Used Airpress Aps 9 500 for sale (33,135)

Condition: used, functionality: fully functional, mileage: 209,291 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Retarder: YES ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: YES Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Cab side air deflector - long tractor Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Iodsz Aglvjpfx Ac Iebb Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 10 mm Rear left outer - 9 mm Rear right inner - 9 mm Rear right outer - 11 mm

Condition: used, Year of construction: 2001, Dematic roller conveyor right with straight section 1000-90°-500-440 IR795 RA2356 Make: Dematic Ibsdpfx Acevygx Ue Ijb Direction of rotation: 90° right-running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm Length of straight section: 1000 mm Frame height: 132 mm Overall height including motor: 275 mm Conveying speed: 0.33 m/s Drive type: Round belt Electrical details: Motor type: SEW geared motor Motor power: kW 0.25 380V Optional: Supports Side guides Frequency converter for stepless speed control convertion to left Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 394,000 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, overall weight: 40,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: soot filter, - Retarder, air conditioning, lifting mechanism, and steered rear axle, dump truck, 19 m3 Suspension: Leaf spring and air suspension Iedpoz Af Ebofx Ac Isbb

Condition: good (used), Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch, pneumatic press -Support frame: for press or punching tools -Upper part: adjustable stroke approx. 60 mm (without press cylinder) -Lower part: with ejection pneumatic cylinder stroke 30 mm -Projection: 220 mm -Dimensions: 500/440//H890 mm Ibedpfx Ajilfploc Ijb -Weight: 92 kg

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Ijdpfx Acouqdi Uo Iobb Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Iodpjy Sup Dsfx Ac Isbb Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: new, Year of construction: 2026, Working area: X - 1500mm, Y - 1500mm Z axis clearance: 300mm Worktable type: hybrid, i.e. vacuum + mechanical rails Number of vacuum sections: 2 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker KVT 3.140 vacuum pump Drive: Full Leadshine AC servo drives with 750W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 25mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost: PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Fire-rated wiring, bendable and protected against deformation Machine dimensions 2360 / 2510 / 2415mm Iodpfx Aszr Ecrjc Ijbb

Condition: used, height 1500 mm working width / mm distance to reflector / mm Safety light curtains Leuze electronic CT90 + CR90 1500/A Set Sender + recipient Isdpfx Acjy Sumve Ijbb Set: 1x transmitter - CT90-1500/A 1x receiver - CR90-1500/A Resolution: 90mm Protective Field Height: 1500mm Range: 0-18m Rating: IP65

Condition: excellent (used), mileage: 664,966 km, power: 213 kW (289.60 HP), first registration: 06/2008, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Year of construction: 2008, Equipment: tail-lift, Cab: single Empty weight: 9.970 kg Carrying capacity: 9.030 kg GVW: 19.000 kg Tail lift: slider lift Technical condition: very good Iedpfx Aozz S T Nsc Iobb Visual appearance: very good Registration number: CX427QQ = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, MiR 200 December 2018 – used but in perfect working condition Length: 890 mm Width: 580 mm Height: 352 mm Weight (unladen): 62.5 kg Loading surface: 600 x 800 mm Robot payload: 200 kg (maximum 5% incline) Towing capacity: 500 kg (see separate MiRHook 200 datasheet) Endurance: 10 hours or 15 km Maximum forward speed: 1.1 m/s (4 km/h) / reverse: 0.3 m/s (1 km/h) Battery: Li-NMC, 24 V, 40 Ah; charging time: up to 3 hours (0-80%: 2 hours) WiFi: Dual-band wireless AC/G/N/B SICK S300 laser scanners (x2): 360° visual protection around the robot Iodoun Sq Uspfx Ac Isbb Intel RealSenseTM 3D Camera: Object detection in front, 50-500 mm from the floor Ultrasonic sensors (x4): Detection of transparent objects in front, e.g. glass doors Safety compliance and certifications: EN 1525, PLd cat. 3, ESD approved and CE certified Price €13,000.00 (+VAT)

