Used Zopf Profile Bending Machine for sale (67,350)

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Dcsdszgci Eepfx Amgoi Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Djdszh I Iiepfx Amgoci Additional videos and detailed images of the system are available on request!

Condition: excellent (used), Schlebach PMC 30/80 RS Dodpfxszivgio Amgjci Immediately available, no delivery time. Standard machine for the production of 25 mm double standing seam profiles from cut sheets or sheet material. The machine is equipped with: ✅ Profiling rollers for 25 mm seam height ✅ Rollers including transport handles for easy transport ✅ Clip relief (extra rib for adhesion) ✅ An RS slitting shear for cross-cutting before profiling ✅ Bending capacity: 0.8 mm (zinc, aluminum & copper), 0.7 mm steel sheet Condition: • Very good technical condition • Very good optical condition • Weight: approx. 560 kg An inspection and test run are possible by arrangement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 4350, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, sheet thickness (max.): 20 mm, overall weight: 14,200 kg, working length: 2,000 mm, TECHNICAL DETAILS Dsdpfx Amozi D Saogjci Bending length: 2,000 mm Max. sheet thickness: 20 mm Bending capacity: 15/11 mm Bottom roller diameter: 280 mm Top roller diameter: 300 mm MACHINE DETAILS Drive power, main drive: 16.2 kW Drive power, top roller drive: 4.8 kW Drive power, bottom roller drive: 3.7 kW Weight: 14,200 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Dsdpszdfb Tsfx Amgsci Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units EQUIPMENT Documentation CE marking

Year of construction: 2009, condition: excellent (used), Elumatec SBZ 140, extended version: 7.6 meters Weight approximately 5000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety guard Light curtains Automatic clamping detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer. Max. milling diameter: 80 mm Max. sawing diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, -90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (in many configurations) Control: 4-axis CNC system, with PC control, color screen, USB & network. Software: eluCam. Automatic material clamping, automatic positioning via indexing pins Pendulum/shuttle operation (two work zones), which improves production cycle time. In addition to milling and drilling, it can also tap, saw, and perform profile machining – all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend that you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT is reclaimable for businesses). Djdjzhg S Tspfx Amgjci

Condition: excellent (used), Number of spindles 3 St. Number of tools 8 St. Spindle diameter 50 mm Dimensions (L/W/H) 4250x1850x2300 mm # 6988 Weinig Univar 6 CNC ..... Technical details summary (please ask for possibly more included equpment) ..... 1st profiling spindle: ..... > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: ..... ..... > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, CNC Dcjdpfx Ameymf Ekjgoi > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 3rd profiling spindle: ..... > position: vertical right > length of spindle: 160 mm > number of revolutions: 5850 rpm > spindle diameter: 40 mm > tool diameter max.: 210 mm > engine: 3 kW More features: ..... > possible to work online: > monitor control: > Equipment for profiling small sashes: min. 500 mm > Control: PC-Nexus If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you! Technical details according to manufacturer - without guarantee!

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Dcjdozgf Rxspfx Amgoi Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, sheet width 1050 mm Dcjdpfozfayfsx Amgsi plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: used, machine/vehicle number: 960350, The surcharge requires approval!!! Dcsdpfezixxusx Amgji

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 1.5 mm steel Dsdszfk Rnepfx Amgsci Roller diameter: 65 mm Right and left rotation via foot switch Safety rope pull switch

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V Dedpfx Amszc Rv Tsgeci total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Dsdew I Unkepfx Amgsci Location: Röllbach

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: Dsdpfxeu Ibuko Amgjci - div. single and add-on parts *

Condition: used, functionality: unexamined, Year of construction: 2020, operating hours: 6,943 h, Tube Bender 25 Machine Data Designation: Tubobend 25 Operating Hours: 6493 h Weight: approx. 650 kg Dimensions: approx. 2600 × 1000 × 1200 mm Dodpfxjzkgrfo Amgjci Performance Data Connected Load: 1.4 kW Bending Data Bending Capacity (Mild Steel): Ø 25.0 × 3.0 mm Max. Bending Radius: 75 mm Max. Bending Speed: 58 °/s Bending Accuracy: ± 0.2°

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Dsdpfx Amszka H Aogoci

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Dcjdpfx Aszka Nwemgei

Condition: new, Top and bottom blades removable in segments Dcedoga T Daepfx Amgsi PNEUMATIC CYLINDER!!! Including manual back gauge Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 590 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Finger bending machine with a segmented top clamp Including a manual back stop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Djdega T Dhepfx Amgoci Max. working length ----- 1270 mm Max. opening width ----- 45 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 Weight ----- 360 KG Width ----- 1620 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, engine 2,8 KW weight of the machine ca. 320 kg Dodpjy H N Nzefx Amgoci dimensions of the machine ca. 86 x 90 x 85 cm

Condition: new, sheet width 1550 mm Dodpfx Amsyvvrhsgjci plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW Dcsdpfxeyvvnis Amgei weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, Year of construction: 2019, sheet width 1050 mm Dcsdpfx Ajzh N Uwsmgoi plate thickness 4,0 mm roll diameter 110 mm total power requirement 2,2 kw

Condition: used, functionality: fully functional, Pipe bending machine Manufacturer: Ercolina, Type: Top-Bender Technical data Djdpfezdf N Rsx Amgsci Manufacturer: Ercolina Type: TOP-BENDER Year of manufacture: unknown Bending capacity: Ø 64 x 4 mm Bending angle: 180° Weight: 135 kg Accessories - Blue tooling o R90 d42-1-1/4 o R67 d 1“ o R100 d1-1/2“ - Copper tooling o 1 1/4“ (2x) o 1 1/2“ (2x) o 1“ (2x) All information without guarantee. A demonstration with the machine running can be arranged at any time in our showroom.

Condition: new, pressure 28 t piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg Dedpfxjqzmgqs Amgsci dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.