Used Altendorf F35 Typ 2-1000 for sale (82,898)

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Hsdpfx Aqsi Rizuepjfn Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Hfsdpfx Aezk N Ateqpjn Availability: at short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), Volland Telemetry MICRODAS B1 Type: BW 2, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hedpfx Aqjz Adhzjpjfn

Year of construction: 2026, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or Hfsdpeuia Dqofx Aqpen water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm Hfodpfxewp Dn Do Aqpon T dimension: 22 mm Number of T-slotted sides: 2 Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort Hfsdpsuayyyofx Aqpen - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs Hjdpouayy Hefx Aqpefn - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Hfodpfx Asuayy Tsqpjn Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: excellent (used), Year of construction: 2007, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Cnc : SIEMENS 810 D Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Hjdpfx Aqowgmz Uepefn Main shaft hole diameter : 104 mm Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Bed width : 550 mm Machine equipped with : a 4-jaw chuck, 800 mm diameter

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm Hfsdpfx Aqeg Dgr Hspjn max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm Hfedpfezkvucex Aqpon -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: used, Year of construction: 1995, load capacity: 1,000 kg, lifting height: 800 mm, construction height: 1,230 mm, fork length: 1,140 mm, drive type: Handbetrieb, construction width: 515 mm, Scissor lift truck Fork width: 160 mm Fork thickness: 50 mm Condition: Ready for use and fully functional Technical condition: good Hsdpfjt Hm Dtex Aqpsfn Front tires Type: Polyurethane Front tires Condition: 40 - 60% Rear tires Type: Polyurethane Rear tires Condition: 40 - 60% Stainless steel version

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with adjustable baffle -Roll width: 990 mm Hfsdjb Rypaspfx Aqpsn -Conveying length: 4800 mm -Diameter roller: 85 mm -Center distance: 155 mm -Height: mm -driven: via gearbox -Geared motor: kW -Speed: m/min -Dimensions: 4900/1350/H1100 mm -Weight: 1190 kg

Year of construction: 2026, condition: new, functionality: fully functional, BMD-1000-2-N METAL DETECTOR APPLICABLE FOR CONVEYOR WIDTHS UP TO 1000MM Hfedpfx Aqszmnwnspen SENSITIVITY ADJUSTMENT FOR METAL DETECTION POSSIBILITY OF ADAPTING A RIVET SENSOR INCLUDES A VISUAL AND AUDIBLE WARNING CONTROL BOARD Manufacturer: BAS - Başkent OSB, Sincan, Ankara, Turkey

Condition: used, 2 ESYLUX HAST 1000 spotlights with stands and control units for lighting and heating workpieces, workspaces or other areas of application. Hedszry Aaepfx Aqpjfn Technical data: - Spotlight: Max. 1,000 W - Stand height: 192 cm

Condition: new, - Electric motor height and swivel adjustment 0 - 46° for the main saw blade - Digital swivel angle display - Saw blade projection max. 150 mm, saw blade diameter max. 450 mm - Double roller carriage, carriage length 3000 mm including stepless upper carriage lock - Parallel stop manual adjustment, adjustable via measuring scale, including fine adjustment, cutting width 1000 mm - Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed 4000 rpm - Tool clamping system AKE for the main saw blade Item no. M19308 - including surcharge for motor 5.5 kW (7.5 HP), 3 speeds Hsdovyuriepfx Aqpofn

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, rotational speed (max.): 1,750 rpm, rotational speed (min.): 1,450 rpm, Equipment: type plate available, Refurbished Landert motor Manufacturer: Landert Motoren AG Bülach Hfsdpfx Asw Rn Hxsqpon Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Worm gear drive) Nameplate present Price negotiable Our asking price is €1,150.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and inaccuracies. Sale exclusively to countries within the EU.

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Hfsdpfxel Tnz Ee Aqpsn Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS - LED lighting - Alloy wheels - Air suspension - Spare wheel - Tool box - Central lubrication system - Additional steering axle Reference: 0-318 PAVIC 2-axle forestry machine lowboy trailer, type: STLT2Z for harvester transport – in progress! Color can be chosen freely!!!! Fifth wheel load: 18,000 kg Aggregate load: 24,000 kg (technical) Total weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis as a steel welded structure made of high-quality fine-grain steels Lashing eyes 130KN per side, 5 pieces Additional lashing eyes, 3 pairs on the upper bed Steel stake system, galvanized with aluminum sideboards (silver anodized) Steel front wall, approx. 400mm high Folding aluminum ramps with mechanical locking Central lubrication system SKF with reservoir (brake light-controlled) with approx. 20 lubrication points Dimensions: Overall length: 16,000 mm Bed length including rear area: 11,364 mm Fifth wheel height: 1330 mm Ground clearance in driving position: 184 mm Fifth wheel dimension: 600 mm R1 dimension from kingpin to the front: 410 mm (turning radius) R2 dimension: from kingpin to the frame: 2150 mm (turning radius) Further dimensions can be requested from us (technical drawing) Axles: 2x 12,000 kg (technical) Gigant with drum brake in conjunction with 8 pieces of 245/70 R17.5" brand-name tires on Alcoa Dura Bright rims Suspension: pneumatic with lifting and lowering function Second driving height + approx. 50 mm can be switched on from the cab. At a speed of 20 km/h, the vehicle lowers again. Including axle load gauge Hfodpfjyr Izxjx Aqpon Coupling device: 2" kingpin (exchangeable, one position) WITHOUT fifth wheel supports! -> Customers use a wide square timber here, which is placed under the front frame. Braking system: Wabco EBS with axle load measuring device (Smartboard) incl. odometer Parking brake: spring-loaded accumulator Lighting system: Rear lights, 2 pairs (3-chamber light) Side marker lights LED Outline lights LED Position lights front and rear LED Reversing light and auxiliary light each in round design License plate light LED 1 piece rotating beacon, pluggable and can be switched from the cab via a separate switch Isbexvz Skjqvxmuwjhu 4 pieces LED work lights 4 pieces overwidth markers, double-secured (knob screw and pin) with LED lighting, red/white Steering: Tridec HF-E (hydraulic displacement steering on both axles) including automatic lane keeping and straight-ahead function. Remote control Tridec (radio remote control) can also be used in cable mode Painting: Complete steel structure blasted and primed with a special adhesion primer after welding. Subsequent 2-component paint in RAL color. Axles and wheel hubs are black or, for an extra charge, painted in RAL color. Other components are galvanized or painted / powder-coated or made of aluminum (with or without anodizing) Approval: including §13 certificate including §70 certificate (customer must provide a suitable and approved 3-axle semi-trailer tractor) including, among other things, a circular test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors and changes. Axle configuration...

Condition: excellent (used), Year of construction: 2007, operating hours: 88,631 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, plate length: 795 mm, plate height: 790 mm, total length: 5,100 mm, total width: 2,000 mm, overall weight: 9,000 kg, Arburg 520A-1000-400 (246) hybrid injection molding machine with sorting flap and gas boost Number: 246 Availability: in stock Year of production: 2007 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1600 Column spacing [mm]: 520 x 520 Plate size [mm]: Hfodjzzb N Hjpfx Aqpsn 790 x 795 Control type: Selogica Tongue: german Installed power [kW]: 21.2 Working hours [h]: 88631 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Feed hopper: NO Robot socket: Yes Air valve: 3x

Condition: ready for operation (used), Siemens 1HU1053-2 tacho 20V at 1000 rpm, load 13.3 Ohm, used, normal signs of wear, 100% functional, scope of delivery as per photos. Hsdox Dvfbjpfx Aqpjfn

Condition: good (used), Year of construction: 2021, ARI Premio dashboard actuator, sliding drive, type 2.2 kN – used: Price per unit, ex works: €585.00 (net)! Manufacturer: ARI-Premio Type: 2.2 kN Year of manufacture: 2021 Serial number: SN100592339-027 Pn: 15/16 VA In: 65/69 mA m/m: 0.38/0.45 10 A Stroke: 20 mm Ty: 53/458 Available quantity to be determined Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia Hfjdpfjz Sdw Usx Aqpen

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: black, driver cabin: other, gearing type: other, Year of construction: 1999, Vehicle location: Bovenden Superstructure: Grabber, payload 300 kg, grabber width 470 mm, depth 700 mm Load capacity: 4,000 kg Hsdpszzbg Eofx Aqpefn 320 bar ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: good (used), Plastic chain conveyor, conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt width: 700 mm -Length: 1000 mm -Speed: 9.1 m/min -Dimensions: 1100/1000/H200 mm Hfsdpfxeb A Rt Aj Aqpon -Weight: 136 kg

Condition: new, Year of construction: 2025, table length 1000 mm table width 2000 mm table height 200 mm weight 650 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Hsdoymf I Sepfx Aqpsfn • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table