Condition: used, Year of construction: 2007, operating hours: 2,000 h, power: 283 kW (384.77 HP), Equipment: air conditioning, cabin, * Engine manufacturer: John Deere Ibedpfx Asil Hadsc Ieb Equipment: Air conditioning, straw chopper, cutterbar carriage, hillside compensation, onboard computer/monitor, throughput control, yield measurement, reel horizontal adjustment, hydrostatic drive, reversing device, cutterbar, loss measurement Shaker with JD625R cutterbar with a working width of 7.60m, transport trailer, and rape seed table ENGINE IS MAKING NOISE.

Condition: used, Year of construction: 1998, Transnorm conveyor belt GF 19480-600-500 RA2107 Technical data: Conveyor length (NL): 19480 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Ijdpfx Acjpdv N No Ijbb Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, System: Chamber filter press Type: Chamber filter press 1500/90 Design: side bar guided Filter plate size: 1500x1500 mm Number of plates: 90 Filter plates: PP Cake thickness: 25 mm Filter cloths: optionally available according to the medium Discharge: closed Filter area: approx. 350 m² Press volume: approx. 5049 dm³ Plate pack length: approx. 7000 mm Ibedpfowqzhwex Ac Isb Filter pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: automatic Hydraulics: automatic Motor voltage: 380 V Control voltage: 230 V - 24 V Dimensions: LxWxH 10100x2300x2050 mm Weight: approx. 31000 kg Control cabinet: yes Operating side: right or left Hydraulic unit: yes Purchase or rental: Inspections of the systems can be arranged at our plant.

Condition: used, mileage: 342,000 km, power: 65 kW (88.38 HP), first registration: 04/2003, fuel type: diesel, overall weight: 2,700 kg, next inspection (TÜV): 09/2027, color: blue, gearing type: mechanical, emission class: euro3, number of seats: 2, total length: 4,707 mm, total width: 1,840 mm, total height: 2,050 mm, loading space length: 2,400 mm, loading space width: 1,600 mm, loading space height: 1,370 mm, Equipment: ABS, Second-hand since 2007. Valid TÜV (German vehicle inspection) until 09/2027. Last oil service with filter replacement was in 07/2026, 500 kilometers ago. Passenger car registration with up to 9 approved seats. The vehicle was always used as a work vehicle and transporter. Therefore, it has a wooden floor in the rear and a small shelf behind the permanently installed, original partition with a window. There are no other seats besides the 2 front seats. Iodpszxkduofx Ac Iobb Sliding door on the right. Practical double doors at the rear, with wipers and heated rear window. Sturdy roof rack made of steel tubes, permanently installed by a tradesman in high quality "for eternity." Painted in the vehicle's color. Power steering. ABS. Radio. Airbags for driver and front passenger. Euro 3 TDI diesel engine with 2461 ccm and 88 hp. Engine code: AJT. 5-speed manual transmission. Tow hitch with a 2000 kg braked towing capacity is prepared, but the ball head is missing. Oil pump with reduced performance according to workshop diagnosis. The oil warning light sometimes comes on. During the last drives, the light was off again. The T4 is currently running perfectly normally and has full engine power. Brake warning light with contact error. Has been illuminated for some time. Brakes and brake pad thickness are in order. Some rust, but overall still minimal. This T4 TDI was driven by the same driver for many years and was also used for vacation trips and personal use. He often repaired the car himself. This vehicle is well-known here "in the village," and many people know the person who always drove it. This offer is only valid for businesses and freelancers of any kind. Sale to private end consumers is unfortunately not possible. Subject to prior sale and errors. Net price: 2900,- Euro!

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205013, Field of application: Construction Empty weight: 1.414 kg Generator capacity: 500 kVA Ijdowqknmepfx Ac Isbb Dimensions of cargo space: 131 x 72 x 98 cm CE mark: yes Frequency: 50 Voltage: 400 Production country: CN Please contact Team DPX for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm Ibodpfx Ajzv H Anoc Ieb TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Measurements height 1300 mm Ibodpjx Sz D Iofx Ac Ieb This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: excellent (used), Year of construction: 2022, volume flow: 10 m³/h, AIRPRESS CRDP 600 desiccant dryer Capacity: 10 m3/min Year of manufacture: 2022 Iedpfx Aezkwatsc Isbb THE DRYER IS IN FULLY WORKING CONDITION.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,819 h, load capacity: 2,500 kg, lifting height: 5,500 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, motor manufacturer: Volkswagen, fork length: 800 mm, tire condition: 100 %, overall weight: 4,900 kg, empty load weight: 4,900 kg, total height: 2,500 mm, total length: 1,900 mm, total width: 1,930 mm, Equipment: CE marking, adjustable boom, cabin, pallet forks, Very good condition Only 4819 hours!!!! Ibjdpfx Aezw Hxxsc Isb We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 Iedpfx Aceg Sxmfs Iebb wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm Ibsdpfx Aowxy Dgec Iob - Throat depth: 610 mm - with support table

Condition: used, mileage: 540,000 km, first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,300 mm, Equipment: air conditioning, crane, had accident, parking heater, * Manufacturer: Scania * Model: R500 * Axle configuration: 6x4 * Power: 500 hp (368 kW) * Engine: 12,742 cm³ * Year of manufacture / First registration: 04/24/2019 * Emission standard: Euro 6c * Mileage: approx. 540,000 km * Wheelbase: 3950 / 1350 mm * Manual / Automatic transmission * Air suspension * 400-liter fuel tank * Auxiliary heater (Webasto Thermo Pro 38) * Body * Timber transporter (stake body) * Robust aluminum/steel body * Ideal for roundwood transport * Crane * Palfinger Epsilon timber crane * Grapple included * Crane was fully operational until the accident Iedpjzqiwkefx Ac Isbb * Condition * Vehicle runs and drives perfectly * Engine, transmission, and technology in good condition * Cab on the driver's side damaged in an accident * Body and crane also damaged or require inspection (see pictures) * Sale preferably to export, dealers, or as a repair project * Equipment * Automatic climate control * Scania infotainment system * Cruise control * Auxiliary heater * Multifunction steering wheel * Digital tachograph * Air-suspended driver's seat Inspection possible at any time by appointment. We will gladly send more photos and videos upon request.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Ibsdpfxjzzq Sqj Ac Isb Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: used, mileage: 540,000 km, first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,300 mm, Equipment: air conditioning, crane, parking heater, * Manufacturer: Scania * Model: R500 * Axle configuration: 6x4 * Power output: 500 hp (368 kW) * Engine: 12,742 cm³ * Year of manufacture / First registration: 04/24/2019 * Emission standard: Euro 6c * Mileage: approx. 540,000 km * Wheelbase: 3950 / 1350 mm * Manual/automatic transmission * Air suspension * 400-liter fuel tank * Auxiliary heater (Webasto Thermo Pro 38) * Body * Timber carrier (stake body) Ijdpfjzqiwwsx Ac Iebb * Sturdy aluminum/steel body * Ideal for transporting round timber * Crane * Palfinger Epsilon timber crane * Grapple available * Crane was fully operational until the accident * Condition * Vehicle runs and drives perfectly * Engine, transmission, and technology in good condition * Cab on the driver's side damaged in the accident * Body and crane also damaged or require inspection (see pictures) * Sale preferably to export, dealers, or as a repair project * Equipment * Automatic climate control * Scania infotainment system * Cruise control * Auxiliary heater * Multifunction steering wheel * Digital tachograph * Air-suspended driver's seat Inspection possible at any time by appointment. We will gladly send additional photos and videos upon request.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Ibsdsy Iaa Tspfx Ac Ijb