Used 2023 Progrinder Table Grinder for sale (18,467)

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,271 h, load capacity: 1,000 kg, lifting height: 2,424 mm, fuel type: electric, mast type: telescopic, construction height: 1,765 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian stacker Load center: 600 mm Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 200Ah Battery manufacturer: Zehnder Battery type: PzS Battery year: 2023 Description: In addition to this equipment, we also offer other forklifts and warehouse technology devices. All our equipment is workshop-inspected and FEM 4.004 certified. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease-purchase and financing on favorable terms are available upon request. We are happy to provide competent and detailed advice on our vehicles. Iedpfoy Hyn Usx Apnoat Impulse control, Non-marking tires,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 550 h, load capacity: 1,000 kg, lifting height: 1,560 mm, free lift: 1,560 mm, fuel type: electric, mast type: simplex, construction height: 1,940 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian Stackers Load centre: 600 Mast type: Mono Condition: Refurbished, no warranty Technical condition: very good Front tyre type: Vulkollan Rear tyre type: Vulkollan Battery voltage: 24V Battery capacity: 138Ah Battery type: Lithium-ion Battery year: 2023 Iodjy Rviiepfx Apneat Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. - with initial lift

Condition: good (used), Laska W130 meat grinder direct from closed UK meat factory. 130mm grinding head. All stainless steel. Ijdpeyzbkajfx Apnjat

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Iaedpfx Aodzp Tbspnot Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. Iaedet E Nw Tjpfx Apnjt 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: good (used), GF Milling machine with feed cast jaws Suva protection Isdpfei Hgxxjx Apneat

Condition: used, Year of construction: 2016, Manufacturer : Kutter- und Gerätebau Wetter Model : AW D114 Year: 2016 Type : automatic mincer / grinder Power : 9 kW Iaodpfx Apjyvv Ddsnst Tank capacity : 110 liters Diameter of perforated disc: 114 mm Rotational speed – processing screw: 160/320 rpm Rotational speed – feed screw: 20–40 rpm Width : 820 mm Depth: 1260 mm Height: 1290 mm Weight : 570 kg Complete technical file  

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. Iajdjgvkc Nspfx Apnst The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: GG65LC-13642, input voltage: 380 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 543LMT-J: PLF float glass cutting table with Low-e coating grinder LMT. SN: GG65LC-13642 (2600Kg-39.1A-10kA) from 2007. Bottero 352 BCS at the end of the cutting/grinding line as a break-out table. SN: GG60SB-3040 (2250Kg - 50Hz - 14.5kVA-380V) from 1995. Iaodpfx Apsw I Dvkonjt

Condition: used, Year of construction: 2023, machine/vehicle number: IntNr231583, CNC Short-Turn Lathe – Citizen Miyano BNE-65 MYY Iaodpfx Aey Sakgjpnjt Condition: Very good, ready for operation Availability: Short notice Technical Overview Manufacturer: Miyano Model: BNE 65 MYY Year of manufacture: 2023 Control: Mitsubishi M800 Equipment: - Main and counter spindle - 2 Y-axes - Driven tools - Multi-channel control - Chip conveyor - Bar feeder Travel paths: - X-axis: approx. 260 mm - Y-axis: approx. ±50 mm - Z-axis: approx. 800 mm Spindle speeds & power: - Main spindle: up to approx. 5,000 rpm, approx. 15–18 kW - Counter spindle: up to approx. 5,000 rpm, approx. 11–15 kW - Driven tools: up to approx. 6,000 rpm, approx. 3–5 kW The machine is fully operational both mechanically and electrically. Complete technical documentation is available. The machine can be inspected under power by prior appointment. Technical data and information subject to change, error, and prior sale.

Condition: good (used), Year of construction: 2017, operating hours: 5,033 h, load capacity: 1,400 kg, lifting height: 4,266 mm, fuel type: electric, mast type: triplex, construction height: 1,940 mm, empty load weight: 1,600 kg, mileage: 5,033 km, Electric triplex stacker Brand: Still Isdpfx Apey D Upnjneat Year: 2017 5,033 operating hours Capacity: 1,400 kg Lift height: 4,266 mm Overall height: 1,915 mm FREELIFT Battery from 2023 Automatic filling system Equipped with external charger Watch the video on YouTube

