Used Beer Fermenter for sale (302)

Condition: used, Year of construction: 2013, Overview  This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data  Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery  Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system   Djdpsymg Hiefx Abaokn

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release. The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Dksdsxxycyjpfx Abasn Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: used, This listing is for the Magellan Tandem Gas Analyser The unit is in full working condition and is ready for immediate use Here’s a summary of the Magellan / H.E.L Tandem Gas Analyser (especially the Tandem PRO model), based on available specs and user info. If you want comparison with similar units, or more in‑depth performance data, I can also pull that together. The Tandem (Standard) and Tandem PRO gas analysers are instruments by Magellan Instruments / H.E.L designed primarily for monitoring O₂ (oxygen) and CO₂ (carbon dioxide) in gas streams. They are often used in biological / fermentation / bioreactor / cell culture / metabolic flux settings where gas composition is a key parameter Dsdpfxexhdufj Abaskn

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Dkodpfx Aexl Dx Sjbaen Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. Djdpfxsxv Dv Es Abaokn The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Dodpjxhfg Nsfx Abaokn Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. Dkedpfx Abjxxx Ubeaen - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings.

Condition: used, This listing is for 1 of 2 BugLab BE2100 Biomass Sensor. The unit is in full working condition and is ready for immediate release. The BugLab BE2100 Biomass Sensor is an advanced, non-invasive sensor designed for real-time, in-situ monitoring of biomass concentration in bioreactors and fermenters. It is widely used in biopharmaceutical, biotechnology, and industrial fermentation applications to track microbial growth, providing valuable data for optimizing production processes. Key Features: Non-invasive: The BE2100 is designed to be used externally, which allows for real-time monitoring without the need to extract samples or disrupt the process. Real-time Biomass Monitoring: Provides continuous data on biomass concentration, enabling users to make on-the-fly adjustments to optimize growth conditions. Dksdpfxjxxz Uwo Abasn Compatible with Bioreactors and Fermenters: Can be easily integrated into most existing fermentation systems, making it a versatile tool for various bioprocesses. Optical Density Measurement: Measures the optical density of the culture, correlating the light scattering properties of cells in the growth medium with biomass concentration. User-Friendly Interface: The sensor provides instant feedback on the biomass concentration, helping operators monitor growth phases more accurately. Advantages: Sterility Maintained: Non-invasive design ensures that the process remains sterile, as there is no need to open or sample the bioreactor or fermenter. Accurate & Reliable: High precision measurements offer real-time insights into the biomass concentration, improving process efficiency. Low Maintenance: The external, non-contact design requires minimal maintenance, reducing operational downtime. Cost-effective: By providing real-time monitoring, the sensor can help avoid unnecessary batch failures, improving overall productivity and reducing costs.

Condition: used, This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features Advanced Steam Sterilization Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs GMP & Cleanroom Ready Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation Integrated Monitoring: Real-time cycle control with full batch documentation capability Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure Built-In Diagnostics: Self-check functions for preventive maintenance Technical Specifications The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). The chamber is constructed from AISI 316L stainless steel, ensuring corrosion resistance and compliance with GMP hygienic standards. A water-ring or liquid-ring vacuum pump enables pre-vacuum and post-vacuum phases for thorough air removal and effective drying. Door configurations can be single or double-door in either sliding or hinged formats, with safety interlocks to prevent opening under pressure. The autoclave requires standard utility connections for steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Applications Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers Biotechnology: Sterilization of fermentation vessels, culture media, and instruments Research Laboratories: Sterilization of glassware, tools, and lab consumables Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles System Components High-grade stainless steel chamber with polished finish Vacuum pump system for pre- and post-cycle air removal Steam generation and distribution system Control panel with PLC and HMI touchscreen Integrated temperature and pressure sensors for validation Quality & Compliance Manufactured in accordance with GMP guidelines Complies with EN 285 and ISO 17665 sterilization standards Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments Designed for integration into cleanroom and production facilities Benefits Dodpfx Abjxv Dvfoaskn Consistent, Validated Sterilization for a wide range of load types Flexible Confi...

Condition: used, This listing is for the This listing is for the Epindorf New Brunswick I/O Module The unit is in full working condition and is ready for immediate release The Eppendorf New Brunswick I/O Module is an analog input/output interface module designed to work with Eppendorf’s New Brunswick and bioprocess control systems. It provides a way to connect external sensors, actuators, and control devices to your laboratory process equipment to acquire analog signals and control external hardware. Analog Inputs & Outputs: The module accepts analog signals from external devices (such as sensors measuring temperature, flow, pH, etc.) and can output analog control signals to external actuators (like pumps or valves). Typical signal formats it supports include 0–5 V and 4–20 mA ranges, which are industry standards for process instrumentation Dksdpexwc Hlefx Abajn OPC Server Interface: It can interface with OPC-compatible software such as Eppendorf’s BioCommand® SCADA for real-time monitoring and advanced control. OPC (OLE for Process Control) is a standard communication protocol that lets control software talk to instrumentation hardware. Process Integration: By connecting to process control systems, it helps in monitoring and controlling bioprocess parameters during fermentation, cell culture, or other controlled experiments How It’s Used Laboratory and bioprocess engineers use this module to: Integrate external sensors and actuators with New Brunswick or BioFlo systems. Capture analog data (such as voltage or current tied to physical parameters). Provide control signals to devices like external pumps or valves based on process logic. Link equipment to process automation software for data logging or control strategies. Eppendorf Typical Features Although detailed manufacturer technical specs are limited in published catalogs, typical features include: Configurable input/output ranges (e.g., 0–5 V and 4–20 mA). Eppendorf Compatibility with OPC communication standards for integration with software like BioCommand. Eppendorf Robust lab design to handle use in controlled environments. QuestPair

Condition: used, This listing is for an Eppendorf BioFlo 320 Glass Vessel Bioreactor 5L SS Dished Bottom M1379-1001 The unit is in full working condition and is ready for immediate release Key Features Material: Autoclavable borosilicate glass vessel with a stainless steel headplate. Bottom Design: Dished stainless steel bottom for rapid heat transfer. Drive Options: Compatible with both magnetic and direct overhead drive systems. Impeller Options: Supports various impellers including Rushton, pitched blade, marine blade, spin filter, cell lift, and packed-bed impellers. Port Configuration: Multiple industry-standard headplate ports for flexibility in process design. Temperature Control: Suitable for both rapid and gentle temperature control processes.​ Applications This bioreactor is ideal for applications such as:​ Cell culture and microbiology research. Laboratory and pilot-scale fermentation of aerobic and anaerobic bacteria, yeasts, and fungi. Cultivation of mammalian, insect, and human cell lines. Specialized applications like stem cell culture or biofuel/biopolymer development. Packed-bed impeller use for vaccine production in anchorage and non-anchorage dependent cell lines. Dsdpfxjxv D Iho Abaskn Suitable for batch, fed-batch, and continuous processes. Validation packages available for GMP-regulated processes

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Determining cell concentration in fermentation or culture processes Dodpfxexup Nhs Abaekn Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. Dkjdpfsxhdqtjx Abaen It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled   Dkjdpsyk Ab Defx Abaen

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Djdsw Ahg Rjpfx Abajkn Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: used, Year of construction: 2004, machine/vehicle number: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Djdpfx Aox H Tf Tsbaokn Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts. When supplied refurbished, a 6-month warranty is available, offering confidence in performance and longevity for second hand indus...

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ... Dodpfxsx H Tgdo Abaekn

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functional drinks Filling system: isobaric probe filling with electronic level control Fill range: 12 oz – 24 oz containers Labeling system: cold glue labeling Bottle detection: integrated bottle burst detection system Construction: all stainless steel, high-hygiene design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) Note: frequency / voltage converter required for non-US markets Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Bottle Conveyors | KOSME | – | Included | 2015 Additional Information Manuals included Basic tooling and format change parts for 12 oz and 22 oz included Additional documentation available upon request All conveyance lines included Dismantling team available to supervise reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available upon request Dkjdpjyigigsfx Abaon

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Glass Bottle Crusher is ideal for crushing empty glass bottles and glasses in catering business and other bottling companies. It is also used in factories with glass waste issues. You can crush up to 100 glass beer bottles per minute. The glass bottle crusher impresses with its ease of use, safe operation and the spacious filling chamber. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Machine size: 1850 H x 965 W x 832 D mm Machine weight: 315 kg Transport height: 1850 mm Volume reduction: up to 80 % Loading aperture: 481 W x 337 H mm Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) User-friendly, safe and easy to operate Reduces the frequency of daily/weekly glass waste collections Suitable for up to 240 Ltr. wheelie bins Small footprint Volume reduction of up to 80% from bottles to cullet A quality product “Made in Europe” Suitable for crushing Glass bottles Glasses Other small glass containers Optional extras Machine colour RAL Dsdsykbispfx Abaskn Machine galvanised

