Used Uniflex-Hydraulik Gmbh Hydraulic Workshop Press for sale (81,755)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, stroke length: 1,500 mm, overall weight: 50,000 kg, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. Lrjdpfx Adewtbc Tstok The press is currently in Poland, 63-300 Pleszew, Poland. Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Lredpfx Adevvkmbstok

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole Lrjdpeyupulofx Adtok - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, type of input current: three-phase, table width: 805 mm, table length: 1,205 mm, oil tank capacity: 250 l, total length: 2,050 mm, total width: 1,410 mm, total height: 3,200 mm, overall weight: 8,000 kg, DGUV certified until: 08/2020, pressing speed: 11 mm/s, Equipment: documentation/manual, safety light barrier, For sale: fully operational and complete Ageo 160t hydraulic press. Full documentation and maintenance logbook are available. On-site inspection possible. VAT invoice provided. Ledoyxg D Hepfx Adtjrk

Condition: good (used), Year of construction: 1966, machine/vehicle number: 11473, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, stroke length: 150 mm, table width: 270 mm, table length: 3,000 mm, table height: 880 mm, distance table to ram: 1,500 mm, oil tank capacity: 150 l, total length: 1,300 mm, total width: 3,250 mm, total height: 2,160 mm, overall weight: 1,500 kg, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this quality Eitel straightening press / hydraulic press / shaft straightening press. -> Year of manufacture: 1966 -> Straightening force: 40 t, 4.0 kW -> Stroke: 150 mm, max. 1500 mm between centers -> Table: 270 x 3000 mm -> Carriage with centers and dial gauges, movable; centers are spring-loaded -> Straightening stroke adjustable on the shaft via handwheel; hand lever with cam control -> Straightening stroke range approx. 20 mm by turning the hand lever with cam Lrodpfjyzg Ttjx Adtek -> Precision straightening in hundredths of a millimeter possible -> Weight: approx. 1.5 t -> Height: approx. 2.10 m -> Original operating manual included -> Video available upon request The machine is in good condition and fully functional! If you have any questions or would like more information, feel free to send us a message or give us a call.

Condition: new, pressing force: 20 t, machine/vehicle number: DF0233, pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t Lredpfxsfxyi Ss Adtjk :5 Zoll

Condition: used, Year of construction: 2019, pressing force: 100 t, pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg Ledpfx Adjffamxotjrk :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

Condition: good (used), Hydraulic Punching Machine Type EHS, HE - Punching force approx. 12t (EHS-120) to approx. 20t (HE-20) - Power approx. 2.2kW / 3kW - Stroke approx. 100 mm - Two-hand safety control, alternatively foot switch Ljdpfx Aded A Tp Tstork Further hydraulic and pneumatic punching machines available in stock. Do you need the right punching tool? – Let us know. We will be happy to provide you with a suitable offer.

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 3,000 mm, control type: CNC control, Hydraulic 6-Axis CNC Press Brake Manufacturer: TRUMPF Model: Truma Bend V 230 Year of manufacture: 2001 Control: CNC Graphic Press force: 230 tons Bending length: 3060 mm Installation height, max. distance between lower edge of punch and upper edge of die holder: 535 mm Ram tilting: +/- 10 mm Clear gap between uprights: 2690 mm Throat depth: 410 mm Table width: 200 mm Working height with 100 mm usable tool height: 1050 mm Speeds: 200 mm/sec Y-Axis: Rapid traverse / Working stroke / Return X-Axis: 500 mm/sec R-Axis: 300 mm/sec Accuracy1 * Axis positioning deviation: Y-Axis: 0.01 mm X-Axis: 0.04 mm R-Axis: 0.08 mm Stroke Range / Backgauge travel: Y-Axis stroke: 365 mm X-Axis travel: 600 mm Max. backgauge range in X: 860 mm R-Axis travel: 250 mm Control: DA 65 Standard features Additional equipment Connected load: 38.5 kVA Electrical connection approx. Pneumatic connection: 6-7 bar Dimensions and weight: 3660 x 2310 mm (L x W) Required footprint (Length x Width) Height: 3059 mm Weight (approx.): 18,210 kg Equipment: Crowning via control Bending aids via control Lrjdjyw Ubwjpfx Adtjk Backgauge via control

