Used Beck Automation Ag B32 for sale (19,513)

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt Fgedpfx Aheibichovef - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Fjdpfx Ahexl A Edovsgf You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Bosch Rexroth Aluminum Profile Workstation Bosch Rexroth Aluminum Profile Complete plastic glazing Fgsdpjqbq E Eefx Ahvsf 4 cm worktop with a light gray melamine resin direct coating 190 x 90 cm Workstation dimensions W x D x H 195 x 93 x 220 cm Magnifying lamp 8062D2 More new and used items - find them in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2016, Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNN 3-Phase Synchronous PM-Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Fgsdpfxohufcle Ahvef Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used  Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Beck wall 1000/2000 suction wall Suction wall Type: Beck Wall 1000/2000 Exhaust wall made of steel plate, with 5 suction slots made of perforated plate evenly distributed. For connection to a central suction system via a suction connection piece at the top center of the suction wall. Cleaning opening unscrewable at the bottom front of the wall. Possible applications: Exhaustion of process air during grinding and milling operations Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes width: 1000 mm height: 2000 mm + 100 mm spigot Fgedpjk Shuhsfx Ahvof Depth: 300 mm Suction nozzle: NW 250 top center Recommended suction capacity: 3000 m3/h Painting: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer price: 2970,-€ Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Fedpfex Elkfex Ahvegf Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Model: MEDIMAT 711-45 Fgedpfex R Dfrex Ahvef Year : 2020 Type : Heat sealer / Sealing machine Maximum power : 8 kW Pressure : 6,0 - 8,0 bar Format : interchangeable sealing plate Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Documentation available

Condition: used, Year of construction: 1984, Manufacturer : Brogli + CO AG Fgodpfox R A Hujx Ahvsf Model: Multi-Homo 5 CI 2563 Type : Vacuum mixer Year: 1984 Materials in contact with product: stainless steel. Useful capacity: 5 L Total capacity: 6.8 L Jacket pressure: 1 bar Vessel pressure: vacuum / 0.5 bar

Condition: used, Year of construction: 1996, Manufacturer : Scholl AG Type : Process tank Year: 1996   Possibility of adding bottom stirrer: 1.5 KW motor and mounting for mixer available. > This service may be subject to an additional quotation   Materials: 1.4571 stainless steel (Aisi 316 Ti) Capacity: 480 litres Pressure: 0 bar Temperature: 150°C Mechanical opening and closing   Jacketed : Materials: 1.4301 stainless steel Pressure: 3 bars Temperature: 150°C Capacity: 61 L   Dimensions : Height: 135 cm Fgodpfx Ahsx R Ddnjvsf Diameter : 90 cm  

Condition: ready for operation (used), Table size: 900 x 500 x 550 mm height Electrical connection: 380 V Fgjdpfx Ahox Ebh Rovjf Required space: 1050 x 1050 x 1800 mm height Weight: 180 kg

Condition: new, Year of construction: 2024, - Frame and edge press, single-sided/stationary - Usable dimensions in mm as a frame press: 2630 x 1610 - Usable dimensions in mm as an edge press: 3000 x 1610 - External dimensions in mm: 3200 x 2090 x 730 - Sturdy frame welded construction made of thick-walled profile tubes and laser-cut steel sheet parts ensures a torsion-resistant and dimensionally accurate press frame (no screwed frame parts!) - With left-hand counter bearing, sliding carriage for width adjustment, central locking system, and 2 manual hydraulic press units with ergonomic handles. Fgjdpfx Ahshd Nywjvef - 3 roller-bearing, vertical pressure beams, type SK, made of thick-walled profile tube, galvanized, with manual hydraulic press units incl. ergonomic handle. 20,000 N pressing force, 60 mm stroke. Press units adjustable in a 50 mm hole grid. - Counter bearing at the bottom with safety lock, adjustable in 5 steps in the hole grid - Lower clamp with spindle pressure - Chassis with 4 swivel casters (2 with brakes) - Powder-coated (glue-resistant) gray-white RAL 9002, pressure plate and counter bearing cornflower blue RAL 5010 - The Quattra 1-SK version is equipped with a comfortable adjustment system for the manual hydraulic press units, providing additional safety for the operator.