Year of construction: 2025, operating hours: 1,050 h, condition: reconditioned (used), functionality: fully functional, Alzinger Lepton 5100 – Solution for the Bio-waste Ordinance (BioAbfV) Ideal for organic waste separation: Easily meet the statutory 1% threshold! From May 2025, organic waste may only be treated if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation instead of Shredding - Gentle Bag Opening: Waste bags are reliably opened without shredding the contents. A pre-shredder (slow-speed) is not required! - Maximum Film Size: Plastic films remain largely intact and are efficiently removed during the first screening process, before they can fragment in the compost windrow due to turning, heat, and UV exposure. - Highest Purity: Prevents microplastics in the process and ensures high end-product quality. Economic Efficiency: - Legal Compliance: Reliably stay below the 1% threshold required by the BioAbfV. - Process Optimization: Reduced effort in post-cleaning. - Cost Efficiency: Significant savings on diesel and wear costs since no pre-shredder is necessary. - Integrated Air Separator: No need for bulky auxiliary machines. Saves space and maintenance costs. Innovative Process (Flexibly Controllable): - Organic Waste Processing (2-fraction mode): Reversible mid-size discharge belt brings together medium and fine fractions for a homogeneous mix. Result: Clean target fraction for digestion/composting plus coarse fraction with films/contaminants. - Compost Refinement (3-fraction mode): Separation into premium compost, structural material, and energy wood. The ballistic separation effect removes stones, glass, and hard plastics via the stone fraction belt. Integrated air separators remove any remaining film residues. Current Application: Successful organic waste processing for wet digestion. The machine delivers a contaminant-free, homogeneous fraction for the fermenter, preventing the formation of sink or floating layers. Inspection & Demonstration: Live demonstration available at our partner facility in the Kelheim district. Processing steps can be discussed directly with the plant operator. Technical Data: - Model: Lepton 5100 | Year of manufacture: 2025 | Approx. 1,050 operating hours - Location: D-84069 Schierling | Availability: Short notice - Screen Decks: Deck 1 (52mm), Deck 2 (43mm) - Equipment: Variable dosing roller, volume measurement, air separator preparation, compressor, LED lighting package, radio remote control. - Drive: Diesel-electric (Perkins 58kW, no AdBlue) + external power supply option (400V 63A). - Transport Dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). - Screening Materials: Compost, green waste, biomass, wood, municipal waste, RDF. Dodpfsy Elwfox Abajkn - Condition: Very good, fully operational. The machine will be completely overhauled by us before sale.

Condition: new, mileage: 28 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,195 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good-value vehicle with a fully traceable service history from our company! NEW MAN TGM 26.320 with certified Orten KETTLINER body and 4-row rear load securing Orten KETTLINER Body * Certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing tracks * Large foldable side steps * Liftable trailing axle with steering * Automatic transmission * Air conditioning * Cruise control * Heated seat * Spoiler * Sun visor * Differential lock * Full air suspension * Attention, blind spot, reversing and crosswind assistant * Euro 6, green emissions sticker GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration and export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING On request, we will be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING OFFER. Dsdpsx Iy Rfsfx Abaokn SERVICE TÜV main inspection / UVV tail lift inspection / LGS test / tachograph check / installation of OBU (on-board unit) and service through our AUTHORIZED WORKSHOP on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale according to our terms and conditions. The information provided online is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: new, mileage: 28 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,195 mm, Equipment: ABS, air conditioning, navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a good-value vehicle with a fully traceable service history from our company! NEW MAN TGM 26.320 with certified Orten KETTLINER body and 4-row rear load securing Orten KETTLINER Body Dkjdpox Iy N Uofx Abaon * Certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Chemical certificate (IBC) * 2,500 kg Bär tail lift * 4 rows of load securing tracks * Large foldable side steps * Liftable trailing axle with steering * Automatic transmission * Air conditioning * Cruise control * Heated seat * Spoiler * Sun visor * Differential lock * Full air suspension * Attention, blind spot, reversing and crosswind assistant * Euro 6, green emissions sticker GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration and export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING On request, we will be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING OFFER. SERVICE TÜV main inspection / UVV tail lift inspection / LGS test / tachograph check / installation of OBU (on-board unit) and service through our AUTHORIZED WORKSHOP on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. TRAVEL / DISTANCES Wittlich train station: 500 m Frankfurt Airport: 150 km Frankfurt-Hahn Airport: 40 km Luxembourg Airport: 75 km Sale according to our terms and conditions. The information provided online is a non-binding description and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Manufacturer: Krones Model: VK2V 050-113-KK10 Dksdpfxjyzhkye Abaon Capacity: 19,000 bottles/hour Equipment: Beer in 0.5 l glass bottle Year of manufacture: 1991 Feeding system: Bloc Direction of operation: right to left Filler: VK2V 050-113 Filler pitch: 113 mm Filling stations: 50 units Execution: Height adjustment of filling bowl, automatic bottle shards rinsing, mechanical filling system, bottle shower, HDE Capper: Crown capper 10-113 Execution: Height adjustment of capper head

Condition: used, Year of construction: 2009, Overview This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides.   Technical data  year of manufacture: 2009 capacity 60/min  adjusted formats: 1,5L PET (2x(3x2)) operation: film only  application: water, beer, CSD condition: very good, still connected  Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available  Dodpfeydkblex Abaekn

Condition: used, Year of construction: 2010, Overview This cold glue labelling machine was manufactured in 2010 by the Italian company Kosme S.r.l. The model Extrafix 504/6 SC2 E3 is designed for labelling of glass beer bottles using cold glue technology. The machine was in production until January 2025, is now stored and ready for shipment, and remains in good operational condition. Technical data  Capacity: 6,000 bottles per hour Formats: 0.33 L (long-neck bottles) Neck finish: 26 mm crown cork Label Type: Cold glue (paper labels) Status: Stored, ready for shipment Condition: Previously in production until January 2025 Dksdpsxn T Nfofx Abaon