Used Sun-Tec Reinraumtechnik Heating Plate for sale (31,533)

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 output sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall itself. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L with day/night/week program - Exhaust gas discharge via the roof, version B or C - Exhaust gas discharge through the outer wall, version C Gas-fired air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Nodpjx Ihg Iefx Abuewn Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. rated heat input (Hs) QN: 30.08 kW Max. rated heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Granite measuring plate, 760 x 1190 x 700 mm Dimensions: H x W x D 760 x 1190 x 700 mm Material thickness: 800 mm Nwodpfx Asxl Rkuebusn You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Reznor UDSA Gas-Fired Air Heater, 54.74 kW, Heating Capacity 5830 m3/h UDSA Gas-Fired Air Heater – Efficient, Even at Peak Performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures uniform air distribution in industrial halls. This air heater, which is easy to install, is available in 14 sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the hall, as standard. The UDSA gas-fired air heater from REZNOR ensures uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-Fired Air Heater. The advantages: Efficiency of over 92% The device is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. The gas-fired air heaters are suitable for: - Natural gas or liquid gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation° control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via the roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas-fired air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m3/h Protection class: IP20 Part No. 0461BN0677 Nwjdpfxewb A His Abujn More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. The furnace is in excellent condition and has been used very little. Maximum temperature: 1,320°C Nodpfxsz H I N Io Abuewn Power: 30 kW Thermocouple: Type S with a 0.35mm diameter in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 85400 € 1614.06 € 4100 mm 13 mm 8 mm 350 mm 8 1/min 1.75 ° 18 62 to 1000 mm 200 mm/s 30 kW 330 l 3 Stk. 818 mm 550 mm 4520 mm 5350 mm 2250 mm 3650 mm 2250 mm 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Nwjdpfjwirynjx Abuen Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: used, Year of construction: 1983, Used Machine Year of manufacture: 1983 Features and technical specifications: - Automatic - Cutting length: 5,300 mm - Cutting height: 2,200 mm Nwsdpfx Abszyy Edjujn - Max. horizontal cutting height: 2,100 mm - Max. cutting depth: 80 mm - Motor: 5.5 kW - Saw blade diameter: 300 mm - Speed: approx. 5,000 rpm - Dimensions (L x W x H): approx. 6,550 x 1,500 x 2,950 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 3100 mm 6 mm 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Nwedpfswiqyyox Abuen Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 71600 € 1353.24 € 2050 mm 13 mm 10 mm 13 mm 10 mm 10 mm 8 mm 240 mm 240 mm 190 mm 820 mm 11 kW 3830 mm 1160 mm 1200 mm 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing Nwsdpfxeypbqbo Abuen moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 101400 € 1916.46 € 3100 mm 8 mm 8 mm 6 mm 6 mm 5 mm 240 mm 240 mm 190 mm 825 mm 11 kW 4880 mm 1160 mm 1200 mm 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules Nodpfjypbqnjx Abuewn OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: ready for operation (used), Granite – Measuring plate & height gauge TESA – Micro-Hite - Plate dimensions: 3000x1300x350 mm Nedpo Aazamjfx Abuewn - 2 x tailstock centers / center height 250 mm - Height gauge – TESA Micro-Hite / measuring range up to 600 mm Dimensions: L x W x H 3.3 x 1.4 x 1 meter / Weight approx. 3000 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). 1. Burner type: WM-G30 Output: 600-5700 kW Design: ZM Year of manufacture: 2013 Nedjzamd Uspfx Abujwn Connection pressure: 15-500 mbar

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: HDTS 2050X22, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 290 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 25 mm, overall weight: 9,800 kg, total length: 4,400 mm, total width: 2,050 mm, total height: 1,660 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 2000 X 22 MM brand OMCCA YEAR 2004 DOUBLE INITIAL PINCH Machine used in excellent condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 22 mm - Prebend thickness 16 mm Minimum bending diameter ID 400 mm Rolls dimensions: Useful length 2050 mm central rolls upper/lower D 320 mm side rolls left/right D 290 mm Hardened rolls surface high strength Driven rollers rotation central upper and lower Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. Opening of top roll hydraulic drop-end to unload the plate being formed Wide opening plate feed up to 90 mm between the central rollers Nwods Afzunspfx Abusn Variable speed working roll bending rotation automatic slow/fast Console electric on wheels with centralized commands joysticks and digital readout 3 axis. Digital position readouts of the rolls Power electric 15 Kw voltage 3-phase 380 /50 Dimension 4400 x2050 x H 1660 mm - weight 9800kgs

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Nwodj Afwnqspfx Abujn Additional information incl. 15 plates

Condition: new, For inquiries regarding the adapter plate, Mr. Herden is at your service (by phone). OilQuick OQ80 Adapter Plate / Bolt-on Adapter / NEW / in stock & immediately available Price: €4,990.00 net / €5,938.10 gross Hole pattern drawing available in the photos. - 2x 1/2" couplings - 1x 3/4" polystyrene coupling - 1x 3/4" coupling - 2x 1" couplings - Excavator class: 25 to 43 tons - Weight: 386 kg Suitable for a wide range of attachments, such as hydraulic breakers, sorting grabs, and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires drain line) - Westtech CS580 (requires drain line) - Westtech CS780 (requires drain line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 All compatible Westtech products are also in stock and immediately available! We also have many other OilQuick adapter plates available from stock! Mr. Herden (phone) is happy to assist you. We are happy to provide you with a financing offer upon request. We are an official distribution and service partner for: - OilQuick - Holp - Gierking GMT - Weber MT - Westtech - DMS - Seppi M. - Magni telehandlers - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full OilQuick product range! Errors and prior sale excepted! Njdey E Et Hspfx Abuown = Further information = Intended use: Construction Unladen weight: 386 kg Contact Marius Herden for further information.

Condition: used, floor-plate length:3140 mm floor-plate width:1800 mm floor-plate height:100 mm Nwsdj Ad Si Hepfx Abuen groove width:36 mm no. of flutes:10 flute distance:260 mm weight of the machine ca.:4,1 t dimensions of the machine ca.:3140 x 1800 x 100 m

Condition: new, NEW Nwsdpfx Abszy Nwcjusn Electric heat plates suitable for most electric Teflon band grills (contact grills) such as GEA, CFS, Koppens, Square, etc ... in casted aluminium dimensions : 590 x 600 x 67 mm 15 kW - 3 x 400 V - 50 Hz stainless steel connection hood stainless steel attachments

Condition: used, Year of construction: 1991, Used Machine Year of Manufacture: 1991 Features and Technical Specifications: - Fully automatic, floor-standing - Cutting area: 5,300 x 2,200 mm - Saw blade diameter: 300 mm - Control system for vertical and horizontal cuts - With aluminum folding stops and aluminum center support - With SUPER-CUT scoring device Nwodjzk Nx Ispfx Abuen - Motor: 3 kW - 400 V Availability: available shortly Location: 63934 Röllbach

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Nwedpfxey S Rnio Abuen -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Nwsdpfsz Arh Aex Abuen Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS hours: 84,000 hours overhaul at 60,000 hours. Nodpfx Aozwpnpsbuown Year: 2008 Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3588791, HYDAC S31A-IG16 Nominal capacity: 288 kW Nwsdpfxsx Swz Ae Abuon Heat transfer surface: 29.93 m3 Max. operating pressure: 16 bar Volume: 53 L Temperature: 0 - 100 °C

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Nsdpexhgfmofx Abujwn Height: 3500mm Weight: 7000kg

Condition: excellent (used), Marking plate-clamping plate-surface plate Length 1560 mm Width 560 mm Thickness 60 mm Weight 180 kg The plate is heavily tipped on the bottom. Surface is finely planed. T-slot 16 mm Nwjdowaxl Espfx Abujn

Condition: good (used), functionality: fully functional, machine/vehicle number: og10, 10m³ tank for diesel, heating oil or HVO Nwsdpfx Abecyb Tweujn

Condition: excellent (used), Splash plate Diameter: 500 mm Nwedpfxjfm Tqrs Abuon Weight: 68 kg Bolt circle diameter: 134 mm Center bore diameter: 96 mm