Used Pcp 2000 / 1000 for sale (14,490)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The Psdpfx Amozl E Dij Tegp desalinated water/permeate is then led to consumption via a 1000 litre reservoir. The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Under normal operating conditions the RO membranes have a long lifetime. But even with a good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a slow reduction of the permeate capacity.

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind Podpfszl E Afjx Am Togp scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. Podpfxozlubdo Am Togp It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Condition: excellent (used), Year of construction: 2009, Z Arm Mixer Make: Laska 1000ltr 2009 Twin shaft, tilting discharge With tote bin hoist Ex factory, fully working Pgjdpfxszl Ah Es Am Tep

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Pjdozqab Tepfx Am Tsgp Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x EME Series 2000 inline wrap-around labelling machine with ICE Zodiac ES thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. Manufacturer - EME. Serial Number - 15066. Date of manufacture - 2015. Podpfxjy Hkqye Am Tsgp Labelling heads - 2 x EME Series 4000. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (can go higher).

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes Pjdpszn Ahkofx Am Tjgp * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system

Condition: used, Year of construction: 2009, total length: 4,100 mm, total height: 3,050 mm, total width: 1,800 mm, Colour: Grey Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Serial number: 1442 - Main motor power [kW]: 37 - Rotation speed [rpm]: 1480 - Hydraulic unit power [kW]: 2.2 - Oil tank capacity [L]: 125 - Rotor width [mm]: 1000 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 1050 - Opening length [mm]: 1300 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 26 - Number of fixed knives [pcs.]: 36 - Transport dimensions: 4100mm x 1800mm x 3050mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information Pjdpfx Amezmv Dpe Tjgp VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, total length: 1,350 mm, total width: 1,400 mm, total height: 1,750 mm, Colour: Grey Empty weight: 600 kg - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1222 - Main motor power [kW]: 5.5 - Spindle diameter [mm]: 30 Pedpfszmudbjx Am Togp - Table length [mm]: 1100 - Table width [mm]: 2300 - Tiltable spindle: - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Motor braked: Yes - Feeding device present: Yes - Brand: Steff - Type: 2034 - Number of wheels [pcs]: 2 - Number of speeds: 4 - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 9000 - Voltage [V]: 400 - Current consumption [A]: 25 - Fuse [A]: 32 - Transport dimensions: 1350mm x 1400mm x 1750mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 238,855 km, first registration: 10/1999, tire size: 13r22.5, axle configuration: 4x2, wheelbase: 4,400 mm, brakes: engine braking, color: other, driver cabin: day cab, suspension: steel, total length: 8,000 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 1998, Equipment: electric window regulation, trailer coupling, = Additional options and equipment = - Sun visor Pgedpfszgmr Rox Am Tjp - Toolbox = Further information = Tyre size: 13r22.5 Brakes: Drum brakes Suspension: Leaf suspension Front axle: Steered; Tyre tread left: 5 mm; Tyre tread right: 5 mm Rear axle: Twin tyres; Tyre tread left inside: 14 mm; Tyre tread left outside: 14 mm; Tyre tread right inside: 14 mm; Tyre tread right outside: 14 mm; Reduction: Outer planetary axles Unladen weight: 10,380 kg Payload: 8,620 kg Gross vehicle weight: 19,000 kg Damages: none

Condition: excellent (used), Year of construction: 2014, Sanding machine for wood finishing and intermediate sanding of coatings. For sanding flat or profiled workpieces made of wood-based materials. A video of the machine in operation can be sent upon request. Workpiece width (brush width) approx. 1000mm Carpet width approx. 950mm Feed rate, steplessly adjustable, 2-10 m/min Disc sanding unit consisting of 7 discs, each 250mm in diameter, arranged in 2 rows, drive motor 1.5 kW. Roller sanding unit consisting of two counter-rotating roller units, approx. 300mm in diameter, drive motor 0.75 kW each. Both units can be operated in both left and right rotation and have steplessly adjustable speed. The roller sanding unit can also be angled. Pgsdpfx Aszpf Dkom Tep Maximum workpiece height 100mm Dust extraction connection 4 x 120mm, combined into a dust extraction hood with a diameter of 250mm Emergency stop switch and additional pull cord CE marking Operating manual 2 boxes of abrasive materials are included Original paint, only a few spots have been touched up. The machine has clearly not been used much, see original photos. It is ready for immediate use. The machine is now sold under the name Discmaster. Dimensions approx. 2350 x 1400 x 1600mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2007, max. turning diameter 190 mm turning length 395 mm control FANUC Series 18i-TB weight of the machine ca. 6.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Pgodpfjzp Ry Rex Am Top Two machines are available. Price per unit. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection Psdszd Uv Eepfx Am Tjgp CE safety equipment

Condition: used, mileage: 150,000 km, power: 129 kW (175.39 HP), first registration: 04/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, total length: 7,950 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 3,100 kg, permissible axle load (axle 2): 5,680 kg, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, tail-lift, Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Axle configuration Suspension: leaf suspension Front axle: Max. axle load: 3100 kg; Tyre profile left: 90%; Tyre profile right: 90% Rear axle: Double wheels; Max. axle load: 5680 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25% Weights Empty weight: 4.210 kg Carrying capacity: 3.280 kg GVW: 7.490 kg Pgjdpfx Aozfildjm Tjp Functional Tail lift: 1000 kg Identification Registration number: BB-923-N = Additional options and accessories = - Airbag - Beifahrerbank - Front center armrest - Outside temperature display - Radio - Reversing camera - Suspension seat - Tachograph - Tined glass - Toolbox

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 540 x 540mm, Table 1120 x 540mm, siemens 810 Control, 24 Station ATC, Spindle power 15Kw, 10,000rpm, Pgodpfx Amszg Enkj Tjp BT40 Spindle, Coolant,

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, overall weight: 21,000 kg, table length: 2,100 mm, table width: 800 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 30 W, rapid traverse Z-axis: 20,000 m/min, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), table load: 2,000 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 2000 Machining Center The LAGUN L 2000 machining center stands for high precision, robust design, and economical production. Ideal for single-part manufacturing as well as series production in mechanical engineering, mold making, and contract manufacturing. Pgjdpfefdxi Uox Am Tep Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / lease-purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and long-lasting machine concepts. The machining centers impress with their reliability, easy maintenance, and low operating costs. Technical equipment: Control: HEIDENHAIN TNC 7 digital control HEIDENHAIN TFT screen 16" HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation for the integration of a 4th axis (rotary table optional) Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create a customized offer.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 Pedpfjgrzh Eex Am Togp 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, MRF FBF 2000 CNC Bed Mill, Universal Head, Fagor Control System,2000mm x 500mm tee slotted bed, speeds 45-1700 rpm, spindle 45 int, (6) tool holders, serial number 2000023, Intza lube, Jet brake safety system, operators foot kick, table guards interlocked, spindle guards interlocked, ISOFLUC Servomotors, Coolant tank, (2) self centring vices fitted on table. Pgsdjx I Sb Ajpfx Am Top

Condition: used, Model:- AY 1000 x 1000, Serial No: Nc-A3-045 1 metre swing over bed, 1 meter between centres 390mm Swing Over Saddle 180mm Spindle Bore 4 Jaw Chuck 800mm Diameter Quick Change Tool Post Fagor 8055 controls Made In Taiwan Pjdpfxeyn R Hcs Am Tsgp

Condition: used, all stainless steel Pedpozlrh Uofx Am Tegp twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: used, Year of construction: 2000, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Colour: Blue Weight: 20.000 kg Price: On request Pgedpfx Amezmaa Io Tjp - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 80960 - Drive system: CNC - Control system brand: HACO - Control system type: BC50 Graphics - Power [kW]: 22.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 300 - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Crowning system: Mechanical - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1000 mm Our high-precision 4-jaw faceplate K72 1000 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1000 mm Pjdpfxjx S Rzce Am Togp - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na

Condition: used, Year of construction: 1997, total height: 2,900 mm, total length: 4,000 mm, total width: 2,400 mm, Colour: White Empty weight: 10.000 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Heidenhain - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 - Z-axis travel [mm]: 750 - Table length [mm]: 1150 Pgedpfx Ajy Uwawjm Top - Table width [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 - Options: Tool measurement system - Transport dimensions: 4000mm x 2400mm x 2900mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, total height: 1,700 mm, total length: 3,500 mm, total width: 1,500 mm, Colour: Grey Empty weight: 900 kg - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: B02317 - Drive system: Conventional - Saw type: Semi-automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - └ Round cutting capacity at 90° [mm]: 260 - └ Round cutting capacity at 45° [mm]: 260 - Round cutting capacity [mm]: 260 - Power [kW]: 1.5 - Saw blade length [mm]: 2700 - Saw blade width [mm]: 27 - Saw blade thickness [mm]: 0.9 - Saw speed [m/min]: 19 - Workpiece clamping: Hydraulic - Options: Chip collection tray - Transport dimensions: 3500mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 3 Financial information Pgodpfx Ajzl Snhem Top VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, total height: 2,620 mm, total length: 4,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 7049-H00-KT1013 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Heidenhain - Number of axes [pcs]: 4 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 560 - Table length [mm]: 1120 - Table width [mm]: 600 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 6000 - Options: Chip conveyor, Tool magazine, External cooling - └ Tool magazine [pcs.]: 21 - Transport dimensions: 4300mm x 2350mm x 2620mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Pgjdpfx Ajzl Dy Aem Tep Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum