Used Tso Chimney Pipe Bending Machine for sale (65,746)

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, Equipment: swiveling upper roller, - Capacity 1050 x 3 mm - Roller diameter 90 mm Csdjq H D S Rspfx Apbsrh - Conical bending - Swing-out upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400 V

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Cedpfxjyfmwxj Apbjrh Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm Crodpfxeztfxio Apbjh total power requirement 3 kW weight of the machine ca. 2 t

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during Cjdpfxoz Dxpme Apbsrh the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Codpfxezxt Txe Apberh drive elektronisch zwei angetri

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel Credpfxexabflj Apbsh - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Credpfxsyt Ifgj Apbjh Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: new, sheet width 2600 mm plate thickness 10,0 mm Cedsxaalqjpfx Apborh pre-bending 8,0 mm diameter of upper rolls 230 mm side roll diameter 190 mm diameter of lower rolls 210 mm total power requirement 7,5 kW weight of the machine ca. 5.560 kg. range L-W-H 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: good (used), pipe diameter (max.): 25 mm, pipe length (max.): 2,500 mm, bending radius (max.): 180 mm, CNC Tube Bender Brand: StarBend Model: STAR 250 CN3-PC-S Crjdpez E U Stofx Apbeh Year: 2007 Serial Number: 072500924 Type: High-precision CNC tube bender Features: - CNC control with integrated PC - 3 numerically controlled axes - Y-axis (Bending): Controlled by a brushless servomotor - X-axis (Feed/Advance): Controlled by a brushless servomotor - Z-axis (Spatial tube rotation): Controlled by a brushless servomotor. - Tube bending with high repeatability - Max. tube diameter: 25mm (Tube wall thickness of 1.5 to 2.5mm depending on the radius) - Usable length over mandrel: 2,500 mm - Maximum bending radius: 180 mm - Programming by bending sequences - Program memory - High productivity in series production - Pneumatic internal mandrel extraction and insertion. Available Bending Kits: - TUBE 28mm Radius 61mm - TUBE 15mm Radius 35 - TUBE 22mm Radius 36mm

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. Csdpjz Aiqzjfx Apbsrh The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Manufacturer: FICOM Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Condition: good (used), functionality: fully functional, Year of construction: 2009, Still in good condition, well-maintained press brake from the renowned manufacturer Biegemaster. Csdpfxez Dnqgj Apborh Maximum processing length: 6.2 m. Suitable for material thicknesses up to 1.25 mm. Equipped with a Knauf profile upper tool.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Crjdpfxjwwt Hfe Apbeh Shaft speed (variable): 0–30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Accessories included: Rollers for 1" pipe Straightening rollers Operator's key Operating manual

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, controller manufacturer: ESA, controller model: Touch Panel, pipe diameter (max.): 30 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 4 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9783 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Max.Tube Ø: 30mm Min. Tube Ø: 4mm Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Credpfxozvfq Ds Apbeh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Crjdpfxed Eqg Hs Apboh Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection Crodpfx Aet Akt Repboh All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, number of rollers: 3, shaft diameter: 50 mm, - Shaft diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control - Emergency stop - Documentation Cedsr Ar Hvjpfx Apberh - 400 V

Condition: new, Year of construction: 2025, number of rollers: 3, shaft diameter: 30 mm, - Shaft diameter: 30 mm - Rotates both clockwise and counterclockwise - Usable horizontally and vertically Crodpexgb A Dsfx Apbjh - Foot operation - Emergency stop - Documentation - 400 V

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Csdpsxacfgjfx Apbjrh Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Serial number: 340380106175 Cjdpfxoqy E R To Apborh Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: new, number of rollers: 3, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2050 x 4 mm - Electrically adjustable rear roll - Conical rolling - Swiveling top roll Csdpfx Aopwgcuopberh - Braking motor - Emergency stop - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2026, CNC Rebar Bending Machine – GW45 | Ø 6–32 mm | 4 kW | 24 Month Warranty CNC-controlled rebar bending machine for medium to heavy-duty reinforcement steel processing. The GW45 is equipped with a large 360 mm turntable and is capable of bending rebar with diameters from 6 to 32 mm. Its compact and mobile design is ideal for both workshop and on-site applications. Key Specifications: • Rebar Diameter: 6–32 mm • Turntable Diameter: 360 mm • Motor Power: 4 kW Crodpey Swpgsfx Apbeh • Power Supply: 380 V • Machine Weight: 270 kg • Dimensions: 880 × 850 × 800 mm ✅ CNC control – programmable bending angles ✅ Large 360 mm turntable for heavy-duty rebar ✅ Compact & mobile – suitable for on-site applications ✅ All spare parts in stock – motor, bending discs, control electronics ✅ 12 months warranty ✅ CE certified | Technical support available

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Credpfxszzlc Re Apbeh Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Year of construction: 1995, condition: used, Wire diameter: 0.4-1.5mm, control: MCS SYSTEM V, an on-site inspection is possible. Codpfoz E Nrhex Apberh

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm Crodou Ibvujpfx Apboh square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: new, sheet width 2070 mm plate thickness 4 mm distance between columns 2100 mm diameter of upper rolls 140 mm Cedpfxsfv H A Us Apbsrh weight of the machine ca. 0,37 t