Used Negri Bossi 5500H-4250 for sale (169)

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation Ledpfx Ajxaax Reifshi * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Lhedpfxsxacfgj Aifsi * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Lhsdpeymx S Djfx Aifoi Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: new, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/sec return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm back stop - adjustable max. 800 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 7524 kg range L-W-H 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system Lhjdpfx Ajxab Hisifji - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes

Condition: used, Year of construction: 2008, pressure 180 t chamfer lenght 3110 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 210 ltr. operating pressure max. 240 bar control DELEM total power requirement 15.0 kW weight of the machine ca. 11.200 kg. range L-W-H 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model “DA 66W” * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality LCD screen (TFT) * Swivel control panel, front left Lhjdpfx Aijxa Hivjfji - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) * with 2x manually adjustable stop fingers - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor table crowning - ROLLERI upper tool adapter (quick-change clamping) * including crowning device in the tool holder - 2x front, sliding support arms (“sliding” system) - Side guard (swivel doors) - Rear guard (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF)

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m Lhjdpfeym D E Asx Aifsi

Condition: used, Year of construction: 1994, machine/vehicle number: 628.16.010032, power: 3,600 kW (4,894.63 HP), fuel type: diesel, rotational speed (max.): 1,000 rpm, Generator: 4250 KVA, 50 HZ, 10000 V Ledpjxmu Rbjfx Aifehi

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw Lhodpfxeyaiiys Aifoi • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2170x2080 mm Weight 4250 kg Total power requirement 81 kw Lhjdpfxevz Hwto Aifsi

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TRADE FAIR MACHINE Hydraulic press brake Type: SPEEDBEND 3100 x 175 t 7-axis CNC (Y1 – Y2 – X – R – Z1 – Z2 – X5) Capacity: 175 t Working length: 3100 mm Clearance between uprights: 2600 mm Throat depth: 410 mm Lodpfxoy Ed Euj Aifohi Adjustable stroke: 275 mm Daylight between upper and lower table: 550 mm Working height: 900 mm Approach speed: 180 mm/s Working speed: 10 mm/s Return speed: 190 mm/s Motor power: 15 kW Dimensions: 4250 x 2150 x 2800 mm Weight: 9086 kg Equipped with: - Numerical control ER99, graphic 3D simulation with simulation of bending process, tools and machine. - X5 (motorized backgauge finger with +/- 100 mm offset) - Motorized rear backgauge 800 mm - Motorized Wila-type crowning system - Front support arms with T-slot and millimeter scale - Upper and lower tool length - Laser front safety devices mounted on movable brackets with PLC and test procedure at startup in accordance with applicable regulations - Hydraulic oil included in delivery 2-year warranty For complete description and technical data, see

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 42,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, navigation system, onboard computer, - Heated mirrors - Leaf suspension - Differential lock - High beam - Speed limiter - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Sun visor Mercedes-Benz Arocs, Model Generation 5 3540, 8x4 EURO 6e EuromixMTP EM 9 L NEW - without registration - Vehicle specifications: Engine: OM470, inline 6-cylinder, 10.7 l, 290 kW (394 hp), 1900 Nm, Euro 6e Transmission: G 230-12/ 11.7-0.78, offroad driving program, PowerShift 3 automatic Front axle: 7.5 t, rear axle: crown wheel 233, planetary, 13.4 t Front axle tires: 315/80 R 22.5, rear axle tires: 315/80 R 22.5 Wheelbase: 4250 mm (frame overhang 1000 mm) Cab: M-cab, Classic Space Disc brakes on front and rear axles Fuel tank: 320 l, left side, 735 x 700 x 750 mm, aluminum - AdBlue tank: 25 l Cab rear wall with window - tinted windshield Light sensor - daytime running lights Roof hatch/ventilation flap Exterior sun visor, transparent Multifunction steering wheel Multimedia cockpit Air conditioning Cruise control Vehicle class: N3G, off-road vehicle Central locking system EUROMIX MTP - Mixer body EM 9 L Model: EM 9 L Nominal capacity: 9 m³ ready-mix concrete Mixing drum lightweight design Mixing drum made of HARDOX S450 Mixing spirals made of HARDOX S500 Gearbox: ZF-P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Integrated oil cooler: ASA Mixing control: mechanical, start/stop electrically Compressed air water system Water connection at the platform with hose Water filling line, single-sided with C-coupling Mixing drum with service hatch Ladder with access platform Rubber fitting on feed hopper Swiveling single-arm discharge chute, steel Wear plates in hopper, discharge bowl, and swiveling chute Drum locking device for maintenance Polyurethane primer Weight approx. 3,425 kg, variance +/- 5% Emergency stop in line with EU safety regulations Aluminum mudguards over rear axles 2x extension chutes, steel or plastic Water system Water tank 500 l (compressed air) Steel water tank Shut-off valve below water tank on intake line Water connection "C" coupling Operation & Electrification: Mixer controls – mechanical (rear) Start-Stop system (with EDC) Geometric volume: 15,120 L Water tank volume: 9,745 L Tank inclination: 12.3° Length: 6,785 mm Width: 2,300 mm Height: 2,693 mm Special equipment: Extension chute, plastic/steel/aluminum Folding chute, plastic (or steel) Retaining flap for swiveling chute Plastic tool box Stainless steel storage box Additive container (non-pressurized) Additive pressure container Shovel holder ¾ drum cover Lhjdoypalqspfx Aifoi Reversing camera LED work lights EuromixMTP intelligent drum control (electronic mixer control) Step on underrun protection with handrail Water meter Pressure gauge Frame cover Fire extinguisher Holder for concrete delivery pipe (5 m) Transition piece for delivery pipe (reduction chute) Hydraulic support for chute Year of manufacture: 2026...

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, air conditioning, central locking, differential lock, electric window regulation, onboard computer, - Heated mirrors - Leaf suspension - Differential lock - Air conditioning - PTO (Power Take-Off) - Reversing camera X TO GO “EUROMIX TO GO” OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WITH AN URGENT NEED (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your advantages: - Immediately operational complete vehicles (concrete mixer/tipper) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price/performance ratio Ledpfsyn Nqmjx Aifohi - Financing options - Trade-in of your used vehicles Mercedes-Benz Arocs Model Generation 5 3743, 8x4 EURO 6e EuromixMTP EM 10m³ L NEW - without registration - Vehicle Equipment - Engine OM470, R6, 10.7 l, 316 kW (429 hp), 1900 Nm Euro6e - Transmission G 230-12/ 11.7-0.78 offroad drive mode PowerShift 3 automatic - Front axle 9 t, rear axle crown wheel 233 planetary, 13.4 t - Front axle tires 385/80 R 22.5 - Rear axle tires 315/80 R 22.5 - Wheelbase 4250 mm (frame overhang 1000 mm) - Cab: M-cab Classic Space - Disc brakes on front and rear axles - Fuel tank 320 l, left, 735 x 700 x 750 mm, aluminum - AdBlue tank 25 l - Cab rear wall with window - tinted windscreen - Light sensor - daytime running lights - Roof hatch/ventilation flap - Exterior sun visor, transparent - Multifunction steering wheel - Multimedia cockpit - Air conditioning - Cruise control - Vehicle class N3G, off-road vehicle - Central locking system Concrete Mixer Equipment: EUROMIX MTP - Mixer superstructure EM 10 L - Lightweight design - Model: EM 10 L - Rated volume 10m³ ready-mix concrete - Mixing drum in lightweight design - Mixing drum made of HARDOX S450 - Mixing spirals in lightweight version made of HARDOX S500 - Gearbox make ZF-P5300 - Hydraulic pump make Bosch Rexroth - Hydraulic motor make Bosch Rexroth - Integrated oil cooling system - Mixer control mechanical and electric start/stop - Compressed air water system - Water connection on platform with hose line - Water filling line, one-sided with C-coupling - Mixing drum with a service hatch - Access ladder with platform - Rubber attachment on charging hopper - Swiveling, single-arm discharge chute made of steel - Wear plates in charging hopper, discharge chute, and swivel chute - Drum locking device for securing the drum during maintenance - Polyurethane primer - Weight approx. 3,650 kg, tolerance +/- 5% - with emergency stop function according to EU safety standards - Mudguards made of steel over the rear axles - 2x extension chutes made of steel or plastic - Water system - Water tank 500 l (compressed air) - Water tank made of steel - Shut-off valve below the water tank installed in the fill line - Water connection with “C” coupling - Controls & electrics - Mixer control – mechanical at the rear - Start-stop system (with EDC) - Geometric volume 17,361 L - Water tank volume 11,121 L - Angle of tank 11.3° - Length 7075 mm - Width 2300 mm - Height 2748 mm General Information Year of manufacture: 2026 Usable material: Concrete Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: ...

