Used 18.5 Kw Screwcompressor for sale (32,473)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, For sale is a complete Bollegraaf baling system consisting of conveyor technology, baling press and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Cjdpozbxw Ajfx An Nsgu Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. Cgodpfx Aevf E Avon Nou We accept no liability for the technical specifications or any errors.

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan Cgjdpjylhwgofx An Nou -Manufacturer: Dunli, axial fan -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm -Voltage: 380 volts -Fan wheel: Ø 630 mm / see photos Quantity: 1 piece available -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: VEM, electric motor type KR 112, 1/4 -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP 44 Cgodpezbr R Ajfx An Neu -Dimensions: 360/248/H255 mm -Weight: 37 kg

Condition: used, mileage: 185,000 km, power: 125 kW (169.95 HP), first registration: 04/2017, fuel type: diesel, overall weight: 2,900 kg, next inspection (TÜV): 04/2026, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: air conditioning, central locking, navigation system, soot filter, Ford Transit Custom Double Cab 2x sliding doors 125 kW automatic alloy wheels front and rear parking sensors mobile phone preparation cruise control multifunction steering wheel navigation radio CD 230V socket electric windows electric seats air conditioning artificial leather seats Csdpfjza S T Ijx An Njgu The vehicle is in good condition! Ford service book, last inspection at 169,778 km 2 keys

Condition: good (used), Year of construction: 1982, Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm Cjdpezbrx Hefx An Negu -Weight: 1698 kg

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet Cjdpfx Ajryalbsn Negu -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 mm -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower Cedpfx Aeyh Hiwjn Nogu -Manufacturer: Siemens, side channel blower, side channel compressor -Type: Elmo-G 2BH1 807-1AC17 -Drive: 5.50 kW -Speed: 2920 rpm -Dimensions: 680/500/H520 mm -Weight: 122 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Motovario worm gear type NMRV/030 -Speed: 17 rpm i 080.0 -Engine: Neri Motori type T5034 -Power: 0.06 kW -Hollow shaft: Ø 14 x 63 mm -Protection rating: IP55 Cgsdszbqqnopfx An Neu -Dimensions: 235/100/H130 mm -Weight: 3.5 kg

Condition: good (used), Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Voltage: see nameplate -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Design: B3 -Dimensions: 360/270/H205 mm Cgjded Tgapepfx An Nju -Weight: 30 kg

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece Cgjdpjzbk Tiofx An Nsu -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available Cgedpfx Anjzbk Iyj Neu -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: RGM-Ruhrgetriebe, geared motor, angle geared motor -Speed: 55 rpm -Type: GC 57/30-SN5 -Voltage: 180/200V 3000rpm -Transmission: Z9 5FRG i= 55 Cjdpjzbignofx An Negu -Shaft: Ø 12 x 30 mm -Quantity: 1x geared motor available -Dimensions: 285/190/H120 mm -Weight: 4.9 kg

Condition: good (used), Three-phase motor, electric motor Cgjdpfx Anozbif Ro Neu -Manufacturer: Siemens-Schuckertwerke, electric motor type OR624-4 -Power: 3.0 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: P33 -Dimensions: 370/290/H250 mm -Weight: 40 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir Codpfxozbhdle An Njgu -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg

Condition: good (used), Gear motor, electric motor Cgedpfxodff I Ij An Neu -Speed: 114 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 430/230/H185 mm -Weight: 18.7 kg

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 Cgedpfxsypcryj An Neu -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

Condition: good (used), geared motor, electric motor -Speed: 55 rpm -Power: 0.37 kW -Design: B3 angle -Hollow shaft diameter: Ø 24 mm Codpfx Anjcwl A Eo Negu -Protection class: IP 54 -Number: 1 engine available -Weight: 12.8 kg

Year of construction: 2020, condition: excellent (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 112JM/31/4/6/223S D160L Cedpfexd Tr Sjx An Njgu -Power: 15 kW 1465 rpm -Number: 3x fan available -Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/piece

Condition: good (used), electric motor, three-phase motor -Power: 1.1 kW -Speed: 2845 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 55 Cgsdpfodzwwwox An Nou Quantity: 1 piece available -Dimensions: 275/156/H195 mm -Weight: 9.6 kg

Condition: good (used), Electric motor, three-phase motor -Power: 2.1 kW -Speed: 2870 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 56 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H205 mm -Weight: 18 kg Codpodfi Azjfx An Nogu

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 66 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 50 mm -Protection class: IP 33 -Foot damaged, see picture -Dimensions: 910/294/H350 mm -Weight: 115 kg Cgsdsdkqg Hopfx An Nou

Condition: used, Milling spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 Cgedpfx Ajwyay Dsn Neu HSD 12 kW milling spindle with tool changer and 6-position station for Kuka Quantec series Consisting of: 1 piece Water-cooled milling spindle with HSD ES779L 4P 12.00 kW H1 tool changer, liquid cooling 1 piece Tool station for 6 tools (tool changer station) with Leonie measuring station for checking the tools 1 piece Kuka Tech cabinet with KEB frequency inverter, control technology, and water cooler, art. no. 00216249, serial no. 0395009, year of manufacture 2018 Weight 360 kg 1 piece Hose package and connection cable from the control cabinet to the HSD spindle. Originally intended for a Kuka robot from the Quantec series; all mounting brackets and connections are included. 3626ä

Condition: used, Year of construction: 2011, operating hours: 752 h, * KAESER M 122 screw compressor. * Capacity: 11.4 m³/min * Operating pressure: 7 bar! * Year of manufacture: 2011. * 4-cylinder DEUTZ engine, TCD 2012 L04 2V * Water-cooled, 83 kW, 4,033 cm³ Codpfx Aszbw Ndsn Negu * Operating hours: 752 We expressly reserve the right of prior sale, as we also offer this item on other platforms. Information on accessories is provided without guarantee. Subject to changes, prior sale, and errors. We strongly recommend and encourage a viewing and inspection so that the buyer does not develop any false impressions regarding the condition and suitability. Viewings and inspections are possible at any time by prior arrangement and are expressly desired.

Condition: good (used), Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible Cgedpfofrpnwsx An Nju -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg