Used Pao Mac Unloader for sale (24,273)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 2,000 mm, filling opening length: 1,020 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, year of last overhaul: 2026, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A Rodpfx Adoy Uruveiecb 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2020, total length: 2,400 mm, total width: 1,700 mm, total height: 1,700 mm, Colour: White Weight: 1.500 kg - Year: 2020 - Documentation available: No - CE certificate present: No - Serial number: 20355010 - Arbor hole saw blade diameter [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 405 - Max. cutting width [mm]: 350 - Max. cutting height [mm]: 135 - Min. workpiece length [mm]: 650 - Table width [mm]: 780 - Conveyor motor power [kW]: 1.5 - Conveyor width [mm]: 355 - Feed speed: - └ Min. feed speed [m/min]: 7.5 - └ Max. feed speed [m/min]: 30 Rcodpfxjy Uxfzj Adijb - Spindle speed: - └ Max. spindle speed [rpm]: 3800 - Voltage [V]: 400 - Fuse [A]: 63 - Transport dimensions: 2400mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, Microcut Vertical Turret Milling Machine – 5HP Microcut vertical turret milling machine manufactured by Buffalo Machinery Co. Ltd, Taiwan. Heavy duty industrial machine fitted with power feeds, coolant system and machine vice. Model: 5VK type with 5HP motor and 380V 3 phase supply. Suitable for precision engineering, fabrication, maintenance workshops, toolrooms and general machining work. Rcsdpoy R Ebnjfx Adieb Features include: Vertical turret milling head Large T-slot table Power feed controls 5HP motor 380V 3 phase Machine vice included Coolant tray and lubrication system Variable speed head Heavy cast iron industrial construction Machine is in good used workshop condition with normal cosmetic wear from industrial use. It is complete and operational. Ideal for engineering shops, maintenance departments and production work. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: used, Industrial Tempering / Heat Treatment Oven – Lister Machine Tools Heavy duty industrial tempering and heat treatment oven by Lister Machine Tools Ltd. Ideal for engineering workshops, toolmaking, heat treatment, metal hardening, tempering and industrial heating applications. Fitted with digital temperature controller and insulated chamber with front loading access door. Suitable for precision heating and workshop production use. Features: Industrial electric tempering oven Digital temperature control Insulated heat chamber Front loading design Heavy duty industrial construction Rsdpfsy R D Tisx Adijcb Mounted on steel stand Suitable for tooling and heat treatment work Condition: Used workshop condition with cosmetic wear from industrial use. Complete and operational. Ideal for engineering shops, fabrication workshops, blacksmithing and toolroom environments. Loading available on site. Viewing welcome. Transport can be arranged. Open to sensible offers.

Condition: used, Industrial Sheet Metal Beading / Swaging Machine (Jenny Machine) Heavy duty manual sheet metal swaging and beading machine in solid original condition. Ideal for fabrication shops, restoration work, ducting, panel making. Fitted with adjustable rollers and manual feed controls. Strong cast iron industrial construction mounted on original pedestal base. Perfect for forming beads, swages, strengthening ribs and edging work in sheet metal. Rodpfx Adjy R Dqueiecb Features: Manual hand operated machine Adjustable forming rollers Heavy cast iron construction Original pedestal stand Industrial workshop machine Suitable for steel, aluminium and light gauge sheet metal Condition: Used industrial condition with age-related wear and surface rust. Mechanically complete and turns freely. Ideal restoration or workshop machine. Loading available. Viewing welcome. Open to sensible offers.

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Rcsdpfoy T Nbdox Adijb Model: AS523S Year: 2021

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Rodpfsy R S Unox Adiocb Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Machine Serial Number: MF491 Rcsdpfx Aey R Srgsdisb Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Ram Travel 450mm Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Rjdpfx Aey R Skcjdiocb Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2017) Rjdoy R Rdhjpfx Adiscb Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Indexing Toolpost Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. 3 Point Fixed Steady Travelling Steady Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: SLM00072 £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2001, XYZ 1224 Surface Grinding Machine Electro Magentic Chuck 304 x 609mm Max. Longitudinal Grinding Length 609mm Max. Cross Grinding Length 304mm Max. Distance from Table Surface to Spindle Centre 508mm Max. Longitudinal Hydraulic Travel 660mm Longitudinal Travel Variable 5 – 25m/min Cross Travel Automatic Increment 0.1-10mm Cross Travel Automatic Travel 304mm Cross Feed Handwheel Per Revolution 5mm Cross Feed Handwheel Per Graduation 0.02mm Down Feed Handwheel Per Revolution 2mm Down Feed Handwheel Per Graduation 0.01mm Spindle Motor Speed 3000rpm 50Hz Spindle Motor Power 5hp Hydraulic Motor Power 1Hp Standard Wheel Dia. 355mm Standard Wheel Width 38mm Stand Wheel Bore 127m Machine Weight 1700kgs Foot Print (LW) 3550 x 2550mm Supplied with: 2 Grinding Wheels Balancing Unit Coolant & Dust extraction Toolbox Hydraulic Tanks Diamond Wheel Dresser 415V Electrics Machine Pads & Levelling Bolts Rcsdpfx Adoy R N Aioisb Low Volt Work Lamp For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79197 Machine Serial Number: 134046 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, total width: 2,600 mm, total height: 1,900 mm, Empty weight: 6.500 kg Dimensions (LxBxH): 590 x 260 x 190 cm - Details: - └ Description: Gas springs are weak - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 15 - Max. planing width [mm]: 230 Rcsdpfx Asxlthijdieb - Min. planing height [mm]: 10 - Max. planing height [mm]: 150 - Feed table length [mm]: 1570 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 120 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24 - └ Feed speed control: Incremental - Transport dimensions: 5900mm x 2600mm x 1900mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Rcsdpfx Adew Ty S Seijb Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Motorized guillotine shear Manufacturer: HM, Model: JBS 2000 x 3mm Year of manufacture: 2017 Technical data Manufacturer: HM Model: JBS 2000/3.0 Year of manufacture: 2017 Usable length: 2025 mm Sheet thickness: 3.0 mm Shear angle: 2° Motor: 4 kW Dimensions: approx. L 2.65 x W 1.85 (plus 0.4m support arms) x H 1.40 m Weight: approx. 2 t Equipment - Cutting line illumination with LED - Controlled back gauge 600 mm - Rear safety guard using a light curtain - Rubber-coated clamping beam - Self-lubricating guide rails - Angle stop - 2 x support arms - Operating manual - Small parts chute towards the front Rcsdpfxjzaawhj Adiob All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2019, Wanrooe Grinding Line Year 2019 Consisting of a single shaft crusher, a conveyor elevator of approximately 4 meters with suction installation Redewqtuispfx Adiecb

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Rcedpoy S Rqwefx Adiob Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Rcodpjymn Hwsfx Adiob Henk Hoos.

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Rcjdevtrkiopfx Adijb Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: excellent (used), power: 54 kW (73.42 HP), fuel type: diesel, color: other, mast type: triplex, Year of construction: 2019, operating hours: 2,615 h, Equipment: air conditioning, General information Year of manufacture: 2019 Technical information Number of cylinders: 4 Track width: 2.320 cm Drive: Track Engine type: Yanmar 4TNV98CT Empty weight: 9.900 kg Dimensions (LxBxH): 703 x 226 x 256 cm Functional Mast: articulated arm Mast length: 7,58 m Working width: 2.320 cm Maximum reach: 7.600 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Blower - Hammer/sorting function - Hydraulic quick coupler - Radio Bluetooth - Rotation function - Rubber tracks - Sliding leaf - Work lamp(s) = Remarks = Drivetrain Rodsy U Nuaepfx Adiecb Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Italie Powertilt and 3 digging buckets, 3-piece adjustable boom

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Rcedpsy Ni Ivjfx Adisb Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 783802 Drivetrain Drive: Wheel Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Continental Carrier engine: - Upper engine: - Rodpfx Adotvlphoiscb Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 35,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 1190603 Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Lifting capacity: 19.640 kg Other information Front tyres / undercarriage remaining: 0 Rcjdpfx Adjtvlptjisb Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.95 Additional information Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 783801 Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Rcedovbanlspfx Adiob Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, General information Field of application: Construction Serial number: 783902 Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Functional Lifting capacity: 27.480 kg Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 3.9x2.55x3.9 Additional information Redpsvban Eofx Adiecb Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 17,158 h, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Rsdpotvlplefx Adiocb Identification Serial number: 783703 Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information