Used Unitherm 1840 for sale (182)

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. Knodpfx Afezii Awowoa The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Tennant Type: T7+ ec-H2O™ Compact design with high maneuverability Item description: Clean hard floors comfortably, efficiently, and economically: with the battery-powered Tennant ride-on scrubber-dryer T7+. Thanks to its compact design, the ride-on machine is suitable for tight spaces and narrow aisles. The optional ec-H2O-NanoClean technology ensures reduced water and cleaning agent consumption. Compact design – ideal for aisles and elevators. Clear lines of sight and easy-to-use controls. Optimal water extraction – no cleaning agent residue. Optional ec-H2O-Clean technology for reduced cleaning agent consumption. Easy-to-clean, hygienic tanks. Low noise level of 67 dB(A). Automatic brake and parking brake. Available with various working widths. Includes battery, on-board charger, and brush. Technical details: Area of application: Indoor Operation: Battery Voltage: 24 V Battery type: Gel battery Battery capacity: 240 Ah/per unit Frequency: 50 - 60 Hz Travel speed: 6.4 km/h Direction of travel: Forward, Reverse Noise level in dB(A): 67 dB(A) Fresh/dirty water tank removable: No Tank volume fresh water: 110 l Tank volume dirty water: 110 l Theoretical area performance: 5120 m²/h Practical area performance: 5120 m²/h Working width: 800 mm Brush diameter: 400 mm Brush speed: 260 rpm Brush pressure: 36 - 73 kg Brush motor power: 450 W Brush-assisted drive: No Brush shut-off: Automatic, Yes Tire material: Rubber Number of wheels: 3 Wheels leave no marks: Yes Wheel width: 80 mm Wheel diameter: 250 mm Turning radius: 1840 mm Operator cockpit: Yes Squeegee blade material: Linatex Squeegee width: 1000 mm Vacuum motor power: 450 W Body color: Teal Frame color: Teal Height: 1270 mm Width: 740 mm Depth: 1270 mm Weight: 443 kg Version with ec-H2O™ Rim material: Polyamide Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Knjdpjziiu Hsfx Afwsa We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Technical data: Knodpfxeq R T U Dj Afwsa - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW - Table height mm - Space requirement incl. back gauge, without front support arms, without safety guard - approx. W 3800 x H 1840 x D 2350 mm - Weight approx. 7500 kg

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m Kodpjy Sxvhsfx Afwona FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 7000/1500/H735 mm -Load capacity: 15 t Knsdpfxjyg Nptj Afwea -Tires: Solid rubber dual tires, 4 pieces, 425/150-305, see photos -Overall dimensions: 8570/1500/H735 mm -Transport dimensions: 7000/1500/H735 mm -Weight: 1840 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: SBA, transformer type ETK 168-0110 Knjdpfjh Hrtyjx Afwsa -Power: 1840/4340VA -Technical data: see type plate -Dimensions: 175/165/H150 mm -Weight: 20.3 kg

Condition: excellent (used), Heraeus Vötsch Climate Chamber Here, we offer a Heraeus Vötsch climate chamber. Vötsch Climate Chamber VCS 7033, Water-Cooled Temperature range: -70°C to +180°C Temperature change rate: Heating: 7.5 K/min Cooling: 6.5 K/min Humidity range: 10% to 98% RH Temperature deviation (temporal): ± 0.5 K Temperature deviation (spatial): ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm Side feed-through: 90 mm diameter Approx. 330 L, Weight: 600 kg Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW Rated current: 17 A Refrigerant: R404A / R23 Type: VCS 7033 For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements Knodpfx Afjzfy Rqewea 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, Stream Classic Range Electric power Maximum temperature 300 °C Electric power 52 + 2.5 kW Heaters with front access Capacity 18 trays Tray format 60x80 cm Baking area 8.6 m² Rotation diameter 1020 mm External dimensions 1700 x 1840 x 2700 mm Overall dimensions with door open C 2350 mm Rotation by hook Suspended trolley Standard steam generation with XL iron bars Front water outlet Rear outlet on request Manual steam vent Stainless steel cladding Digital control panel with 99 programs Door opens to the right Double-glazed, full-view door Ksdpfjzk Hb Tox Afwjna Reinforced steam generation with cast iron balls (optional) Programmable automatic steam vent (optional) Drip tray hood (optional) Rotating tray 600 kg (optional) RC3 or MARCONI touchscreen (optional) Key benefits Electric rotary oven for a trolley with 18 trays of 60 x 80 cm. Baking area of 8.6 m², suitable for regular professional baking. Electric power of 52 + 2.5 kW. Maximum baking temperature of 300 °C. Rotation system by hook with suspended trolley. Digital control panel with 99 programs, multi-phase management and programmable weekly start. Detailed technical specifications Reference LFRNKE - 6080 Range Stream Classic Oven type Professional electric rotary oven Application Baking bread, pastries, fresh or frozen dough Capacity 18 trays Tray format 60 x 80 cm Baking area 8.6 m² Rotation diameter 102 cm External dimensions A 170 cm, B 154 + 30 cm, C 235 cm, H + H1 230 + 40 cm Maximum temperature 300 °C Power Electric Heating system Electric heaters with front access Electric power 52 + 2.5 kW Rotation system By hook, suspended trolley Cladding Entirely in stainless steel Baking chamber Heavy-gauge stainless steel with stainless steel base and trolley extraction slide Door Opens to the right, double-glazed, full-view, classic LF handle Steam generator Standard with XL iron bars Water outlet Front, or rear on request Steam extraction Manual, optional programmable automatic Control panel Digital with 99 programs, multi-phase management and weekly start programmer Optional controls Electromechanical panel or touchscreen End-of-baking safety Flashing light and buzzer with digital or touchscreen panel Delivery Oven delivered unassembled or fully assembled (optional)

Year of construction: 2015, condition: used, functionality: fully functional, Epilog Fusion 40 / 120 Watt, laser engraving and laser cutting system - 120 Watt CO2 "WaveGuide" laser source, according to the last service on August 5th, 2024, laser power 132 Watt - Working area 1016X711mm - 2" focus lens - Drive: brushless DC servo motors for crystal-clear cutting edges in acrylic glass - Max. material thickness 362mm - Max. weight of workpiece: 91kg - Laser safety class 2 - Interface: Ethernet, freely programmable IP address - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, machine LED lighting - Large format viewing window made of safety glass - Laser beam expansion, base frame on castors - Honeycomb cutting table - Round engraving unit for cylindrical objects with roller system Extraction: vacair UML 1350 extraction system - Recirculation system with 3 levels -Filter - Filter: particle filter HEPA H14, pre-filter cassette - Activated carbon cassette 43kg (with HEPA) - Fan output 1350 m³/h - Pressure 10,000 Pa - Separation level >99% - Suction/exhaust air nozzle DM 125mm Ksdevvha Sspfx Afwjna - - Sale only to traders - Exclusion of any guarantee or warranty claims - Sale with invoice and VAT - No liability for spelling errors, typos - Sale as seen, later complaints excluded Machine in very good condition, few operating hours - Machine is very well maintained and clean New prices: Round engraving unit, built in 2019, €1840/net Laser Fusion 40 /120 watts, built in 2015, €55,000/net Vacair UML 1350 extraction system, built in 2021, €5,450/net Total: €62,300/net

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 468-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 83 mm Shot weight: 2043 g Injection pressure: 1840 bar Dosing volume: 2245 ccm Kjdozpamtepfx Afwjna Clamping unit: Clamping force: 468 t Tie bar spacing: 830x830 mm Platen size: 1210x1165 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety guard Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 19800 kg Length/Width/Height: 8.80x2.00x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm Kodpsyvvq Dofx Afwsna throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank Kodpfx Asrh E Dqofwjna The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: excellent (used), Year of construction: 2011, Stork S+ 6600-5650 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2011 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial environment. Kodpfoxyqyfex Afwena Clamping Unit Clamping force: 6600 kN Platen dimensions (H × W): 1370 × 1370 mm Tie-bar spacing (H × W): 900 × 900 mm Min. / Max. mould height: 300 – 900 mm Maximum opening stroke: 1840 mm Locating ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2575 cm³ Shot weight (PS): 2369 g Injection pressure: 1650 bar Maximum injection speed: 500 mm/s Additional Equipment Pneumatic valves – 6 pcs. Core – 1 pc. The machine is available for inspection and testing under power. Photos and operational videos available upon request. We provide assistance with loading and transport arrangement.

Condition: used, - Model electron 602- 3- 184 Knjdpfx Aowxmr Rofwoa - Brand BONGARD -Dimensions (LxWxH): 2040 x 3460 x 2300 mm -Opening size (LxW): 602 x 1840 mm -With column elevator -Electrical connection power: 27 kW - Voltage: 380 V / 50 Hz - Year of manufacture: 2000 - Front with hood and stainless steel electric heating elements - Treated glazing to reduce heat loss

Year of construction: 2023, condition: excellent (used), For sale: Friul Co C3 Dough Mixer and Kneader – 2023 model, like new We are selling a Friul Co C3 industrial dough mixer and kneader in excellent technical and cosmetic condition. This machine is ideal for bakeries, pizzerias, pasta factories, and artisanal bakeries where fast, consistent, and reliable dough processing is essential. Technical specifications: Manufacturer: Friul Co Srl (Italy) Model: C3 Year of manufacture: 2023 Power supply: 230 V Power: 1840 W Single-phase version IP54 protection Stainless steel construction Movable, lockable wheels Key benefits: ✅ Mixing and kneading in one machine ✅ Consistent dough processing, excellent end result ✅ Easy to operate and clean ✅ Robust, industrial design ✅ Reliable Italian manufacturing ✅ 2023 model, modern design The machine is perfectly suited for processing bread, pastry, pizza, and other yeast-leavened doughs. The automatic operation significantly reduces the need for manual labor and increases productivity. The machine is in like-new condition (approximately 5 hours of use). Kedpfxjzrnd Ej Afwsna For more information or to schedule an appointment, please do not hesitate to contact us!

Condition: used, This listing is for a Liebherr Hausgerate SN-ST 3910 Refrigerator The unit is in full working condition and is ready for immediate release The Liebherr LKv 3910 MediLine is a laboratory refrigerator designed to meet the stringent requirements of pharmaceutical and laboratory environments. It ensures efficient, Pharmacopoeia-compliant storage with precise temperature control and robust safety features. Key Features: Precise Temperature Control: The electronic controller with a digital display allows temperature adjustments between +3°C and +16°C, accurate to 0.1°C. Temperature Monitoring: The digital display continuously monitors internal temperatures, triggering visual and audible alarms for persistent over- or under-temperature conditions. The system records the last three alarms for review. Construction: The exterior is made of white painted steel, while the internal compartment is constructed from polystyrene (PS), ensuring durability and ease of cleaning. Safety Features: A power failure warning light, temperature calibration capabilities, and a safety thermostat to prevent freezing enhance the reliability of the unit. Technical Specifications: Capacity: Gross/Net: 360 liters. Dimensions: Exterior (W x D x H): 600 x 620 x 1840 mm. Interior (W x D x H): 440 x 440 x 1630 mm. Shelving: Equipped with 5 adjustable shelves. Cooling System: Features an internal fan for uniform temperature distribution. Control Panel: Digital display for easy monitoring and adjustments. Alarms: Open door alarm. Visual and acoustic alarms for minimum and maximum temperature deviations. Adjustable alarm settings. Connectivity: Includes a dry contact and RS 485 interface for data monitoring and integration. Defrost: Automatic defrosting mechanism. Additional Features: Porthole for PT 100 sensor insertion. Insulation: 40 mm thickness for energy efficiency. Noise Level: Operates at 48 dB. Ksdsxwcz Nepfx Afwsna Climate Class: SN-ST, suitable for ambient temperatures up to 43°C. Energy Consumption: 0.865 kWh/24h. Electrical Specifications: 220 - 240 V / 50 Hz with a connection rating of 1.5 A. Weight: 68 kg.

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm Kodpfx Asyvvmrjfwena feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: used, Year of construction: 2026, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Ksdpfx Aezqr Ekefwsna Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder PLEASE NOTE! This machine is a returned item with damaged packaging. NO WARRANTY!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 385 kg, total width: 960 mm, total length: 950 mm, input frequency: 50 Hz, electrical fuse: 16 A, Hub kneader Kemper F 75 SL Dough kneader with 2 speeds Flour dust cover Stainless steel bowl and kneading arm Mobile machine DGUV V3 safety tested exclusively by us Connection: 400V, 16A CEE plug Dimensions: 960 x 950 x 900/1840 mm (W x D x H) Used machine Kedsy Srtaopfx Afwena

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 385 kg, total width: 960 mm, total length: 950 mm, input frequency: 50 Hz, electrical fuse: 16 A, Kemper F 70 S Lifting Mixer Dough Mixer Kemper Model: F 70 S 2 speeds Ksdpfxey Srr Ns Afwona Lifting mixer with flour dust hood Mobile machine Connection: 400V, 16A CEE plug Dimensions: 960 x 950 x 900/1840 mm (W x D x H) Used machine

Condition: used, mileage: 163,075 km, power: 162 kW (220.26 HP), first registration: 01/1998, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro2, loading space volume: 6 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, all wheel drive, crane, parking heater, * ABS * Analog tachograph * Mirror heating * Roof hatch * Rear window * Driver comfort seat * Seat heating * Front axle differential lock * Rear axle differential lock * Transfer case * Off-road reduction gear * Air dryer Ksdpfx Ajylra Sjfwona * Trailer coupling * 2-line air connection * Duomatic air connection * Ball-type coupling * Auxiliary heater * Front axle engageable * Exhaust behind cab * Electrically adjustable mirrors * 6-speed * Suspension: leaf springs * Payload: 1840 * Continuous brake: engine brake ----Special body: Crane: Atlas AK 60.1, folding, radio remote control + ground control, 1 hydraulic + 3 manual extensions (working height approx. 12.3 m). Load chart readings: lifts 3.1t @ 1.9m, 1.76t @ 3.5m, 1.22t @ 4.9m, 0.93t @ 6.4m, 0.60t @ 7.9m, 0.40t @ 9.3m. ----Body: Flatbed platform, reinforced front wall, hardwood floor, lashing rings, extendable center and rear stanchions. ----Rotzler front winch type Treibmatic TR 030, remote cable control, pulling force 50 kN, 190 bar, rope diameter 13 mm, rope length 60 m, max. rope speed 30 m/min. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION GIVEN WITHOUT WARRANTY, INCL. EQUIPMENT & ACCESSORIES. All contracts, invoices, proforma invoices, orders, and sales negotiations are based on our general terms and conditions (see legal notice/imprint).

Condition: used, mileage: 1,001 km, first registration: 01/2016, overall weight: 11,500 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2016, Vehicle location: Bovenden, steel body, lashing eyes, swing tailgates Knedpfoyxhbmex Afwea Body: Meiller 3-way tipper body approx. 7m³, dismantled from DAIMLER-BENZ Arocs 1840 K 4x2 with 3900mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, mileage: 349,050 km, power: 213 kW (289.60 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 11,200 kg, maximum load weight: 6,800 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 4,725 mm, next inspection (TÜV): 08/2025, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, loading space length: 4,700 mm, loading space width: 2,340 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden. Steel body, 1x air-suspended driver's seat, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, AS-Tronic automatic transmission, lifting/lowering function, differential lock, fog lights, work lights, storage box, air suspension, trailer coupling with air, light and hydraulic connections, low-noise G1, lashing eyes, underrun protection, side aluminum underride protection, swing flaps, crane mounted behind cab, emergency stop, grab controller, foldable, 2-point hydraulic outriggers, radio remote control, 3x hydraulic extensions, green environmental sticker. Wheelbase: 4725 mm. Body: Dautel 3-way tipper body with Hiab XS111 ES-3 HiDuo crane with remote control (radio remote). EEV engine! Loading height approx. 1420 mm! Kjdpfev Su H Rex Afwena Load diagram: 4m - 2660 kg, 5.6m - 1840 kg, 7.5m - 1320 kg, 9.5m - 1040 kg. Grab bucket available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Kodpfx Afey S Auzswjna Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED - Thread cutting device - Coolant device B Available immediately from stock

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Ksdpfoy S Auusx Afwsna Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.