Used 4 Rolls Hydraulic Bending for sale (69,367)

Condition: new, bending length: 2600sheet thickness: 13upper roll diameter: 270sheet length: 2600 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. Lajdpfx Amod Ab Tdsnja - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 6.690.00 We have many references!

Condition: new, bending length: 2100sheet thickness: 13upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings Lasdpfxsd Ab Tie Amnoa - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 5.560,-- We have many references!

Condition: new, bending length: 2600sheet thickness: 8upper roll diameter: 210 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Lasdpfxed Ab Tle Amnja Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, bending length: 2100sheet thickness: 8upper roll diameter: 190 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls Ledpfx Aod Ab Tpemneaa - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.600,-- We have many references!

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg Laodpfx Asw Smdfjmnja

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls Lodpjkwcc Nsfx Amnoaa 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø Lasdpfokvm Szox Amnea 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø Lasdpfxokvm S No Amnja 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Lsdpfx Amoygw Iksnsaa Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Laedpfx Asw Slctjmnja Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm Lasdpfx Aowk Rlxemnsa max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: like new (used), Article description: 22 pcs. unused hydraulic motors M+S Hydraulic MT/B 315C/4 ----- Lodpfx Aoyyyadomneaa Item condition: Unused stock item. Storage marks possible. Internal number: 26.310

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity Laedpfx Aoh U Rzgsmnoa 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm voltage 400 V Ledpsyuql Ssfx Amneaa total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) Ljdsxaawgopfx Amnoaa - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC Lodjxacdvopfx Amneaa - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, mileage: 260,097 km, power: 463 kW (629.50 HP), first registration: 03/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking heater, retarder, seat heater, traction control, trailer coupling, = Additional options and equipment = - Remote central locking - Refrigerator - Air suspension - Towing jaw - Microwave - Engine brake - Hub reduction - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Mercedes-Benz Actros 4163 8x4-4 SLT 25,000 kg GCW. 3.5" adjustable fifth wheel. Rockinger trailer coupling 56 mm. Hydraulic system on engine PTO. Hydraulic connections at rear chassis end 24V NATO plug. Work lights. Toolboxes. Worklights. = Further information = Technical details Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steering; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf springs Front axle 2: Tire size: 385/65R22.5; Steering; Tire tread left: 40%; Tire tread right: 40%; Suspension: Air suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Inside left: 50%; Outside left: 50%; Inside right: 50%; Outside right: 50%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Inside left: 50%; Outside left: 50%; Inside right: 50%; Outside right: 50%; Suspension: Air suspension Weights Unladen weight: 15,200 kg Payload: 25,800 kg Gross vehicle weight: 41,000 kg Financial information Lasdpfxjy Dccve Amnoa Price: On request Identification Type number: 4163 SLT 8x4-4/ 250T / PUSH - PU = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki. We make every effort to provide correct information, however, no rights can be derived from the listed texts.

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Empty weight: 2.500 kg Price: On request Lasdeyym Tdjpfx Amnsa - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Lsdpfxeww I Tme Amneaa

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Main motor with Brake System Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Laedpfohpchyjx Amnea Bending capacity mm Roll diameters Ø mm Roll speed m / min. (dk.) Motor power kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 IRM 1550 x 140 1550 4 140 3.5 2.2 4 / 7 / 9 / 13 2700 750 1000 1420

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm Ledpfxsh Timpj Amnjaa roll diameter 140 mm weight 1150 kg dimension L-W-H 2020 x 900 x 1200 mm motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm Lasdpfxjywzlpe Amnsa -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 9108, Offer 26001 Technical Data: - Horizontal and vertical working positions - 3 motor-driven rollers - Hydraulic adjustment of the lower left roller - Pressing force of hydraulic cylinder: 4 t - Shaft diameter: 35 mm - Shaft rotation: 11 rpm Lasdpfsy Dqn Tsx Amnja - Roller diameter: 132 - 142 mm - Drive: 400 V, 1.1 kW - Bending capacity approx.: - Round tube Ø 800, 60 x 1.5 mm - Flat steel Ø 400, 90 x 15 mm - Square bar Ø 400, 30 mm - Includes: - Separate control panel with digital display - Foot switch on separate control panel for right / left operation - Standard bending set for flat and angle material - 6 sets of tube rollers: 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx.: 450 kg - Space requirement approx.: W 700 x H 1150 x D 950 mm

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Ljdpfjy Exdfex Amnoaa Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: used, functionality: fully functional, machine/vehicle number: 3133, Boldrini BSA.36 Section Bending Rolls 200mm x 200mm section capacity Laedey Azg Repfx Amnja With Formers and Guides