Used Stefani (Scm Group) Double-Side Sizing&Edge Banding Machine for sale (90,213)

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm Bjdpjy Id Nljfx Apvedd - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm Bdodpjc Tmygefx Apved work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm Bedpfx Apehy Tlrovjdd compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit Bdedsc S Di Ropfx Apvsd ...

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg Bdedpfjlc Ewiox Apvsd

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm Bodpfxozcpixs Apvjdd - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Bsdpfx Apefbr S Rovedd • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Bodpfey Ruzqjx Apvodd

Condition: excellent (used), Year of construction: 1984, Description to follow! Bdjdpfx Apozbczlovsd

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Total length 4130 mm Bsdpozafppsfx Apvsdd Feed speed 11 m/min. Weight 1250 kg

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Bodpfx Apezccuuevedd Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3.6 kW (4.89 HP), input voltage: 230 V, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: mechanical, overall weight: 11 kg, compressed air connection: 6 bar, working height: 65 mm, The perfect zero joint Bdjdpfx Ajr H Ealopved - for laser edgebands / hot-air edgebands / co-extruded edgebands - Up to 65 mm edge height - Up to 3 mm edge thickness - Mobile or stationary use - Tool-free changeover - Up to 3 mm edge thickness - approx. 4 min heating time - 230 V / 50 Hz

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor Bdsdpfx Apsdzqmhsvsd - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Good condition

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Bdodpfxsxrpkmj Apvod Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Bdsdpfx Apsza Emhovod Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Bdjdpfow S Dmdjx Apvod Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Bodpexdr Swefx Apvjdd Manual and original documentation are available.

Condition: excellent (used), Year of construction: 2007, About the machine: Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Bedpey Sphbjfx Apvjdd Machine length: 3150 mm No jointing Pre-trimming Flush cutting Radius and flush milling Radius scraper blade

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Machine number: AF / 3623 CE type-tested: yes Feed rate m/min: 10 Cutting from the roll up to mm: yes Bdodpfjzbc Edox Apved Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Workpiece width mm min: 65 Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Bsdoy Exwfepfx Apvjdd Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: AH/005553, functionality: fully functional, input voltage: 400 V, input current: 78 A, input frequency: 50 Hz, overall weight: 4,400 kg, Main specifications: • Panel thickness: max 60 mm • Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) • Feed speed: up to 25 m/min • Glue system: [EVA / PUR] Configuration: • Pre-milling unit • Gluing unit with pressure rollers • End-trimming unit • Top/Bottom trimming unit (rough & fine) • Corner rounding unit • Radius edge scraper • Glue scraper Bdedpfxszgnx Se Apved • Buffing unit Machine Condition: • Excellent working condition. • Regularly maintained. • Available for inspection and testing while powered.

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Bdsdpfoq A N Nuex Apvsd Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 8 Spindle arrangement: Bedjzgut Njpfx Apvjdd bottom, right, left, top, bottom, top, right, left Dust extraction nozzle diameter: 6 x 120 mm Infinitely variable feed rate adjustment: 4-24 m/min Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 3050 mm Width: 1200 mm Height: 1200 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Bodpfx Aowlbxlepvjdd Automatic piece return system with Winner 4A bridge unloading

Year of construction: 1997, condition: used, functionality: fully functional, We are offering this used contouring machine P. BACCI FC8-2500, year of manufacture 1997. Manufacturer: P. BACCI Model/Type: FC 8-2500 Serial number: 1346 Bdedpfxjyx S Scj Apvod Year of manufacture: 1997 Voltage: 380 V Frequency: 50 Hz Power: 30.5 kW Weight: 5100 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.