Used Mvd Syncro Hydraulic Bending Press for sale (25,465)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: CE marking, documentation/manual, Capacity: 4050 mm x 175 Ton Distance between frames: 3600 mm Stroke: 265 mm Control: DURMA DT15 (3D Touch Screen) Serial No.: 73362219436 Cedpfjyrdgqjx Al Iegt Dimensions: 5200 x 1900 mm Height: 2930 mm Weight: 12,750 kg

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Cedpfxjy E Ey Tj Al Ijgt Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: good (used), functionality: fully functional, pressing force: 65 t, stroke length: 200 mm, table width: 600 mm, table length: 1,250 mm, throat depth: 500 mm, ram plate width: 600 mm, ram plate length: 1,250 mm, distance table to ram: 650 mm, total length: 2,300 mm, total width: 1,400 mm, total height: 3,000 mm, overall weight: 7 kg, Capacity: 65 tonnes Adjustable stroke: 200 mm Upper and lower table dimensions: 1250 x 600 mm Longitudinal groove in addition to transverse grooves, allowing for the installation of a bending tool. Indicative bending capacity at maximum power: 10 mm over 1000 mm (tool not supplied) Table/ram opening (open): 650 mm Cgedpsyz Sgxjfx Al Ijt Table/ram opening (closed): 445 mm Throat depth: 500 mm Machine dimensions: 2300 x 1400 x 3000 mm Weight: 7 t

Condition: new, bending length: 3100sheet thickness: 8upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: variable rotation speed EURO 4.682.00 Cgjdpfjd Ab Tgjx Al Ijt Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 7.070.00 We have many references!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Cgjdjyxhq Iopfx Al Ijt Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping Cgsdpfsyxhp Djx Al Ist - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Codpfx Aloxu N H Hs Iegt

Condition: new, sheet length: 2600sheet thickness: 6upper roll diameter: 190Side Roll: 170prebending: 4motor: 3messurements (LxWxH): 4450 x 1080 x 1160weight approx.: 3350 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: Codpfx Aled Ab Tns Iegt - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Cjdpfoyupuljx Al Iogt Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, functionality: unexamined, Press with hydraulic unit for sale Csdpfx Alew Izrij Iogt

Condition: new, bending length: 4100sheet thickness: 9upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Cedpfx Aod Ab S Hsl Iogt Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 10.250,00 We have many references!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, stroke length: 1,500 mm, overall weight: 50,000 kg, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. The press is currently in Poland, 63-300 Pleszew, Poland. Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. Cgedpfx Aswtbc Tjl Iot It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: new, pressing force: 20 t, machine/vehicle number: DF0233, pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t Cjdpefxyi Sjfx Al Ijgt :5 Zoll

Condition: used, Year of construction: 2019, pressing force: 100 t, pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm Cgjdpoffamxofx Al Ijt table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

Condition: good (used), Year of construction: 1966, machine/vehicle number: 11473, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, stroke length: 150 mm, table width: 270 mm, table length: 3,000 mm, table height: 880 mm, distance table to ram: 1,500 mm, oil tank capacity: 150 l, total length: 1,300 mm, total width: 3,250 mm, total height: 2,160 mm, overall weight: 1,500 kg, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this quality Eitel straightening press / hydraulic press / shaft straightening press. -> Year of manufacture: 1966 -> Straightening force: 40 t, 4.0 kW -> Stroke: 150 mm, max. 1500 mm between centers -> Table: 270 x 3000 mm -> Carriage with centers and dial gauges, movable; centers are spring-loaded -> Straightening stroke adjustable on the shaft via handwheel; hand lever with cam control -> Straightening stroke range approx. 20 mm by turning the hand lever with cam -> Precision straightening in hundredths of a millimeter possible -> Weight: approx. 1.5 t -> Height: approx. 2.10 m Codpfoyzg Ttox Al Ijgt -> Original operating manual included -> Video available upon request The machine is in good condition and fully functional! If you have any questions or would like more information, feel free to send us a message or give us a call.

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Codsyabf Hopfx Al Iegt

Condition: good (used), Hydraulic Punching Machine Type EHS, HE - Punching force approx. 12t (EHS-120) to approx. 20t (HE-20) - Power approx. 2.2kW / 3kW - Stroke approx. 100 mm - Two-hand safety control, alternatively foot switch Cgjdpfxod A Tp To Al Iot Further hydraulic and pneumatic punching machines available in stock. Do you need the right punching tool? – Let us know. We will be happy to provide you with a suitable offer.

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 3,000 mm, control type: CNC control, Hydraulic 6-Axis CNC Press Brake Manufacturer: TRUMPF Model: Truma Bend V 230 Year of manufacture: 2001 Cjdpfx Aloyw Ubws Iogt Control: CNC Graphic Press force: 230 tons Bending length: 3060 mm Installation height, max. distance between lower edge of punch and upper edge of die holder: 535 mm Ram tilting: +/- 10 mm Clear gap between uprights: 2690 mm Throat depth: 410 mm Table width: 200 mm Working height with 100 mm usable tool height: 1050 mm Speeds: 200 mm/sec Y-Axis: Rapid traverse / Working stroke / Return X-Axis: 500 mm/sec R-Axis: 300 mm/sec Accuracy1 * Axis positioning deviation: Y-Axis: 0.01 mm X-Axis: 0.04 mm R-Axis: 0.08 mm Stroke Range / Backgauge travel: Y-Axis stroke: 365 mm X-Axis travel: 600 mm Max. backgauge range in X: 860 mm R-Axis travel: 250 mm Control: DA 65 Standard features Additional equipment Connected load: 38.5 kVA Electrical connection approx. Pneumatic connection: 6-7 bar Dimensions and weight: 3660 x 2310 mm (L x W) Required footprint (Length x Width) Height: 3059 mm Weight (approx.): 18,210 kg Equipment: Crowning via control Bending aids via control Backgauge via control

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Codpfjy Ampdox Al Ijgt Noise level: < 70 dB(A)

Condition: new, sheet thickness: 10bending length: 3100upper roll diameter: 270messurements (LxWxH): 5600 x 1450 x 1600prebending: 8motor: 11Bottom Roll Diameter: 250Side Roll: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: DescriptionQtyNet Price (¤)Heating + Cooling11.477 ¤Variable Speed Rotation13.323 ¤Material Feeding Table 1000 × 2000 – 1 pcs12.414 ¤Central Support15.857 ¤Central Support Preparation1888 ¤Side Supports Left and Right15.020 ¤Side Support Preparation vs Standard1923 ¤Control System CNC-CS618.200 ¤Control System NC-CS617.721 ¤Ejector System113.020 ¤ Cgjdpfx Aljd Ab R Se Ist We have many references!

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Cgedpfx Aehmmfkel Ist Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Cgedpfjwki Apex Al Iet Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: new, pressure 100 t stroke 400 mm 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW Cgsdpfx Alsyv N Ngs Ijt weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, pressure 20 t Cgsdpfx Alsyv Nuvj Iet stroke 150 mm dayligth 700 mm 500 mm 195 mm weight of the machine ca. 200 kg Overall size 670x870x1900 mm Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: used, 60 to stroke 400 mm Cgjdpfx Aljyv Nm Se Ijt dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark