Used Schechtl Ht Ks 150 for sale (12,831)

Condition: new, machine/vehicle number: aaa375d3c15c697ac80fb51f9, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction, lightweight design, with slight offset, fifth wheel plate with replaceable 2" kingpin 24-ton 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarp rod with holder Tow hook at the rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles and running gear laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism with 10-year warranty against rust-through Braking System 2-line compressed air brake system with color-coded hoses for easy maintenance Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connector line EBS (Electronic Braking System) with EBS socket at the front, without connector cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle – driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor dashboard (via EBS, without truck installation — vehicle must support this; only for standard tires) Electrics 24 volt, multi-chamber tail lights, side yellow LED lighting Side yellow LED lighting linked to indicators – flashing side marker lights 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connector cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Hydraulic actuation via truck PTO Body Steel half-pipe body made of highly abrasion-resistant HB 400 steel, inclined front wall with external hydraulic cylinder mount. Folding aluminium splash guard on front right for tarpaulin. Shovel and broom holder mounted on exterior of front wall. Access inside at the front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Membrane-type rear wall Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slider in the right leaf With external locking bar and mechanical bottom lock Standing platform with access ladder, connection plate for air/electric and brake with ample space for optimal handling Tarpaulin rolls to right side (FR-right), with central locking on FR-left Registration country/License plates Hsdpoi Rizqofx Adzsn Germany Type approval according to EC 2007/46 Body strength in compliance with EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking with reflective tape according to ECE R 048, side white and rear red Painting Frame: DB 7350 Nova Grey 10-year warranty against rust-through Landing legs: black coated Body: RAL as requested, single color Tarpaulin: RAL 7035 light grey

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Special price promotion 2000.-€ discount Perforated table 1200 x 2400 x 200mm Thickness of the table top 20 mm, diameter of the holes 28 mm Swivel range 360 Height adjustment Hydraulic motor 800 to 1200mm Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Hedpfx Aouua Injdzon Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment

Condition: used, power: 1 kW (1.36 HP), Year of construction: 2025, operating hours: 1 h, Empty weight: 798 kg Please contact Emal Jaweed for more information Hsdpfxsx R T Hxo Adzon

Condition: used, Haendle box feeder BKS 1506 with steel plate conveyor, large extensions (25 cbm) and two separately driven shredding shafts for difficult material. Hodpfx Adjylx Icjzjn Suitable for clay/loam, cohesive material, substrates/humus, waste, etc. 2 units available, new control panel/PLC on request Price on request

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Hsdpfx Aex Hyhbodzsn Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU) Hodpjwf Hghofx Adzjn

Condition: new, functionality: fully functional, Year of construction: 2026, Technical specifications: Working length: 4040 mm Overall length: 4858 mm Depth: 2592 mm Working height: 920 mm Total height: 1430 mm Weight: 3450 kg Hedox Hykvopfx Adzsn Maximum cutting thickness: Steel: 2.5 mm Aluminum: 4.00 mm Stainless steel: 1.5 mm Standard equipment: ▪ Mechanical backgauge, range 0 - 750 mm, with pneumatic sheet support system; front or rear material discharge ▪ Required compressed air connection: minimum 6 bar ▪ 4 front support arms, 1000 mm, with T-slot and metric scale ▪ 2 front sheet supports, square bar type, positioned on the left and right sides of the machine, with T-slot and metric scale ▪ Blade clearance adjustment with scale ▪ Controller with digital readout (memory for 99 six-step programs) ▪ Rigid welded steel frame. Maintenance-free linear guides and bearings. ▪ Foot switch ▪ CE certificate NEW! Option to install a conical backgauge Advantages: Fast return stroke, high cutting capacity Rigid welded steel frame Maintenance-free linear guides and bearings.

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal Hedpfelbilvox Adzsn • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines Hedpjlbimaofx Adzen • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Front material support up to 920 mm 5m 32Amp cable to power the machine Hodpfx Adjl Exypozen CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar

Year of construction: 1998, condition: ready for operation (used), Max. duct cross-section: 160x160mm, max. straightening/ crosscut: 0,8-1,5x1500mm, controls: SPS-FS, without decoiler. Hsdpfx Ajhw N D Iedzjn

Condition: used, functionality: fully functional, Year of construction: 2010, working width: 2,000 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 2,030 kg, input voltage: 400 V, input current: 4 A, input frequency: 50 Hz, We are offering this used Schechtl MAX 200/CNC S-1000/1 folding machine, year of manufacture 2010. Year of manufacture: 2010 Model: MAX 200/CNC S-1000/1 Serial number: MA5726 Take advantage of this opportunity to acquire a high-quality folding machine from Schechtl. This powerful machine is ideal for anyone engaged in sheet metal processing who demands maximum precision and efficiency. Hedpeyxpc Ejfx Adzon Product details: - Model: Schechtl MAX 200/CNC S-Touch - Year of manufacture: 2010 - Condition: Used - Technical specifications: Bending length: 2,000 mm Steel 2.5 mm Aluminium 4.0 mm Stainless steel 1.5 mm Weight: 2,030 kg If you have any questions or require further information, please feel free to contact us by message or phone. "The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. From the time the machine is made available at the designated location, the buyer assumes all costs and risks, including loading, transportation, and customs formalities."

Condition: new, machine/vehicle number: 0fe2184cda24503447c582a1e, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r 22,5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts:1 x 40 feet with gooseneck tunnel The transportation of filled tank containers is excluded. Without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Container guide front plug-in 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnosis may occur although the function is given) 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (switched via reversing light) Additional LED work light(s) at the rear, switched via reversing light Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Special approval required if the overall length of the train exceeds 16,500 mm. Attention: Transport of filled tank containers is excluded! Country of approval / plates Germany Hedoi Ri Ayjpfx Adzon with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Support legs coated black Without pallet box Paint Attention: Archive pictures!

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software Hjdpfx Adjwkf Ihszjn - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Hedpjh R Tvtefx Adzsn chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Hsdpfxsu Hz Tqj Adzjn Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: refurbished (used), Pressure: 150t Length of Stroke: 140mm Table size: 510x530mm Hsdsgd H Tpjpfx Adzen

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, machine/vehicle number: 4464, total height: 1,300 mm, overall weight: 300 kg, total length: 1,600 mm, total width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Drum diameter: 700 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,300 mm Weight: 300 kg Hedpfxoy D R Dzj Adzen External reference: 46

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 200708, total height: 1,700 mm, overall weight: 300 kg, total length: 1,600 mm, total width: 1,000 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Drum diameter: 700 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,700 mm Weight: 300 kg External reference: 47 Hjdpfx Aoy D R Aqsdzjn

Condition: excellent (used), Year of construction: 2022, Ref: 11103 . 2022 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 500,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm / Top-Bottom: 30 mm Trim Height Hsdpfx Adsy T H Uhszen (book thickness/spine thickness) * 2 mm to 100 mm Production Speed: 400 to 1,600 cycles/hour

Year of construction: 1984, condition: good (used), Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg Hsdogqlhhjpfx Adzjn

Condition: used, Year of construction: 1996, functionality: fully functional, 1ST MACHINE TOSH S.R.L. TOSH LOGICA 150 Pad Printing Machine – 1996 High-quality Italian-built industrial pad printing machine manufactured by TOSH S.R.L., designed for precision printing applications across plastics, metal, engineering and promotional product industries. Machine Details Model: LOGICA 150 Manufacturer: TOSH S.R.L. – Italy Year of Manufacture: 1996 Serial No: 02960-05 CE Marked Pneumatic operation Digital programmable control panel Heavy-duty industrial frame Features Precision pad printing head assembly Adjustable work table and fixtures Electronic programmable controls Industrial pneumatic system Compact production footprint Foot pedal operation included Access to internal electronics and service panels Suitable Applications Promotional products Automotive components Plastic mouldings Industrial part marking Electronics branding Engineering components Condition Used industrial condition with cosmetic wear consistent with age and factory use. Removed from operational environment. Sold as seen in photographs. Included Machine base unit Control system Pneumatic connections Foot pedal Installed fixtures/components shown in images Shipping & Viewing 2ND MACHINE TOSH S.R.L. TOSH LOGICA 150 with PS160 Shuttle – Industrial Pad Printing Machine Heavy-duty industrial pad printing system manufactured by TOSH S.R.L. of Italy, fitted with PS160 shuttle table assembly for precision multi-position printing applications. Designed for continuous industrial production environments, this machine combines robust mechanical construction with programmable electronic controls for accurate repeat printing on engineered components and manufactured products. Machine Details Manufacturer: TOSH S.R.L. – Italy Model: LOGICA 150 Shuttle System: PS160 Year: 1996 CE Marked Pneumatic operation Digital programmable control panel Industrial steel base construction Features PS160 shuttle worktable system Adjustable printing fixture platform Precision tampography head assembly Electronic programmable controls Dual foot pedal operation Accessible rear electronics cabinet Compact industrial footprint Heavy-duty production frame Applications Condition Used industrial condition with cosmetic signs of workshop use and age-related wear. Machine removed from working environment. Electronics and internal control hardware present as photographed. Hsdpfxey Shdzs Adzen Included TOSH LOGICA 150 machine PS160 shuttle assembly Control panel Foot pedals Pneumatic fittings Fixtures/components shown in images Shipping & Inspection 3RD MACHINE TOSH S.R.L. TOSH LOGICA 01 Shuttle Pad Printing Machine – 2011 Modern compact industrial pad printing machine manufactured by TOSH S.R.L. Italy, fitted with Shuttle L190 system for accurate and repeatable component printing operations. Machine Details Manufacturer: TOSH S.R.L. – Italy Model: LOGICA 01 Shuttle System: Shuttle L190 Year of Manufacture: 2011 Serial Number: D04 CE Marked Electrical Supply: 220–240V Frequency: 50/60Hz Power: 0.3 kW Weight: Approx. 180kg Features Compact shuttle pad printing system Precision print head assembly Safety guarding and CE compliance Foot pedal operation Adjustable fixture platform Modern control interface Pneumatic industrial operation Compact production footprint Applications

Condition: used, Year of construction: 2002, functionality: unexamined, total height: 2,500 mm, total width: 1,500 mm, total length: 1,950 mm, input voltage: 380 V, Wide-belt sander from BMS Holland BV, complete with a dust extraction hood and control panel. Details: Brand: BMS Holland BV Model: SB 450 KS Year of manufacture: 2002 Design: enclosed machine housing with a viewing window Components: dust extraction hood, control panel with emergency stop and switches Hjdszab Unopfx Adzen Color: blue/white Dimensions: 1950x1500x2500 mm Voltage: 380V Condition: used Note: Machine is not connected; operational status unknown.

Condition: new, Bosch VM 60-150 supply module SN:276949 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Hodpfx Aeqp Aihjdzsn

Condition: new, Bosch VM 60 / 150 power supply module 1070046009-112 SN:275136, used, normal signs of use, 100% fully functional, delivery as shown in photos. Hjdpfx Asx Eqzpsdzjn