Used Van Hool Semi Low-Loader for sale (26,587)

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Credpfxjzlmkwe Apbjh Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: used, empty load weight: 9,290 kg, maximum load weight: 32,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2017, next inspection (TÜV): 07/2027, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, car registration, compressed air brake, 2 pairs of wheel recesses, lashing eyes, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Crodez Izhmjpfx Apbsh

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Crsdpfxjz Dmn Re Apbsh Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, Year of construction: 2005, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, 2005 VAN HOOL 20FT SWAP BODY tank container 34,600L / 1-component / 4 baffles UN PORTABLE T11 steam heating bottom discharge EMKD valid for 5 years + CSC inspection until 08-2028 = Further information = General information Year of manufacture: May 2005 Model year: 2005 Usable material: Chemicals Weights Empty weight: 4,475 kg Payload: 31,525 kg GVW: 36,000 kg Functional Codpfx Apoz D Umhjbjrh Load compartment volume: 25,000 l Body brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Overall condition: average Technical condition: average Optical condition: average Further information Please contact Arne Honingh for further information.

Condition: used, empty load weight: 9,000 kg, maximum load weight: 25,500 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 01/1977, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 12,500 mm, total width: 2,500 mm, total height: 1,750 mm, suspension: steel, tire size: 8.25 R 15/18 PR, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, leaf spring suspension, forced steering, loading ramps can be attached. Crjdpei Rqwfefx Apbsh Superstructure: Saddle height approx. 1,250 mm, both axles with forced steering, gooseneck 4,100 mm, turning radius from corner/diagonal to kingpin center 1,800 mm, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, axle configuration: 3 axles, Year of construction: 2026, We have all Europe documents!   Crsdpfx Aeqx Nfgjpbsh    We can delivery the trailers with FOB-EXW-CPT-CFR-CIF      If you have an interest please contact with us 

Condition: used, empty load weight: 9,520 kg, maximum load weight: 38,480 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2020, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Credpfx Asz H T Rdjpbjh

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin Credpfx Apozlwm Ajbeh * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: used, maximum load weight: 78,380 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 06/2023, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. This is an excerpt of the equipment. Complete equipment list available upon request. Equipment: - 2-inch pintle hook - 12 t Broshuis SL axles - Extendable widening elements - 4 pairs of lashing eyes on the central beam, 10,000 daN - 1 in the fixed section before the telescoping section - 3 pairs behind the telescoping section - 9 pairs of lashing eyes in the outer frame, 10,000 daN - Holes in the outer frame for attaching lashing straps - Jost 2-speed geared support winch - 4 pcs. illuminated, extendable widening panels - 3 pcs. plug-in sideboards on the gooseneck (length approx. 2,400 mm) - Rear corner posts plug-in / removable - 4 pcs. chock blocks with holder under the loading platform at the support legs - 1 pair of lashing eyes in the outer frame of the gooseneck, 10,000 daN - 3 pairs of lashing eyes in the outer frame of the gooseneck, 5,000 daN - NATO socket - NATO coiled cable - 2 x 7-pole electrical system - 1 x 7-pole EBS - 1 socket at the front and rear for auxiliary steering - 1 storage box on the gooseneck across the entire width with angled corners (45°) - Opening from above - Doors in the corners lockable (not continuous to the storage box in the middle) - 6 pcs. plug-in corner posts, approx. 1,200 mm high, including holder on the gooseneck - WADER container pockets for 1 x 20 ft and 1 x 40 ft Crodsz Ifk Eopfx Apbsh - Brake connections, red / yellow - EBS WABCO - Rear outriggers, telescoping - 2 LED reversing lights at the rear - LED lighting (DK round) - 1 LED rotating beacon - 8 pairs of corner post pockets in the outer frame of the loading platform - 3 pairs of corner post pockets in the outer frame of the gooseneck - Contour marking, yellow on the sides / red at the rear - Adjustable attachment rails for loading ramps - 3 LED warning lights at the rear of the vehicle - RAL 3002 carmine red - 2 ECE plates at the rear

Condition: new, Year of construction: 2026, GVN Trailer 4 Axle Exclusive Lowbed        Cjdoqxbfmopfx Apberh Please get contact with us for more informaiton;    

Condition: new, Year of construction: 2026, GVN Trailer 4 Axle Extendable Lowbed     Csdpfx Ajqxq Aiepberh      Please get contact with us for more informaiton      

Condition: used, empty load weight: 16,200 kg, maximum load weight: 48,050 kg, overall weight: 64,250 kg, axle configuration: > 3 axles, first registration: 08/1976, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total length: 13,100 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, Kässbohrer axles, leaf suspension, forced steering, lashing rings, 2-piece loading ramps, front support. Crsdpfjxyzyijx Apboh Bodywork: 750 mm ramp width, fifth wheel height 1550 mm, king pin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, overall length 13,100 mm. ACCESSORY DETAILS WITHOUT WARRANTY, subject to modifications, intermediate sale and errors excepted!

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 Crodjyhkqnopfx Apboh * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. Crsdpfezu Ebtsx Apbeh 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: used, maximum load weight: 26,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese Mega curtain-side trailer with Dhollandia ramp 9t * Dhollandia tail lift with ramp function Credpfx Apjyrkprsbjh * Type DHLSU.90, lifting capacity 9,000 kg, load centre 1,000 mm, supports * Remote control * SAF axles with air suspension and disc brakes * 1st axle liftable * Stainless steel toolboxes * Tyres 435/50R19.5 For further information, we are at your disposal

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from Cjdpfoz Dmnwjx Apberh

Condition: new, overall weight: 58,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, OTHER GÜVEN LOWBED TRAILER? 4 AXLES? HYDRAULIC RAMPS? STEERABLE AXLE? OVERWIDTH DEVICE?----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERABLE AXLE? HYDRAULIC RAMPS? MOVABLE RAMPS? OVERWIDTH? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER, OUR OWN PRODUCTION FROM TURKEY * 4 AXLES * AXLE DESIGN * TRI-AXLE * THIRD AXLE WITH STEERABLE AXLE * WITH LIFT AXLE * OSMAN KOÇ AXLES * DRUM BRAKE * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOWBED, 6 M LONG * KING PIN ADJUSTABLE AND 22 T DIMENSIONS * FROM RAMPS TO KING PIN (CLOSED): 9.40 M * FROM RAMPS TO KING PIN: 12.10 M * EXTENDED TOTAL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY MOVABLE TO THE LEFT AND RIGHT EQUIPMENT * AIR SUSPENSION * LOAD SECURING LASHING POINTS * OVERWIDTH PREPARATION * TOOL BOX TIRES * TIRE SIZE: 235/75 R17.5 * DUAL TIRES WEIGHTS * EMPTY WEIGHT: 12,500 KG * PERMISSIBLE TOTAL WEIGHT: 68,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICAL PERMISSIBLE TOTAL WEIGHT: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY PRODUCED DESCRIPTION GVN TRI-AXLE LOWBED TRAILER WITH LIFT AXLE AND STEERABLE AXLE (3RD AXLE), AIR SUSPENSION AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KING PIN. HYDRAULIC, SWIVELING RAMPS, AS WELL AS OVERWIDTH PREPARATION AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY LOAD TRANSPORTS.----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least 500.00 EUR / 1,000.00 EUR will be charged. Subject to change, errors and prior sale! You can find more vehicles on our website: Crodpfx Apoymu Nxjbjh Sales are exclusively subject to our general terms and conditions - see website. Important note - Important information: Despite careful verification of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total length: 13,100 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Csdswh Uipepfx Apborh

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Csdpfx Apjizu Ntjbjrh Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: used, maximum load weight: 38,170 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,085 mm, loading space width: 2,550 mm, total length: 13,300 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2015, Equipment: ABS, ES-GE 3-Axle Lowboy Semi-Trailer | Extendable | Wheel Recesses | Aluminum Ramps | Lift/Steering Axle Description: For sale is a high-quality and extremely versatile ES-GE 3-axle lowboy semi-trailer from the initial registration year. The vehicle stands out due to its extensive special equipment, which enables maximum flexibility in the transport of heavy construction machinery, wheel loaders, excavators, and containers. Thanks to the extendable loading platform and the integrated wheel and excavator recesses, the semi-trailer is equipped for virtually any challenge. Vehicle Data & Weights: First Registration: 08/21/2015 * Permissible Total Weight: 48,000 kg * Axle Load: 30,000 kg (3 x 10,000 kg) * Fifth Wheel Load: 18,000 kg * Fifth Wheel Height: 0.95m Dimensions & Chassis: Overall Length: approx. 13,085 mm (extendable by max. approx. 4,060 mm) * Loading Platform Length / Height: approx. 8,750 mm / approx. 860 mm (loaded) * Width: approx. 2,550 mm (extendable by means of galvanized brackets to approx. 3,000 mm) * Chassis: High-strength fine-grained steel (suitable for point load 30 t on 4 m) * Floor: Robust hardwood floor (approx. 38 mm), checkered plate covering above the axle assembly * Paintwork: Solid color in RAL 5010 Blue, rims in silver Suspension & Axles: Axles: 3 x 10,500 kg Gigant axles, air-suspended with lifting and lowering function * 1st Axle: Designed as a lift axle * 3rd Axle: Designed as a trailing steering axle * Braking System: Two-line braking system (ABS-EBS), Knorr brake TIMG2 (Smart-Board) * Tires: 12-ply, 235/75 R 17.5 * Tire Tread Depth: 1=80% 2=60-80% 3=30-60% Csdpoz Edhqsfx Apbsrh Special Equipment & Highlights: Ramps: 1 pair of 2-piece aluminum ramps (approx. 2,900 + 1,450 x 600 mm), hydraulically liftable and lowerable, mechanically movable (load capacity approx. 15,000 kg/piece) * Wheel Recesses: 2 pairs of wheel recesses in the lowbed including matching aluminum covers * Excavator Recess: Integrated excavator recess at the rear between the axles (approx. 650 x 2,000 x 300 mm) * Container Locking: 2 pairs in the loading platform (for 2x 20' and 1x 40' containers), 1 pair on the gooseneck, and 1 support leg for the front wheel recess * Weight Optimization: Front supports and air tank made of lightweight aluminum instead of steel * Load Securing: 9 pairs of stake pockets in the outer frame, 1 row of stake pockets transversely on the gooseneck, numerous swivel lashing points (6 t WLL / 12 t LC) * Lighting & Safety: LED taillights, LED side marker lights, 2 LED reversing lights, 4 retractable LED widening lights (up to approx. 4,500 mm width) incl. night parking signs * Corrosion Protection: High-quality treatment with zinc dust primer (90%) according to DIN/ISO 12944 * Pneumatics: Couplings in comfortable "DUOMATIC" design The vehicle is in an operational condition. Sale is from the location. For further questions, detailed pictures or to arrange a viewing appointment, please do not hesitate to contact us! New main inspections / safety checks or weight reductions/increases are possible upon request. We will be happy to assist you in obtaining export/transfer license plates; a transfer of your purchased vehicles within the Federal Republic is also possible. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Than

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: ABS, EBS, 2+1 Axle Platform Trailer Crjdpfx Asyaxthopbsh

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve Crjdsyhkquopfx Apbsh - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Saddle load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3750 mm Saddle height loaded: 1200 mm Rear overhang: 2300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Frame length: 2,600 mm Loading height, rear frame at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle track: 1360 mm Overall width: 2,540 mm Total weight depends on the saddle load. Low-bed: Low-bed with external, extendable beams. "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking mechanism. The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of lashing rings, foldable outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear frame: Rear frame with closed outer frame, diamond-plate flooring and continuous prism-shaped excavator well, approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). 1 pair of lashing rings lying in the well (LC 8,000 daN + 5,300 daN). 2 pairs of stake pockets for stake pockets 100 x 50 mm in the outer frame. Gooseneck: Gooseneck in SNT design for optimizing the loading area length, length approx. 3,785 mm. Gooseneck hydraulically adjustable up/down and extendable. Technical saddle load: 23,000 kg For semi-trailer tractor: 4x2, 6x2 and 6x4 PENDULUM AXLE: "PENDULUM AXLE", all axles hydro-mechanically forced steered. Hose burst valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and quick-release coupling for securing in the raised position. Final coating of the axles with 2 layers of 2-component paint, solid color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle equalization. Axle tool. Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor. Electrical system: Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (Yield strength 355MPa) S690QL/S700MC (Yield strength 690MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat, solid color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (Pure White). Metallic paint not possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's option. Load index (146/146F) Preparation for mounting screwable container positioning for 1 x 20' or 1 x 40' container on the outer beams. Without container locking mechanisms. i i2" Kingpin iA galvanized steel front wall, approx. 400 mm high. iA spare wheel with holder in front of the front wall. i2 pieces of wheel chocks with holder on the front wall. iYellow-red air couplings on the galvanized front connection bar. Steering from the front and rear by means of a cable remote control via push buttons, with single-axle control. (without installation in the semi-trailer tractor) i Codpfx Asizu Nwopberh Hydrauli

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body Csdpfx Asi Rqirepborh Body: Aluminum wheel well, floor length 1,800 mm per well, load capacity 6,200 kg, package price. ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, overall weight: 6,200 kg, first registration: 01/2005, Year of construction: 2005, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body. Body: Aluminum wheel well, floor length 1,350 mm per well, load capacity 6,200 kg. Package price. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Cjdpfx Aei Rqinopbsrh