Used Schuler Crank Press - Double Column for sale (25,577)

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Ndjdpfx Ajgta Rcjfwea Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Nsdpfsmpfwdox Afwoda Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: new, neu ca. 4 Monate ab Auftragse Italien 164500 € 3109.05 € 260 to 500 mm 1400x1000 mm 600 mm 75 mm/s 5 mm/s 60 mm/s Ndedpoynm I Njfx Afwja 22 kW 2800 mm 1650 mm 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 123000 € 2324.7 € 170 to 500 mm Ndodeynm I Aepfx Afwsa 1200x700 mm 600 mm 110 mm/s 7 mm/s 70 mm/s 19 kW 2700 mm 1600 mm 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 78000 € 1474.2 € 85 to 500 mm 900x600 mm 600 mm 105 mm/s 7 mm/s 58 mm/s 7.5 kW 2250 mm 1150 mm 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation Nsdpfx Afeynm Ivswoda stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 71300 € 1347.57 € 60 to 500 mm 800x500 mm 600 mm 120 mm/s 8 mm/s 58 mm/s Ndedpfxsynm Ipo Afwsa 5.5 kW 1100 mm 1100 mm 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 65000 € 1228.5 € 35 to 500 mm 800x500 mm 600 mm 125 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1100 mm 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment Njdpfxoynm Iie Afwjda pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 104000 € 1965.6 € 125 to 500 mm 1200x700 mm 600 mm 115 mm/s 7 mm/s 70 mm/s Ndodpfx Aewiqxpofwoa 15 kW 2550 mm 1500 mm 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: used, Year of construction: 2008, pressing force: 300 t, table width: 1,000 mm, table length: 2,000 mm, total length: 4,000 mm, total width: 3,000 mm, total height: 4,000 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, We offer this used AIDA 300 Ton ULX eccentric press double column, year of construction 2008. Manufacturer: AIDA Ndjdpoytcwwsfx Afwsa Model: 300 Ton ULX Pressing force: 300 ton Year of construction: 2008 Condition: used Category ID: 1329 Type ID: 871 Machine type: eccentric press double column From the first owner company Machine is in great condition and in operation Used always under its capacity Used only in 1 shift from the purchase time untill now Made in Aida Japan First ULX press in Europe Delivery Terms: EXW ESKISEHIR TURKEY Payment Terms: Cash Or Letter Of Credit If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 Njdpfx Aozwg Nkjfwoda rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m The machine is equipped with angle milling heads for large engine machining. + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and misc.tools the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: used, Year of construction: 1977, pressure 160 t Nodpfx Aszwg Umefweda throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: excellent (used), Control system: Siemens 840-D X-axis travel: 2000 mm Y-axis travel: 2000 mm Z-axis travel: 500 mm Distance between columns: 2700 mm Max. working height: 1100 mm Ndjdpfjzv Hxcsx Afwsa Table: 2250 x 2000 mm Workpiece weight: 10 tonnes Spindle power: 24 kW Spindle speed: 2250 rpm Tool holder: SK 50

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered Ndsdpfx Afsuddcgswea front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min Ndjdpfx Asu I E Emsfwea surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Njdpfx Afey Tpr Ajwoda Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Condition: used The punching machine works perfectly. A functional video is available. Ndsdowgi S Nepfx Afwja

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm Njdoxukpcopfx Afwoda dayligth 550 mm throat 200 mm table height over floor 800 mm hole in the table 130 mm

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of Ndsdjwx R Rdjpfx Afwja 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Ndedpfjuddnvsx Afwsa Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Nedeygx D Hepfx Afwjda Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t Ndsdpfx Aeyif Nrsfwja die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm Ndedpsy Nd Svofx Afwoa total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1990, pressure 35 t no. of strokes ca 72 Hub/min Njdpjztf Anjfx Afwoda dayligth 195 mm total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm Njdpfx Afjztfz Roweda ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm Ndodpfxou Ix H Dj Afwea total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine approx.LxWxH: 11,5 x 6,6 x 8,4 m NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *