Used Balers Kenbay Brg 1 2005 for sale (78,835)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Ncjdpfx Aozdn H Rjgpsu Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Ncsdpfezdny Rex Agpeu Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Ncjdjzdnxgopfx Agpju Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-compartment IMO-1 Bottom discharge Steam heating 5-Year CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable for: Chemicals, construction water, fuel, wastewater, and effluent Weights Tare weight: 3,860 kg Payload: 30,140 kg Gross weight: 34,000 kg Ncsdjyu Iggopfx Agpou Functional Compartment volume: 24,690 l Body make: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further Information Please contact Arne Honingh for more details.

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 - Working width: 1300 mm - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm - Suitable for drying edges - Suitable for mercury and gallium tubes. - Tube power 80 W/cm - For mounting on an existing Ncedpfxozf N Tne Agpou conveyor - Location: in storage - Volts, Hz 400 / 50 - Good condition

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma Ncedpfx Agsy S S Htspju - Model: KR-1300-1 - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Condition: used, Year of construction: 1997, machine/vehicle number: MR1TLL97037, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm Ncedpfx Ajzf N E Rsgpou - working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00555, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240 Ncedjzfgq Rjpfx Agpsu   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: good (used), mileage: 440,500 km, power: 188 kW (255.61 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, total length: 9,700 mm, total width: 2,550 mm, total height: 3,750 mm, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 9,440 kg, loading space length: 74,500 mm, loading space width: 24,300 mm, loading space height: 25,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, = Additional Options and Accessories = - Roof hatch - Roof spoiler - Euro 6 compliant - Driver airbag - Remote central locking - High beam headlights - Cruise control - Wooden cargo bed - Adjustable steering wheel - Air suspension - Sun visor - Immobilizer = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Maximum front axle load: 5,800 kg Maximum rear axle load: 9,440 kg Nedpfeu A R Atjx Agpecu Weights Unladen weight: 7,290 kg Payload: 7,010 kg Gross vehicle weight (GVW): 14,300 kg Functional Tail lift: ZEPRO, rear door, 1,500 kg Maintenance, History, and Condition APK (Periodic Technical Inspection): valid until 06/2027 Technical condition: good Optical condition: good Identification License plate: 62-BTD-1

Condition: excellent (used), VMI SPI 280 Av Mixer Stainless steel Complete with 1 mixing bowl Nice clean mixer Ncjdpfezcrm Hex Agpou In very good condition

Condition: excellent (used), RMS Vibrations Testing System SW 8100/1 Manufacturer: RMS Type: SW 8100/1 Machine Type: Electro-dynamic Vibration and Shock Testing System Design: With sliding table, head expander and amplifier For sale is a used electro-dynamic vibration and shock testing system from the manufacturer RMS. The system is suitable for vibration, shock and fatigue testing in the areas of development, quality assurance, research, material testing and product testing. Technical Data Sinusoidal Force: 24 kN Random Force: 20 kN Shock Force: 28 kN Displacement: 1.5" Armature Stroke: ±22 mm Armature Diameter: 284 mm Thread: M10 Max. Acceleration: 130 g Ncodpfozd T Rhsx Agpou Acceleration at 60 kg payload: 30 g Frequency Range: 5 - 3000 Hz Weight Compensation: up to 500 kg Total Connected Power: approx. 35 kVA Required Cooling Water: optimally 15 °C - 20 °C Water Flow Rate: approx. 25 l/min Water Pressure: approx. 3 bar Compressed Air: 6 bar for weight compensation and center suspension Total Weight: approx. 3,500 kg Equipment Vibration Exciter SW 8100/1 Sliding Table Digital Amplifier Control Cabinet with Water Cooling Connection Box / Fuse Box Head Expander made of Magnesium Angle for Sample Mounting / Horizontal Shock Testing Water-Cooled System Head Expander / Test Table Head Expander Weight: approx. 50 kg Mounting Surface Head Expander: 800 x 700 mm Grid: 50 x 50 mm Thread: M8 Angle for Sample Mounting: approx. 25 kg Mounting Surface Angle: 230 x 230 mm Thread: M8 Suitable for use in high-performance horizontal shocks Modernization / Expansion 2021 The system was expanded in 2021 to achieve higher performance levels. The water cooling system was expanded with an additional plate heat exchanger for better heat dissipation to the cooling water. The main transformer for the digital amplifier was replaced. The power was increased from 15 kW to 24 kW. The voltage was increased from 92 V to 120 V. The capacitor bank was expanded to achieve better shock performance. The weight compensation was renewed. Scope of Delivery 1x Connection Box / Fuse Box 2x Control Cabinet, Water Cooling and Amplifier, approx. 250 kg each 1x Shaker / Vibration Exciter, approx. 2,200 kg 1x Sliding Table, approx. 450 kg 1x Head Expander, approx. 50 kg 1x Angle for Test Specimen Mounting / Horizontal Shocks, approx. 25 kg Condition Used Amplifier Serviced New Main Transformer New Capacitors Capacitor Bank Enlarged Water Cooling Optimized with Additional Plate Heat Exchanger Weight Compensation Renewed Optical Condition according to Pictures Sale from our location. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure Ncedpfszd Rmgex Agpeu - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2001, color: other, loading space volume: 25 m³, UBH INTERNATIONAL 20FT ISO Tank Container 22,500L / 3 compartments Compartment 1: 7,500L Compartment 2: 7,500L Compartment 3: 7,500L IMO1 T7 22T6 Bottom discharge Steam heating 2.5Y- + CSC test valid until 09-2028 = Further information = General information Ncsdsyznbxopfx Agpsu Year of manufacture: July 2001 Model year: 2001 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Unladen weight: 4,550 kg Payload: 29,450 kg GVW: 34,000 kg Functional Body brand: Van Hool 24.720L TC, 2 compartments (11,950L/12,770L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.

Condition: excellent (used), IPG Ytterbium Fiber Laser with Controller Ncedpezdyyvsfx Agpsu Here we offer an IPG Ytterbium Fiber Laser with controller. IPG Ytterbium Fiber Laser Type: YLP-C-1-100-20-20 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 1996, condition: used, For sale: 1 transformer, 1000/800 kVA. Manufacturer: Heim. Ncjdpfx Ash Eu Rzjgpju

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2015, total length: 13,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: grey, Year of construction: 2015, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 6.621 kg Carrying capacity: 32.379 kg Ncjdpfx Aozggtusgpju GVW: 39.000 kg Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), mileage: 179,560 km, power: 382 kW (519.37 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 750 l, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 6,510 mm, total width: 2,530 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, onboard computer, parking heater, power assisted steering, power mirror, spoiler, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum fuel tank - Automatic headlights - Brake booster - Sunroof - Roof spoiler - Differential lock - Euro 6 - Remote central locking - Adjustable steering wheel - Air conditioning - LED daytime running lights - Leather steering wheel - Air suspension - Front center armrest - Rain sensor - Sleeper cab - Sun visor - Stability control - Auxiliary heater = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Transmission: OPTIDRIVER, 12 gears, automatic Axle Configuration Front axle: Max. axle load: 8000 kg; steered Rear axle 1: Lift axle; Max. axle load: 7500 kg; steered Rear axle 2: Dual tires; Differential lock; Max. axle load: 11500 kg Weights Unladen weight: 8,748 kg Nsdpfx Aszghhasgpjcu Payload: 18,252 kg GVW: 27,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 02/2027 Technical condition: good Optical condition: good Identification License plate: 38-BRD-1

Condition: used, Year of construction: 1961, sheet width 1020 mm plate thickness 2 mm Nsdpfxozfax Is Agpecu

Condition: excellent (used), Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel Ncedjzdup Ejpfx Agpeu -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available Price: per piece -Dimensions: 5460/2090/H2180 mm -Weight: 2180 kg