Condition: excellent (used), Year of construction: 2008, operating hours: 8,948 h, functionality: fully functional, spindle speed (max.): 9,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 660 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,500 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 11,500 W, input voltage: 400 V, year of last overhaul: 2026, CNC Tool grinding machine WALTER Helitronic Power TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC Series 31i-model A5 Software installed: Tool Studio 3 Number of axes: 5 Height of centers: 145 / 190 [mm] Stroke X axis: 470 [mm] Rapid traverse rate X axis: 15000 [mm/min] Stroke Y axis: 330 [mm] Rapid traverse rate Y axis: 15000 [mm/min] Stroke Z axis: 660 [mm] Rapid traverse rate Z axis: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Max. grinding wheel speed: 9500 [rpm] Grinding spindle motor power: 11.5 [kW] Max. diameter grinding wheel: 200 [mm] Number of hours under power: 8948 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 120 [l/min] Lubrication tank capacity: 400 [l] Supply voltage: 400 [V] Total power required: 25 [kVA] Weight: 4500 [Kg] INCLUDED EQUIPMENT: x1 TOOLSTUDIO 3 software x1 direct-drive A axis (Hollow Shaft) x1 automatic tool clamping system x1 RENISHAW LP2 part probe x1 DSL Air Technology type AES-GAMMA 30 mist extractor x1 lubrication tank + paper filtration system x1 GRUNDFOS coolant pump x35 grinding wheel holders (equipped with CBN wheels) x22 ISO50 attachments Iajdpfxoy Sxrpe Apnst x1 SCHUNK collet holder x22 collets x1 NIKKEN collet holder x13 NIKKEN collets x1 metal rack for grinding wheel holders and ISO50 attachments 1x ISO50 calibration mandrel intended for axis calibration 1x calibration disc intended for axis calibration x1 set of service wrenches Various technical manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Machine similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 690 mm, total length: 600 mm, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, space requirement height: 900 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 30 Watt (Optional: 20 Watt, 50 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V Iasdpfx Aoy I Nbmspnet - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 2,000 mm, total height: 900 mm, Work Table AT 2000 with Granite Top + Flour Cart Bakery and Confectionery Work Table Stainless steel with granite worktop with granite gallery at the back reinforced welded construction Iodey Nv Dkepfx Apnjat bottom left with drawer unit stainless steel flour cart for 100 kg with divider doors and intermediate shelf on the right mobile stainless steel version Dimensions approx.: 2000 x 800 x 900 mm (W x D x H) Used equipment, as new Visit our large selection!

Condition: like new (used), functionality: fully functional, total length: 800 mm, total width: 2,000 mm, total height: 900 mm, Work Table AT 2000 with Granite Top + Sliding Doors Iodpfoy Nv Ddsx Apnoat Bakery & Pastry Work Table Stainless steel with granite worktop with granite gallery at the rear reinforced welded construction lower section with sliding doors and intermediate shelf mobile stainless steel design Dimensions approx.: 2000 x 800 x 900 mm (W x D x H) Used unit in as-new condition Visit our wide range of work tables!

Condition: new, Year of construction: 2025, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, workpiece length (max.): 60 mm, number of axes: 3, controller manufacturer: ISAC, actuation type: electric, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, GO! 1300M CNC DRILLING MACHINE Isdpfsy Nyypsx Apnoat OPD201001 HSD Spindle Motor 5,5 kW - ER32(Manual) OPD201100 HSD Boring Unit - 17 Tools Capacity OPA0032 AES Wop CAD/CAM Program OPA0710 HSK F63 ER32 Tool Holder OPD201900 Go! Seaway Packaging System OPD201831 GO! HMI - English Interface

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Iodpfx Apslfilyonoat Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Condition: new, Year of construction: 2025, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 380 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, number of axes: 3, number of slots in tool magazine: 8, actuation type: electric, total length: 4,200 mm, total width: 4,000 mm, overall weight: 5,000 kg, table length: 3,200 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, SUPER NOVA 2132 - CNC ROUTER Brand new & ready for pick up packaged showroom machine include NC Hops 8 and 2*250 m"/h vacuum pumps. (EXW BELGIUM) Super Nova 7,5 - 9 kW Spindle (ISO 30) Iodpey Nynmsfx Apneat Super Nova 9 Vertical Spindles Boring Unit Super Nova Handwheel Unit Super Nova Automatic Lubrication Unit Rotary Tool Changer Unit (8 Tools Capacity) 2 pieces 250m³/h Vacuum Pumps 6 Zones PLC controlled automatic vacuum Area NC HOPS - 3 Axis CNC Router(with Betternest module included) Safety Lights (1 Set) Tool Holder/Collets Kit (8 Pcs) Super Nova HMI - English Interface Super Nova 2132 Seaway Packaging System

Condition: used, Year of construction: 2008, operating hours: 43,705 h, functionality: fully functional, machine/vehicle number: 192/2008, total height: 2,400 mm, total length: 1,800 mm, total width: 1,930 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 500 rpm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 3,800 kg, rotational speed (max.): 40,000 rpm, grinding spindle speed: 40,000 rpm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 305 mm, grinding spindle motor power: 14,000 W, power: 22 kW (29.91 HP), workpiece diameter (max.): 250 mm, grinding diameter: 250 mm, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 500 rpm, year of last overhaul: 2023, number of spindles: 1, number of slots in tool magazine: 12, Equipment: rotational speed infinitely variable, We are offering this used Deckel S22E universal machining center, year of manufacture 2008. Iaedpfx Aey Nbnnjpnet Model: S22 Serial number/year: 192/2008 Machine weight: 3700 kg Maximum wheel diameter: 150 mm Rotational speed: 40,000 rpm Wiring diagram: 2292509 S558 Mains voltage: 3P/N/PE 3x400 V Frequency: 50 Hz Nominal current: 25 A Power consumption: 15 kW Spare fuse: 32 A Control voltage: 24 V Suitable for oil-based grinding: Yes Spindle: Supplied with an additional fully overhauled backup spindle Spindle cooling: Equipped with external spindle cooling (MTA TAEevo Tech MINI 10, Year 2017, 486x660x876 mm) Fire suppression system: Kraft & Bauer FB 703 TFT monitor: Needs to be replaced If you have any questions or would like more information, please feel free to contact us or call us.

Condition: good (used), Gruse ELS 2-13-9 Hydraulic Scissor Lift Table The Gruse ELS 2-13-9 is a stationary scissor lift table from the ELS series, designed for a load capacity of up to 2000 kg. It features a robust tubular scissor construction and is engineered for use as an assembly or loading table. Features and Equipment Safety Features: The lift table is equipped with a perimeter safety contact strip (safety edge) on the platform, hose rupture valves mounted directly on the cylinders, and electric check valves. Iedpjy Nxl Dsfx Apnoat Construction: It features sturdy upper and lower frames as well as maintenance-free scissor bearings. Operation: Control is provided standardly via a "dead man" handheld push-button with an emergency stop function. Load Capacity: 2000 kg. Platform Dimensions: 2000 x 1000 mm. Effective Lift Height: 1300 mm. Closed Height (retracted): approx. 200 mm. Total Height (extended): approx. 1500 mm. Lifting Time: approx. 18 seconds. Drive System: 400 V electro-hydraulic unit with an output of approx. 2.3 kW. Weight: 800 kg. New Price: €9,175.00 You can find other scissor lift tables in various sizes—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2006, weight max. in kg 1000 kg Iaedpfx Ajy Ez Awopnjt table length 1500 mm table width 1000 mm height over floor 200 mm stroke height 200 - 1200 mm stroke Zeit ca. 15 sek total power requirement 2.3 kW weight 330 kg current new price approx. 5.000 euros special price on request Equipment: - Robust electro-hydraulic scissor lift table - for ergonomic working at an optimum working height - with closed platform - stepless lifting and lowering - All-round safety rails - Placement: free-standing on the floor or as a pit installation - remote control

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Location: Nattheim Isdpfx Asyudidjpnsat

Condition: used, table length 4900 mm table width 1300 mm table height 980 mm weight of the machine ca. 5,6 t dimensions 5,0 x 1,3 x 0,6 m Welding / Straightening Table Isdjy N D I Ropfx Apnjat - Plate thickness: 80 mm - Plate thickness (incl. frame): 360 mm

Condition: used, Year of construction: 1984, spindle diameter 180 mm x-travel 1000 mm y-travel 1000 mm Control DIXI CNC 4400 total power requirement 47 kW Isdpey Nfdgefx Apnsat weight of the machine ca. 17 t dimensions of the machine ca. 4835 x 2700 x 3190 m

Condition: used, Year of construction: 1995, rotary table diameter 600 mm boring diameter 600 mm grinding height 450 mm control Siemens Sinumerik 840 C total power requirement 30 kW Isdpsy Nfdajfx Apneat weight of the machine ca. 14,5 t