Condition: used, functionality: fully functional, pressing force: 150 t, pressure: 250 bar, Double-column hydraulic press equipped with two side cylinders connected by a platen for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and fitting of the rotor shaft, as well as shaft removal during repair operations. Features a retractable table for stacking and handling rotors and stators. MAIN CYLINDERS 150 t - 2 hydraulic cylinders of 75 t each, with a stroke of 750 mm, joined by a slotted platen with a central bore of 250 mm diameter. - Maximum usable height between cylinder platens: 1,300 mm. - Minimum usable height between cylinder platens: 550 mm. EXTRACTION CYLINDER Lodexc Ekdopfx Adtork - 1 central cylinder of 80 t, with a 1,200 mm stroke. - Prepared to fit an extraction clamp; rod end threaded M 35 x 1.50 pitch, 40 mm length. - Maximum usable height of extraction cylinder: 1,300 mm to the root of the rod thread. - Minimum usable height of extraction cylinder: 100 mm to the root of the rod thread. TABLE AND STRUCTURE - Mechanically movable slotted table, 1,200 x 800 mm, with a 600 mm stroke, fitted with a worm gear reducer and 0.5 HP electric motor with brake. - Central bore on the table: 250 mm diameter; max. depth 550 mm. - Effective lifting capacity of the table for movement: 4 t. - Table traverse speed: 2,600 mm/min. - Internal front width: 1,250 mm. - Working height: 600 mm. HYDRAULIC POWER UNIT - Two-speed hydraulic unit, 5.5 HP, with automatic disengagement of rapid speed and independent speeds. Maximum pressure: 250 bar. - Digital control for maximum force during pre-pressing, pressing, and fitting; digital tonnage display. Pressure adjustment system via proportional valves. - Selector for approach and measuring speeds.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 50 t, table width: 700 mm, table length: 450 mm, total length: 1,160 mm, total width: 1,290 mm, total height: 2,085 mm, overall weight: 1,750 kg, pressure: 320 bar, working height: 850 mm, Equipment: documentation/manual, safety light barrier, The motorized hydraulic C-frame presses of the CM/NC series have four different powers ranging from 50 to 150 tons. Specially designed for stamping, die cutting, and forming work. The latest generation CM/NC series hydraulic presses have evolved into a versatility of uses, such as the possibility of incorporating these machines into automatic production lines. Model CM-50/NC Power 50 tn Motor power 5,5 kW Throat depth 265 mm Working speed 9,9 mm/s Approach speed 45 mm/s Return speed 60 mm/s Lsdpfxjwphvro Adtjrk Maximum pressure 320 bar Piston stroke 250 mm Lower table 700×450 mm Upper table 550×300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400- Pressure adjustment via rotary controlMotorized control via hand leverManually adjustable sliding cylinderClear opening: 1600 × 550 mmStar-delta connection for motor driveHydraulic tank incl. motor is mounted on the lower side of the frame Lrsdpoutuy Aofx Adtok Options / surcharges: Pressure control valve: ¤400.00 Speed throttle valve: ¤400.00 Anti-rotation device for piston: ¤250.00 Handwheel for sliding cylinder: ¤950.00 Cylinder adjustable via geared motor: ¤1,700.00 Table support plate (1300 × 850 × 150 mm): ¤3,300.00 All images are for illustrative purposes only and are symbolic photos. The actual equipment may vary slightly.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable - Can be operated electrically or manually - Pressure indicator - Emergency stop Lrodpfsgp Dc Rsx Adtjk - 400V

Condition: good (used), functionality: fully functional, pressing force: 160 t, table width: 1,250 mm, throat depth: 500 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Installation height max. 480 mm Lrodpfoyzcbasx Adtok Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools .

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: CE marking, documentation/manual, Capacity: 4050 mm x 175 Ton Lredpsyrdgqjfx Adtjk Distance between frames: 3600 mm Stroke: 265 mm Control: DURMA DT15 (3D Touch Screen) Serial No.: 73362219436 Dimensions: 5200 x 1900 mm Height: 2930 mm Weight: 12,750 kg

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? Lrjdpefxyh Refx Adtok :1200 ?

Condition: new, pressure 100 t stroke 400 mm 1010 mm 295 mm Heads 175x115 mm Lrodpfx Adeyv N Ngstok feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, pressure 20 t Lsdpfx Aoyv Nuvjdtork stroke 150 mm dayligth 700 mm 500 mm 195 mm weight of the machine ca. 200 kg Overall size 670x870x1900 mm Domestic equipments: - Stable welded construction - manually via hand lever - Pressure gauge via pressure gauge - CE mark

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec Lrodpsyv Nm Ssfx Adtek total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark

Condition: new, pressure 200 t stroke 400 mm cylinder diameter 170 mm work height max. 900 mm Front light range 1330 mm Lateral light range 450 mm total power requirement 7,5 kW weight of the machine ca. 2600 kg dimensions of the machine ca. 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable Ljdpfx Adjyv Nd Djtjrk - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: new, pressure 160 t stroke 400 mm 1100 mm 350 mm feed down 6,2 mm/sec Ljdpfjyv Ndqsx Adtsrk feed up 9,8 mm/sec total power requirement 6 kW weight of the machine ca. 1.300 kg dimensions of the machine ca. 1640x1000x2550 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: new, pressure 80 t stroke 400 mm 930 mm 295 mm total power requirement 4,0 kW 7,4 mm/s 11,5 mm/s Heads 160x95 mm Lrjdpfxjyv Nbcj Adtsk weight of the machine ca. 725 kg dimensions of the machine ca. 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ljdoyuttrepfx Adtjrk We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m Lredpfxeyfwvle Adtok with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation as is where is, WITHOUT additional work, free loaded to truck

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge - Adjustable stroke Ljdpoh Ramgjfx Adtsrk