicle number: 33548, turning diameter over bed:533 mm Godpfxjcxxuco Anleiw turning diameter over slide rest:340 mm turning length:2000 mm centre height:270 mm turning diameter in the gap:720 mm spindle bore:80 mm :12 turning speed range:25 - 1500 U/min feeds::76 travel of compound slide-rest:110 mm spindle travel:360 mm taper MK:4 bed width:370 mm weight of the machine ca.:2,87 t dimensions of the machine ca.:4,1 x 0,95 m

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Gedpfx Anstmtktsljiw Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,660 mm Travel range Y-axis: 760 mm Travel range Z-axis: 660 mm Table size: 760 x 2,000 mm Table load capacity max.: 1,200 kg Giodpfozb D N Rsx Anlsw Tool holder: SK 40 Tool changer: 2 x 24 Tool diameter max.: 80 mm Tool diameter with free adjacent slot max.: 110 mm Tool length max.: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control system: MAZATROL M-PLUS Dimensions & Weight Space requirement: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been regularly serviced.

Condition: used, Year of construction: 1984, x-travel 1000 mm Giedpfxjtqqk Is Anlow y-travel 508 mm z-travel 460 mm size of pallet 1240 x 550 mm numbers of pallets 2 workpiece weight 800 kg spindle taper ISO 40 spindle motor 5,5 kW turning speed range 28 - 4000 U/min no. of tools in magazin 30 control MAZATROL M 1 total power requirement kW weight of the machine ca. 5,6 t dimensions of the machine ca. 4,50 x 3,00 x 2,65 m acc.: chip conveyor