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand Fgedpfxsr I Am Hj Ahvef NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D Fedpfx Aer Ix Igjhvjgf 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pumpe & Co. AG, manufactured in 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Serial number: T 200708 Year of manufacture: 2010 L/s: 2.77 1/min: 1800 m: 14.7 Connections: DN50 and DN65 Length: 182 cm Quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Serial number: 0883082001004H kW: 5.5 Fgedpfsgbflujx Ahvof V: 400 / 690 A: 11.8 / 6.85 1/min: 1425 Further data can be found on the nameplate.

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pump & Co. AG, manufactured in 2010. Pump data: Fgsdpegbflmofx Ahvef Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Serial number: T 202000 Year of manufacture: 2010 L/s: 2.77 1/min: 2390 m: 26.5 Connections: DN50 and DN65 Length: 192 cm Quantity: 1 Motor: Manufacturer: VEM motors GmbH Year of manufacture: 07/2010 Type: K21R 160M 2 FD TWS HW Serial number: 178086/0001 H kW: 11 HP: 15 V: 400 A: 20 1/min: 2900 Further data, see nameplate.

Condition: excellent (used), Year of construction: 2017, saw blade diameter: 600 mm, cutting height (max.): 200 mm, cutting width (max.): 800 mm, input voltage: 400 V, Technical specifications: - Maximum saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Motor power: 7.5 kW - Saw shaft speed: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar Fgodow Aqndjpfx Ahvsf - Net weight: approx. 520 kg - Required air flow: 1000 m³ / h - Voltage: 400 V / 50 Hz three-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Pneumatic feed for saw blade - Two-hand safety PLC control - Automatic motor brake - Set of operating spanners - Emergency stop button - Speed regulator for saw blade feed - Fixed vertical safety guard - Upper pneumatic safety pressure device (pneumatic safety cover) - Extraction speed at least 28 m / sec.

Condition: used, Static frequency converter Fgodpfohutxzox Ahvsf Manufacturer: GARBE LAHMEYER & Co. AG Type SU3760.2aFZ231 Year of manufacture: 1989 Serial No.: A2K 60229 0001 Rated power: 500 kVA Current type: D Mains voltage: 380 volts Input frequency: 50 Hz Input current: 760 amps Rated input current: 760 amps Output voltage: 380 volts Output frequency: 50 Hz Output current: 760 amps Rated output current: 760 amps - Control unit GARBE LAHMEYER, type AEB 60 Cabinet dimensions (W x H x D): 2250 x 800/900 x 2550 mm Transport dimensions (W x H x D): 2430 x 1100 x 2700 mm Weight: 1660 kg

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: Fedpfxexf Urpe Ahvegf 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Fgedpsxw Rdljfx Ahvef Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Fgsdsxrgvmopfx Ahvef Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Year of construction: 1980, condition: used, machine/vehicle number: 30245035, The offer here is a double shear table. The machine dates back to 1980 and has a lifting capacity of 4,000 kg. The lifting table has a driven runway system and has the XYZ function (lifting, process, etc). Fodpfogtmv Sox Ahvegf The advantage of double scissors is that they can achieve a high operating stroke when space is limited. The dimension is 8. 20 m long and 1. 20 m wide. The conveyor belt has a width of 80 cm and 10 cm roll diameter.

Condition: excellent (used), Year of construction: 2015, Massive Parquete production line Manifacturer - MICHAEL WEINIG AG / GMC SERVICE Year - 2015/2007 Capacity - 800m2/ shift Max Width of Parquet- 200 mm Fodpfsyzfr Uox Ahvjgf Max length of Parquet - 2.400 mm Complete line for production normal solid parquet ! On this line it is possible to produce different dimensions at the same time ! Kind of parquet - Herringbone 90 , Chevron 45/60 Condition - Exellent

Condition: not inspected (used), functionality: limited functionality, load capacity: 1,200 kg, lifting height: 2,800 mm, load center: 600 mm, Equipment Fgsdpfx Ahey Rh Uqevef • Electric drive for travel and lifting • Tiller control • Compact design, highly maneuverable • Ideal for pallets, beverage crates, production material Condition Unit is basically functional. Battery is defective and needs to be replaced or refurbished. Hydraulics, mast, and drive are functional based on last use. Significant signs of wear. Battery Industrial battery is present, but no longer operational. Ideal for buyers with their own battery or technical expertise.

Condition: used, icht 60 kg Min. Gewicht 0,4 kg Fgodpfx Ahoxyturovef

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Fgodpfxjg Uk Eij Ahvef Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames