Used New J&S Engineering Chamfering Machine Manually for sale (118,312)

Condition: new, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Fanuc, controller model: 0iMF, workpiece weight (max.): 800 kg, total height: 2,875 mm, total length: 4,090 mm, total width: 3,475 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 150 mm, spindle motor power: 11 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 140 mm, tool weight: 800 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, An ECOM VL10i vertical machining center is immediately available. This is a NEW machine that has never been used in production and has never been installed at an end customer’s site. Djdpfx Ajzcmhxenyouw The machine was purchased in 2021 as part of a stock program designed to ensure immediate availability for customers. This is the last unit remaining in stock, available at our facility and ready for delivery without the usual lead times required for a new machine. The machine is supplied complete with: - 10.4" LCD monitor - BT40 direct drive spindle - 24-position tool magazine with swing-arm tool changer - spindle cooling system - 30 bar high-pressure system - refrigeration system - belt-type chip conveyor - rigid tapping

Condition: used, Year of construction: 2008, Folding machine MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder - MBO Navigator Feeder - Round pile feeder: R 800 Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates Duodpjychztjfx Anyew - Second cross fold to the left / right - Noise hood over the entire folding section Excluding delivery

Condition: used, Year of construction: 2009, Folding machine MBO K 800.2/6 S-KTL Year: 2009 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Excluding pump - Machine was connected to a centralised air system Dusdpfxexg Nlmj Anyew Folding unit MBO K 800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Excluding delivery Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Year of construction: 1994, condition: used, functionality: fully functional, machine/vehicle number: 2746, We are offering this used and well-maintained Stiegler US-S 1000 Stiegler US-S with extensive accessories. This is a welded seam bag-making machine, year of manufacture 1994, fully functional. Included: - Hole punching units - Equipment for bottom gussets - C-fold triangle for flat films, max. 1380 mm - Bottom gusset function - Allen hot stamping coders - Allen thermal transfer printers - Ribbon unwinding device for adhesive strips - Collection conveyor and feed conveyors renewed - Unwinding station with folding unit - Web guiding system - Various accessories (photos available on request) The Stiegler US-S 1000 (1994) is a reliable, classic bag-making machine with a 1000 mm working width, suitable for industrial processing of PE/PP films. Minimum advance: 80 mm Maximum advance: 600 mm Maximum passage: 900 mm Minimum film width: 200 mm Duedpsywuhdefx Anyow Maximum film width (unwinder): 1380 mm Film thickness: from 0.025 mm to 0.085 mm Capacity: up to 160 cycles/min. If you have any questions or need further information, please send us a message or call us.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Dujdpfsy D Rxrex Anyow Technical Data: - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm Dusdpfeg Akgtjx Anyow working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), mileage: 105,756 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, wheelbase: 5,650 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: AdBlue, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Number of cylinders: 6 Engine displacement: 10,837 cc Dedexzq Hhepfx Anyouw Unladen weight: 20,300 kg Payload: 16,700 kg Gross vehicle weight: 37,000 kg Technical condition: good Visual condition: good

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail Dodpfswg Ru Ejx Anyjuw • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile • The bending tools are suitable for narrow and wide sheet metal for fine bending • Angle adjustment with graduation • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1000x900x1400 mm Weight 680 kg Djdpfx Anevz E Uqjysuw Total power requirement 12 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Dsdpfxevz Et Hj Anyeuw Weight 390 kg Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Weight 80 kg Total power requirement 0,75 kw Duodpevz Hf Dofx Anysw

Condition: as good as new (ex-display), Manual Coiling comp-ext-tor Spring Machine Duedoi Ik H Iopfx Anyow

Condition: used, Inverter welding machine for manual arc welding, TECHNOLIT Type PROFImat 170 Plus MMA welding machine, inverter welding machine, manual arc welding inverter New - unused Serial No.: TB1703500316 Article No.: 440030 Year of manufacture: 2022 Output WIG (DC) 170 amps, 45% duty cycle 150 amps, 60% duty cycle 135 amps, 100% duty cycle Output manual arc welding 170 amps, 35% duty cycle 145 amps, 60% duty cycle 125 amps, 100% duty cycle Adjustment range 5-170 amps, continuously adjustable Mains connection 230 volts, 50 Hz Duodpfxei E Iz Ij Anyew - Hot-start function (optimizes ignition behavior, simplifies starting the welding process for electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Stick electrode welding, suitable for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with a 230-volt Schuko plug - S-mark for welding under increased electrical hazard - Overvoltage protection Dimensions (device without cable) L x W x H 310 x 155 x 265 mm Weight (without cable) 7 kg NEW - unused, from stock

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused Dujdpfx Asvg Rh Tjnyow

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Dsdpfx Anedzqaaeyouw Weight 160 kg Good condition

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest Djdpfxoh S Uire Anyeuw -Adjustment of the upper beam by hand lever left/right

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Dsdpfx Anjfifbboysuw Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Dodpfxofifa Ao Anyjuw Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2026, Genie S-80J TraX telescopic boom lift, new, used - demonstration machines available Duederqfrqspfx Anysw

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, We are offering this used Hog Maschinen ABRADE MASTER PRO bevel and edge rounding grinding machine, year of manufacture 2009. Year of manufacture: 2009 Rated voltage: 400 V Frequency: 50 Hz Main motor rated power: 1.5 kW Main motor rated current: 16 A Dodpfoy Ir H Sjx Anysuw Secondary motor rated power: 0.12 kW Bevel and edge rounding grinding machine Variable adjustable bevel 0-12 mm Rounding 2-15 mm radius Including feed and stand Description: Belt drive electrically powered, oscillation can be switched on as needed. Feed with 4 speeds. Extraction connection Compressed air connection for belt cleaning If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, wire rod diameter range: 5,0 - 30,0 mm Dodpfx Asylb Hzsnyjuw wire rod length: 100 - 1.000 mm output: max. 60 rods per minute

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Table size: 380 x 280 mm - Adjustable stops - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dodpfxsyhq Aqj Anysuw Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Net weight: 90 kg Good condition

Condition: used, Technical details: max. wheel diameter: 600 mm max. module: 6 Duodpsya Rhkefx Anyew weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,52 x 0,91 x 1,45 m

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz Dujdpfowz Rifex Anyjw - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: new, MFR is a stand-alone machine intended to produce pallets on a smaller scale. How does it work? The operator manually feeds the machine with boards and the boards are then automatically chamfered. The chamfered boards are thereafter collected in a magazine. Machine specification: Standard performance Operators: 1 Length: Chamfering unit 3,7 m, total 5,9 m with the chamfered board magazine (2,2 m) included Width: 1,2 m Height: 1,7 m Power: 5 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Cyclone hose diameter: 100 mm Cyclone fan capacity: 1000 m³/h Machine capacity: 12 boards/min (max length 1600 mm) Standard equipment: 1 separate electric motor 3 kw 2800 r/m 2 cutters 4000 r/m Dusdpfjwduvnsx Anyow