Used Batch Washer for sale (2,433)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Isdpfx Agefz Dvcj Uoic The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. Iisdpjfz I Hxsfx Ag Uec The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Iijdpfsfz I N Tex Ag Ujc

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. Iedjfz Nblepfx Ag Usic • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Ijdpfx Agsf Aaals Ueic • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Iiodpfjfz Aw Hex Ag Ujc In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Iiedpofz Dtzefx Ag Uec

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. Ijdpfxjfy T Rce Ag Usic The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: black, operation weight: 500 kg, maximum load weight: 800 kg, lifting height: 3,800 mm, axle configuration: 2 axles, Year of construction: 2024, machine/vehicle number: WD1-800, WD1-800 Twin Shaft Mixer with Unloading – Leg Height 3800 mm Remote Control --- Technical Data: Model: WD1-800 Twin Shaft Mixer Batch Volume: 500 L Capacity: 800 L Efficiency: 25 m³/h Aggregate Size: 60–80 mm Paw Rotation Speed: 26 rpm Number of Mixing Paddles: 2 × 7 Mixing Motor Power: 18.5 kW Winch Motor Power: 5.5 kW Water Pump Power: 1.1 kW Basket Lifting Speed: 18 m/min Unloading Height: 3800 mm Dimensions: 4900 × 2900 × 4200 mm --- Equipment: Mixer reducer Mixing motor Winch reducer Winch motor Lubricating system - oil pump Water pump Internal coating Pneumatic discharge Frame Supporting structure - steel legs Unloading basket Platform Lifting track Handrail Ladder Iiedpfx Aov H D S Esg Ujc

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 159 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 8/18-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 8/18-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 400 - 800 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 5.5 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 159 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M Iiodpfxsy Tw Hbo Ag Uoc NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: used, functionality: fully functional, Year of construction: 1993, Mobile concrete batching plant/continuous mixer Manufacturer: SAE Type: SAM 230 2-shaft mixer Feeding hopper/doser with discharge belt Control system Iiedpfxey Hf Sro Ag Usc 1 x 50 t cement silo with screw conveyor

Year of construction: 2025, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning machine type L102 automatically working hot water parts washer with basket drive by means of a 2 stainless steel washing pumps (Lowara), 2 rotating 3-sided spraying systems. spray systems. - basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 200 kg - spraying pressure: 2x 3 bar - tank capacity: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) Iijdshymmgepfx Ag Uoc complete cleaning machine (interior and exterior) in stainless steel 1.4301 manufactured water circulation and loading basket made of stainless steel 1.4301 bath cover with fine filter (2.000 micron) 2 pcs. suction filter as pump protection steam vapor extraction incl. condensate recirculation it is an exhibition machine from Glogar Technology Center.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 200 kg Iodpfxjc S Tlae Ag Ueic - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg Washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 insulation of the complete system (tank and cabin) made of stainless steel 1.4301 mechanical lid lock bath cover with fine filter (2.000 micron) 2 pcs. suction filter as pump protection operating hours counter Steam vapor extraction incl. condensate recirculation Oil skimmer for bath maintenance Insulation of the complete system Parts washer is as good as new (test plant/technical center) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L90 automatic working hot water part washing machine with basket drive by gear motor, stainless steel washing pump (Fab. Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - maximum loading weight: 150 kg Iiedpfxed H Slaj Ag Usc - Spray pressure: 3 bar - Tank volume: 105 litres - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900h mm Kerb weight: approx. 220 kg Wash timer freely adjustable (minutes and hours) complete cleaning machine (interior and exterior cladding) made in stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bathroom cover with fine filter (2,000 micron) Intake filter as pump protection Oil skimmer for bath maintenance Operating hour counter Steam swath extraction incl. condensate recirculation Part washer is as good as new (test plant/technical plant) OTHER KORBDIMENSIONS ON REQUEST !!! AVAILABLE

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH MOBICOM 45 mobile concrete mixing plant is an innovative production solution that combines high performance with a compact design. With its structure requiring minimal preparation time and low installation costs on construction sites, it is an excellent choice for projects that frequently change locations. All equipment is designed to fit into a single 40 ft container, eliminating the need for extra permits or special equipment for road transport. Quick setup is possible without the need for a mobile crane, and the plant can be easily transported to different construction sites with the help of a truck. The mixer's position close to ground level allows the produced concrete to be transferred directly to the transit mixer via a conveyor belt. MOBICOM 45 can be equipped with pan, single-shaft, or planetary mixer options according to user needs. The low feed height of the aggregate bunker allows the bucket to fill directly without a ramp. The advanced automation system is supported by SIEMENS and SCHNEIDER branded electronic components, and the entire production process is precisely controlled by advanced PLC-based software. It can be used with a cement silo or a bagged cement system, ensuring full compatibility with different production scenarios. Mobicom 45 – Mobile Concrete Batching Plant Technical Specifications Production Capacity: 45 m³/h Transport Position Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 9.5 tons Total Motor Power: 55 kW Required Electric Generator: 80 kVA Mixer Options: Pan – Single Shaft – Planetary Required Operating Area: 200 m² Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 1 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.75 m³ Cement Weighing Bunker: 450 kg Water Weighing Bin: 300 liters Iiodpoxqaavjfx Ag Usc Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo: Options ranging from 50 to 200 tons Control Type: Fully Automatic Why Should You Choose the Mobicom 45 Mobile Concrete Batch Plant? At CONSTMACH, we prioritize quality, speed, and reliability in concrete production. MOBICOM 45 can be set up quickly on your construction site thanks to its compact design and reduces your production costs with its high efficiency. Its dimensions, which comply with international transportation standards, allow for easy transport between projects. It guarantees maximum performance with its long-lasting material quality, automation technology, and low maintenance requirements. With the CONSTMACH guarantee, you gain not just a machine, but a professional solution that increases continuity and profitability in production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Iiedsxqgy Nepfx Ag Ujc Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: hybrid, color: other, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Electric Generator Requirement: Varies according to production capacity Iodpfx Ajxqai Rsg Usic Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH spiral sand washers are reliable systems that offer high efficiency in separating and cleaning fine materials that need to be washed. These machines are designed to effectively clean gravel, sand, or crushed stone containing large amounts of clay, dust, and dirt. Thanks to their heavy-duty steel construction, they provide long-lasting performance even under harsh working conditions. Their durable body, wear-resistant structure, and easily replaceable spare parts minimize maintenance costs. Constmach spiral washers are manufactured with high-quality materials and superior engineering design, ensuring trouble-free operation in both stationary and mobile facilities. They adapt to different production needs with single or double shaft configuration options. Furthermore, the specially designed gearbox and replaceable rubber boots enable long-term, quiet, and efficient operation. Its simple assembly structure makes installation easy and allows for quick commissioning. Screw Washer Technical Specifications Model: CSW-50 Dimensions: Φ 500 x 5,000 Motor Power: 4 kW Capacity: 25 – 45 m³/hour Rotation Speed: 24 rpm Iijdpfx Ajxp Urqjg Uec Water Requirement: 25 – 45 m³/hour Weight: 2,800 kg Model: CSW-60 Dimensions: Φ 600 x 6,000 Motor Power: 2 x 5.5 kW Capacity: 40 – 75 m³/hour Rotation Speed: 20 rpm Water Requirement: 35 – 55 m³/hour Weight: 5,200 kg Model: CSW-75 Dimensions: Φ 750 x 7,500 Motor Power: 2 x 7.5 kW Capacity: 45 – 80 m³/hour Rotation Speed: 20 rpm Water Requirement: 40 – 60 m³/hour Weight: 5,800 kg Model: CSW-80 Dimensions: Φ 800 x 8,000 Motor Power: 2 x 11 kW Capacity: 50 – 90 m³/hour Rotation Speed: 20 rpm Water Requirement: 45 – 65 m³/hour Weight: 6,250 kg Why Choose a CONSTMACH Spiral Sand Washer? Constmach manufactures high-performance, low-maintenance, and durable machines with years of experience in the concrete and aggregate industry. Our helical sand washers combine quality with long-term usage assurance. Each of our European standard-manufactured equipment ensures energy savings with optimal efficiency. We also maximize user satisfaction with after-sales technical support and fast spare parts supply. For professionals seeking superior engineering, reliable performance, and long-lasting use, CONSTMACH spiral sand washers are the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Isdpfx Agjtrbrqs Uoic

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel Iisdpfx Asvl Huasg Ujc

Condition: used, Year of construction: 2011, Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  Capacity: 1,500 – 2,500 crates/h (adjustable) Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h Crates in machine: 48 pieces Crate format: customizable Running direction: transverse Spray pressure: approx. 4.0 bar Lye tank volume: approx. 1.0 m³ Treatment section length: approx. 34 meters Main pump: 15 kW, 80 m³/h Drive units: Main drive: 0.33 kW Crate infeed: 0.55 kW Crate outfeed: 0.55 kW Dimensions: Length: 3,000 mm Width: 2,000 mm Height: approx. 5,000 mm Crate infeed height: 1,100 mm Crate outfeed height: 4,100 mm Weight: approx. 1,500 kg Water connections: Cleaning water inlet: R 1 1/4” Rinsing connection: R 3/4” Construction: stainless steel (except drives) Control system: LOGO controller Electrical installation: per customer specification Scope of Delivery  Spiral crate washer (upper unit) Lower tank body Ijdpswu S Suofx Ag Ujic

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consumption: 3.25 – 3.38 m³/h at 60°C Power connection: 12.0 – 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Width of frame: 1725 mm Height: 2300 mm Iodpfx Agoxn A S Ne Ueic

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with standard bottle formats Ijdoyb Sxaspfx Ag Uoic

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Iedpsu H R Nnsfx Ag Uoic

Condition: used, Year of construction: 1992, Overview The Kettner crate washer, type WAH 26, was manufactured in 1992. With an output of up to 2,600 crates per hour, it is suitable for use in existing filling lines for cleaning beverage crates. Technical details  Manufacturer: Kettner - Sotec GmbH Model: WAH 26 Year of manufacture: 1992 Capacity: 2,600 crates/h Ijdsw N Nbuspfx Ag Usic