Condition: good (used), Here, we offer you a vibration testing system. Test Manager SWR 900 Control cabinet SWS 200-10 Vibration exciter SW 1508/1 Nsdpfjzdta Nox Agpecu Hydraulic power supply SWT 1110/11 Power amplifier TGA Soundproof enclosure SWG 211/1 Blower SWG 103 Operating hours: approx. 1,300 hours Condition: used Scope of delivery: Vibration testing system as shown in the picture (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, axle configuration: 3 axles, first registration: 05/2003, total length: 11,300 mm, total width: 2,500 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Notes = Number of axles: 3, Unladen weight: 6,500 kg, Gross weight: 34,000 kg, Chassis type: Incomplete chassis, Chassis material: aluminum, Kingpin size: 2 inch, Alloy wheels, Suspension type: air suspension, ABS, EBS, Body year: 2003, Body material: aluminum, Sidewall material: insulated, Drum volume: 34,000, Type of load: heated liquids, Axle type: SAF, 32,000 LITER OIL = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; tyre tread right: 9 mm Axle 2: Tyre tread left: 11 mm; tyre tread right: 11 mm Axle 3: Tyre tread left: 9 mm; tyre tread right: 10 mm Weights Unladen weight: 6,500 kg Payload: 27,500 kg Gross vehicle weight: 34,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers for used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock Nsdpsyyli Dofx Agpjcu • Recognizable quality • Good prices • Fair trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The safety of 'recognizable quality' • And much more.... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 05/2003, total length: 11,100 mm, total width: 2,500 mm, total height: 3,700 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, Unladen weight: 6,200 kg, Gross weight: 34,000 kg, Chassis type: Incomplete chassis, Chassis material: Aluminium, Kingpin size: 2 inch, Alloy wheels, Suspension type: Air suspension, ABS, EBS, Year of body: 2003, Body material: Stainless steel, Side wall material: Insulated, Drum volume: 30, Drum volume in: m³, Compartment configuration: 1 compartment, Load type: Heated liquids, Axle type: SAF, Bitumen 30,000 liters = Further Information = General Information Cab: Day Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 7 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 5 mm; Tire tread right: 5 mm Axle 3: Tire tread left: 6 mm; Tire tread right: 8 mm Weights Curb weight: 6,200 kg Payload: 27,800 kg Gross vehicle weight: 34,000 kg Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy at Kleyn Trucks? It's simple! Ncedpfxey Ad Sco Agpou • Large, rapidly changing stock • Recognizable quality • A fair price • Honest dealings • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Professional technical services • The assurance of “recognizable quality” • And much more.... Please visit our website for special offers and complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request on our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 05/2005, total length: 11,100 mm, total width: 2,450 mm, total height: 3,750 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Equipment = - EBS = Notes = Number of axles: 3, Unladen weight: 6,400 kg, Gross vehicle weight: 34,000 kg, Chassis type: Incomplete chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of body: 2005, Body material: Aluminum, Side wall material: insulated, Drum capacity: 30,000, Drum volume unit: liters, Compartment division: 1 compartment, Type of load: heated liquids, Axle type: BPW, BITUMEN 30,000 LITERS = More Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 14 mm; Tire tread right: 14 mm Axle 2: Tire tread left: 6 mm; Tire tread right: 9 mm Axle 3: Tire tread left: 14 mm; Tire tread right: 14 mm Weights Unladen weight: 6,400 kg Payload: 27,600 kg Gross weight: 34,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering covers all European brands, model years, and price ranges. Why buy at Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognizable quality • Competitive pricing • Proper business conduct • Multilingual support • We understand our customers • Assistance with import and transport • (Export) registrations arranged quickly • Expert technical services • The security of 'recognizable quality' Nsdoywr E Tepfx Agpecu • And more.... Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly for our European warranty package.

Condition: good (used), mileage: 738,118 km, power: 221 kW (300.48 HP), first registration: 01/2007, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 5,600 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: air, Year of construction: 2007, = Additional Options and Accessories = - Sun visor = Notes = Volvo FM300 4x2 - Livestock, 1 deck - Euro 4 - I-Shift Model Year: 2007 Mileage: 738,118 km VIN: YV2JL40A77A646402 Livestock box Full air suspension Euro 4 = Further Information = Transmission: I-Shift, Automatic Suspension: Air suspension Nsdpfezgtdyjx Agpocu Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle: Tire size: 315/70R22.5; Dual tires; Tire tread depth left (inner): 40%; Tire tread depth left (outer): 40%; Tire tread depth right (inner): 40%; Tire tread depth right (outer): 40% Number of cylinders: 6 GVWR: 18,000 kg Technical condition: good Optical condition: good

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00621, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: R-30iB Mate, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-10iA manufactured in 2013.12. The robot comes with an R-30iB Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-10iA Model Number: A05B-1221-B402 Year of Manufacture Robot: 2013.12 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 1420 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 130   Controller: R-30iB Mate Year of Manufacture Cabinet: 2013.12 Ncsdpozdrpvefx Agpju RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10