Used Mccloskey S80 for sale (208)

Condition: new, Year of construction: 2024, operating hours: 129 h, Storage location number: 100637990 Transport dimensions (L x W x H): 0 x 0 x 0 Gsdpfxszkzyqs Aayokb ---- good condition

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,101 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Shopmill 3 D Formingstar, spindle speed (max.): 12,000 rpm, coolant tank capacity: 900 l, The machine is in very good used condition with no outstanding maintenance required! TECHNICAL DETAILS Travel distance in long-operation X-axis: 1,800 mm Travel distance swivel table X-axis: 1,020 mm Travel distance rotary table X-axis: 675 mm Travel distance in pendulum operation: 675/675 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 600 mm Spindle speed: 12,000 rpm Gsdpfxsy A Rzdj Aayjkb Swivel range: +10° to -100° × ±360° Feed rates X/Y/Z: 40 m/min Rotary-swivel table Rotary table size: Ø 620 × 500 mm Interference circle diameter: Ø 700 mm T-slots: 18 mm T-slot spacing: 100 mm Number of T-slots: 5 Reference keyway: 18H8 Centering bore: 30H7 × 10 mm Swivel range: +10° to -90° × ±360° Swivel speed 90°: 1.2 s Swivel accuracy: < ±10″ Rotary speed: 0–30 rpm Indexing accuracy: < ±6″ Axial runout: 0.015/Ø 300 mm Table load capacity: max. 375 kg Fixed machine table Clamping surface: 1,120 x 750 mm Max. tool weight: 10 kg Max. tool length: 330 mm Max. tool diameter: 80 mm (100 mm with adjacent pockets free) Chip-to-chip time approx.: 7.5 - 12 sec. Tool stations: 30 MACHINE DETAILS Internal coolant supply (IKZ): 40 bar Coolant tank capacity: 900 liters Tool holder: SK40 Control: Siemens 840D Shopmill 3D Formingstar Standby magazine Total positions: 190 Levels: 6 Tool length A: max. 240 mm Capacity A: 100 pcs Tool length B: max. 330 mm Capacity B: 90* pcs Tool change time: approx. 17–22 s Space required: 1,780 × 1,760 mm Height: 2,810 mm Weight: approx. 950 kg Spindle hours: 24,101 h Power-on hours: 62,438 h EQUIPMENT 3D touch probe Rotary-swivel table

Condition: used, SURFACING AND JIG BORING MACHINE DUAP ZS 80/1400 • Maximum piece length: 1500 mm • Minimum piece length: 70 mm • Maximum piece diameter: 80 mm Gedpfx Aozcprmeayokb • Minimum piece diameter: 10 mm

Condition: new, functionality: fully functional, overall weight: 620 kg, Year of construction: 2024, New shredder attachment for excavators from 7 tons upwards, 360-degree rotating. Made of Hardox steel. Dimensions can be seen in the photos. Gjdpfx Ajzkau Hsayekb

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 -Dimensions: 200/65/H105 mm Gkedpfsyhmx Isx Aayob -Weight: 0.9 kg.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Gkedpfxjyb Nc Ns Aayob Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, Genie S-80J TraX telescopic boom lift, new, used - demonstration machines available Gjdpfx Ajrqfrqeayokb

Condition: like new (used), controler for resistance weldingmachines Dalex and others Gsdpfxsyrx Ngo Aayekb T 8036 T 8036 S3 MPS 8043/1 MPS 8043 IQ available from stock

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Gkodpfx Aaoyb D Dbjyeb Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: good (used), functionality: not functional, space requirement length: 8,000 mm, space requirement width: 4,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 2,000 mm, total width: 2,100 mm, total length: 5,000 mm, type of input current: three-phase, input voltage: 400 V, power: 22 kW (29.91 HP), shaft diameter: 127 mm, DRAIS" TYPE S8000 double ribbon mixer - Tank capacity approx. 8000 L. Gksdpfeu D Ihvsx Aaysb Tank: stainless steel construction L x W x H = 3350 x 1800 x 1800 mm Machine sold without motorization but with partial coupling to keep or change Recommended gear motor not supplied 3 x 400 V- 22 KW - 10 rpm - Torque 60940 Nm Central drain at 500 mm Sealing by stuffing box Shaft diameter 150 mm Stainless steel cover Product feed via trapdoor 500 x 300 mm - 4 nozzles diameter 80 mm + 1 nozzles diameter 100 mm and two 150 mm diameter lights Overall dimensions L x W x H = 5000 x 2100 x 2000 mm approx.

Condition: good (used), Loos 8000kg/h. Bj.2001. top condition. incl. Weishaupt burner G70 Gkjdpjm Rhd Djfx Aayeb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Gedozlhnqspfx Aayekb Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

Condition: new, Year of construction: 2025, power: 80 kW (108.77 HP), motor manufacturer: Yunnei - DEF47CZAA5, General information Field of application: Construction Weights Empty weight: 2.500 kg Functional Generator capacity: 80 kVA Dimensions of cargo space: 300 x 115 x 200 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = Gkjdpfx Ajuidypoayjb - Battery - Control Panel - Tank

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting width (max.): 3,500 mm, saw blade diameter: 320 mm, overall weight: 4,800 kg, cutting length (max.): 4,200 mm, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg Gkodsyc Sggjpfx Aayeb EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: used, Part suitable for: trucks VAT/margin taxation: VAT deductible Type number: 1700557 Godpfsyrg Anox Aayekb

Condition: used, Part suitable for: trucks VAT/margin taxation: VAT deductible Type number: ATRC 617 Gkodeyrg Azjpfx Aayjb

Condition: used, Part suitable for: trucks VAT/differential taxation: VAT deductible Type number: 1700557 Gkodpfxjyrgtgs Aayeb

Condition: ready for operation (used), SEW Eurodrive DRS80S4/FT/MM11/LN three-phase motor, serial number: 01.1580695901.0001.11 + MM11D-503-00 inverter, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gedpfxsi D N N No Aayokb

Condition: new, Year of construction: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 80 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 1780*1260*2530mm; weight: 856kg. Gjdpjv Nm Uuofx Aayokb

Year of construction: 2025, condition: new, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 80 cycles/min; bag sizes: L(40-300)xW(70-270)mm, (double film pulling possible for longer bags); suitable film width: 160-560mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 5.5kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 2266*1416*2538mm; weight: 940kg. Gjdpjv Nnafofx Aayekb

Condition: new, Year of construction: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 10-1500g; volume per weighing head: 2.5L; weighing accuracy: X(0.5); discharge flap: double flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 80 cycles/min; bag sizes: L(40-300)xW(70-270)mm, (double film pulling possible for longer bags); suitable film width: 160-560mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 5.5kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 2266*1416*2538mm; weight: 970kg. Gksdpfx Ajv Nnaloayob

Condition: new, Year of construction: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 10-1500g; volume per weighing head: 2.5L; weighing accuracy: X(0.5); discharge flap: double flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 80 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 1780*1260*2530mm; weight: 890kg. Gjdpfx Asv Nm Uzeayekb

Condition: used, Part suitable for: trucks Price: On request VAT/margin scheme: VAT deductible Gkodpfxsytfdte Aayeb Type number: ATRB 967

Year of construction: 1992, condition: used, Technical details: voltage: 380 V/Hz sizes from - to: Ø 6 bis Ø 50 mm total power requirement: 1,5 kW weight of the machine approx.: 293 kg Gkedpfxovc Atgs Aayob dimensions of machine: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled pressing with assembly tools Hydraulics 240 bar overpressure, capacity/capacity for 20 liters Electro-hydraulic drive Operation ON/OFF switch and foot control Machine is currently equipped with jaw set DN 12 16 (code 220) Further jaw inserts available: DN 6 - 10 (code 215) DN 20 - 25 (code 230) DN 32 (code 240) DN 40 (code 245) DN 50 (code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39 *

Condition: ready for operation (used), Festo EMME-AS-80-S-LS-AMB servo motor 2093107 H9 SN: 3S7PLKFNKLX, used, in good condition, 100% functional, delivery as per photos. Gksdpfx Aajx Ernqeyjb