Condition: new, capacity 90 degrees: round 350 mm Lhodpfx Aijfg E Hlsfji capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement • Hydraulic damping function • Hydraulic compression function • Hydraulic pusher • Four cylinders • 7" touch color display Ledpfx Aiext Rdwsfjhi • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Year of construction: 1968, condition: good (used), machine/vehicle number: 00248, Offer 22311 Technical data: - max. working width 3100 mm - max. cutting capacity St 40 8 mm - motorized back gauge 10 - 750 mm - front angle gauge - stroke rate up to 30 strokes/min - drive 400 V / 2 x 6.5 kW - space required incl. back gauge, without front support arms Lhjdpfxsh U Sd Hj Aifji - approx. W 4250 x H 1500 x D 2450 mm - weight approx. 11000 kg

Year of construction: 2008, condition: good (used), - OFFER 21078 - Technical data: - Load capacity, electric chain hoist: 250 kg - Lifting speed, approx.: m/min - Chain hoist operation via handheld remote control - Manual operation: lifting mechanism / traverse and longitudinal travel - Track gauge, adjustable up to approx.: 3000 mm - Hook height, approx.: 2200 mm - Crane track length, approx.: 4000 mm - Overall height, approx.: 3500 mm - Lower crane girder, approx.: 2700 mm Lhsdpfegl Ap Nox Aifei - Lower longitudinal rail, approx.: 3000 mm - 4 steel supports made of rectangular tube 150 x 100 mm, H 3500 mm - 2 longitudinal frame supports, approx.: 4250 mm - Traverse frame support, approx.: 3000 mm - Weight of the system, approx.: 1000 kg

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms Lsdpfx Aotqmvzsifjhi - split pointing tool, - universal die

Condition: used, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,300 mm, · Bedienertyp Sitzen · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg Lhsdpfxoyhrfaj Aifoi · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Clamps / grippers 7 Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Lhedpeillukjfx Aifji Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) OPTIONAL: Optimisation software: HPO

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,020 mm, total length: 4,640 mm, · Bedienertyp Sitzen · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 747 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 7490 kg / 1475 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 2155 kg / 3810 kg · Vorderspur 1520 mm · Abstand zwischen den Hinterrädern 1630 mm · Sitzhöhe 1426 mm · Gabelträger DIN 15173 A/B 3A · Gangbreite für Palette 1000 x 1200 quer 6180 mm · Gangbreite für Palette 800 x 1200 längs 6180 mm Lhjdjyb Tqqspfx Aifoi · Wenderadius 4030 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.60 m/s / 0.60 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Zugkraft / Zugkraft (unbeladen) 6290 daN / 4250 daN · Festellbremse Haudraulik · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Motorleistung gemäß ISO 1585 65 kW · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 185 bar · Ölmenge für Anbaugerät 97 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 78 dB

Condition: new, 3 UNITS AVAILABLE FOR EXPORT Brand: MERCEDES Model: AROCS 4145B – 8X4 – Euro 3 Cab: Short – S Steering: Left-hand drive Lhedpfxewvi Nao Aifsi Mileage: New Color: MERCEDES WHITE 9147 Engine: 450 HP – Euro 3 Fuel tank: Diesel – 320 liters, aluminum Gearbox: G 260-16/11.7 – 0.69 Tachograph: NO Wheelbase: 4250 mm Kerb weight: 14,400 kg Gross vehicle weight: 41,000 kg Rims: STEEL Tyres: 315/80 R 22.5 Spare wheel: NO Brakes: Front and rear disc brakes Suspension: Leaf springs Concrete mixer: STETTER AM 10 FHC BL 810 Capacity: 10m3 Air conditioning: YES Radio: YES with USB port and Bluetooth

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Ledpfxevxhnue Aifshi Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE safety features - Support arm with ruler and side stops Lhjdpexwvptefx Aifei - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg

Condition: used, Year of construction: 2006, No. 10034 2 pieces stationary single shaft shredder Doppstadt DW 2560 E1 Stationary single-shaft shredder Doppstadt DW 2560 E1 (1 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 600 operating hours Motor electric Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Including replacement gearbox Filling width 1900 mm / Filling length 3060 mm Motor: Manufacturer T-T Electric / Type DC motor LAK 4250 C / Power 315 kW / Rated speed 2000 rpm / Armature voltage 460 V / Armature current 721 A / Field voltage 340 V / Field current 14.8 A / Degree of protection IP 55 / Cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Stationary single-shaft shredder Doppstadt DW 2560 E1 (2 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.), fire damage December 2025 (drum condition good, gearbox condition good, motor condition unclear, control unit condition burnt down, hydraulic unit condition burnt down) Since overhaul approx. 200 operating hours Motor elektric Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Lhjdpfx Aijym Edtefji For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1997, used, good condition Manufacturer: Spänex Model: SMU 4500 Year of Manufacture: 1997 Machine No.: 4500-97/59 Clean air unit / negative pressure GS dust tested CE type tested Motor: 5.5 kW Connection diameter: 250 mm Pressure: 2400 Pa Air capacity: 4250/3530 m³/h nominal volume flow Discharge drums: 2 pcs of 230 l each Filter area: 22 m² Lhjdpfew U Emqsx Aifji Filter cleaning: automatic/pneumatic New price approx. EUR 15,000.00 Space required approx. 2070 mm x 900 mm x 1965 mm Weight approx. 600 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Sold in current condition as inspected, without guarantee or warranty