Used Bottle Filler And Capper for sale (7,560)

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Bsdpfxovxtavj Amijlh

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Bodpfx Aovrfivsmislh

Condition: used, Year of construction: 2005, Overview  This semi-automatic filling and capping machine was manufactured in 2005 by the Italian company Officine Pesce. It was previously used in wine production and is now for sale due to lack of use. Technical data  Manufacturer: Officine Pesce S.n.c. Model: PG 97/M4 Year: 2005 Voltage: 220V Frequency: 50Hz Filling system: Semi-automatic Components: Accumulation tank Filling tap Electromechanical valve Bottle-holding plates Capping unit Control panel Pedal-operated mechanism Bodpfx Aewbanqjmijlh

Condition: used, Year of construction: 2004, Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temperature deviation Automatic speed adjustment based on bottle infeed CO₂ pre-flushing of bottles Inert gas overlay possible in the filler bowl Auto fill level control depending on product temperature Auto wine changeover via CIP tray CIP dummy bottles and semi-automatic cleaning program Remote maintenance modem Complete documentation (spare parts list, wiring diagram) Central electric fill level adjustment Scope of Delivery  MBF Fillmatic 36LV Filler CIP dummy bottles CIP tray Tele-Modem Complete documentation (electrical and spare parts) Bodpfx Ajwiu Nlomislh

Condition: used, Year of construction: 2010, Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Capacity: Up to 600 bags/hour (depending on product viscosity and format) Volume range: 0.5L – 3L Pressure: min. 6 bar Bag type: Doypack with screw cap Filling principle: Gear pump with high-precision flowmeter Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Frame: Stainless steel Cleaning/Sterilization: Integrated cleaning and sterilization functions Control panel: Touch screen Scope of Delivery  AIT DOYPACK semi-automatic filling and capping machine Integrated gear pump and flowmeter Touch screen control panel Blsdpjwiu Hkjfx Amijh

Condition: used, Year of construction: 2018, Overview This atmospheric filling machine was manufactured by Alfatek in 2018 and is designed for filling 330 ml bottles with crown caps. The machine achieves an output of 800-1,000 bottles per hour and was last used for beer filling. Technical details  Filling principle: Atmospheric Output: 800-1,000 bottles/hour Bottle format: 330ml Capper: 26mm crown cap Bjdpfx Aev Rq Dpomijlh

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pick&Place neckhandling system Integrated foaming system Neumo butterfly valves Blodpfjwiizpsx Amioh

Condition: used, Year of construction: 2015, Overview The Kosme / Krones Barifill is an isobaric filler that is currently in operation in a German brewery and can be seen in operation. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour and the rated speed of the manufacturer is 7,000 bph. The system is designed for 26 mm crown corks and has 30 filling stations. Technical details  Output: 8,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0,5 NRW 0,5 Longneck 0,5 Lochmund 0,33 ALE 0,33 SUD 0,33 Steinie Bügel Filling stations: 30 Electrical specifications: Max. Voltage: 3x400 V + N + GND 50Hz Power consumption: 13,00 kW Operating hours: 18393 (March 2025) Spare parts included: Drives Gearboxes Cardan Shaft others Serviced by Kosme/Krones each year Lifting cylinders in 2024 Valves and capper in 2025 Features: Bottle shower High pressure injection for foaming Bottle stopper Table flushing Bunker for crown caps Bodpfxsv Ic Uzj Amiolh

Condition: used, Year of construction: 2004, Overview The empty bottle inspector was built in 2004 by the German manufacturer Miho, designed for quality control in filling lines. The machine was running until January 2025 and is now stored in the company. Technical details Output: 25,000 bph Working direction: Left - right Last used for: 330 ml Longneck glass bottles (green) 330 ml Longneck glass bottles (brown) 330 ml Steinie glass bottles 330 ml Swing top glass bottles 500 ml NRW glass bottles Inspection modules Bottom inspection Sealing surface inspection Side wall inspection Residual liquid and residual caustic detection Blsdpfx Amewhv T Ajioh

Condition: used, Year of construction: 2016, Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  Filling valves: 10 Filling principle: Atmospheric Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Closure: 26mm crown cap Output: 1,500 bottles/hour Bljdpfx Asv Nhwkjmioh

Condition: used, Year of construction: 2011, Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min. 120 mm, max. 300 mm Bottle height: 250-400 mm Direction of rotation: clockwise Power consumption: 3.5 kW Dimensions: 4,000 x 3,000 x 3,500 mm Weight: 2,500 kg Rotary labeling machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 Output: 3,000 bottles/hour Dimensions: 2,750 x 1,700 x 1,780 mm Weight: 3,500 kg Pallet wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 Capacity: 35 pallets/hour Type: Turntable Control system: PLC Max. Pallet weight: 2,000 kg Semi-automatic Dimensions: 2,439 x 1,500 x 2,580 mm Weight: 1,200 kg   Bodpfx Amev E Haijiolh

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and operator panel Bottle clamping star wheels CIP cups High-pressure injection (HDE) Bottle shower at discharge Bottle table in roof optic Central lubrication system VPN remote access capability Safety housing (updated in 2016, with flushing system) Touch panel Cork feeding unit by NSM Filling level inspection system: Krones Checkmat (2015) Bljdpfx Amswif Dgsioh

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Blodpfewh U Avox Amish

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Bodpfjwhvc Rjx Amijlh

Condition: used, Year of construction: 1994, Overview This Solo Screw Capper was manufactured in 1994 by French company Zalkin. The machine was used to apply plastic caps on 75cl cider glass bottles with a capacity of up to 9,000 bottles per hour. It is immediately available as the production at the previous facility was stopped in 2022. The cap hopper pneumatic system is included. Technical data  Capacity: up to 9,000 bph Formats: 75cl cider glass bottles Dimensions: L.220 cm x W.150 cm x H.320 cm Scope of Delivery  Zalkin CA6 Solo Screw Capper Cap hopper with pneumatic system Bedpfxewhkq Nj Amijlh

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Blsdpfowg E D Iex Amioh

Condition: used, Year of construction: 2016, Overview  This isobaric triblock bottling machine was manufactured in 2016 by the Italian company Rizzolio. It is designed for the bottling of carbonated beverages and combines rinsing, filling, and capping in one compact unit. The machine is still installed, can be connected to demonstrate basic functionality, and is available for sale due to the owner's need for a larger brewhouse. Technical data  Capacity: approx. 500–650 bph (bottles per hour) Formats: Bottle diameter: 30 to 120 mm Bottle height: 140 to 350 mm Caps: 26 or 29 mm crown caps Filling Type: Counter-pressure / isobaric Rinsing heads: 4 Filling valves: 4 Capping unit: 1 Power: 0.75 kW Voltage: 240V, 50Hz, single phase Approx. dimensions Length: 1370–1410 mm Depth: 640 mm Height: 2100 mm Blodjwfh D Iepfx Amish

Condition: used, Year of construction: 1991, Overview This isobaric PET bottle filling and capping machine was manufactured in 1991 by German company SEN AG (Seitz Enzinger Noll AG). The block machine includes an Zalkin capping machine for screw caps and a cap feeding system from Gassner. It is suitable for carbonated soft drinks. The machine is out of production but still connected.  Technical data  filling and capping machine as a block system number of filling stations: 124 number of capping stations: 20 isobaric filling system suitable to carbonated soft drinks capping system: Zalkin for screw caps  cap feeding system: Gassner  capacity: 19.900/h at 1,5L formats: 1,5L PET and 0,5L PET   direction: left-right  Bsdjy Scclopfx Amijlh

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data Capacity: 212 ml round plastic: up to 2,700 bph 250 ml oval plastic: up to 2,700 bph 1,000 ml round plastic: up to 900 bph 1,000 ml oval plastic: up to 900 bph Application: Glass & PEHD (plastic) Neck finish: Screw-on caps Ø 30–40 mm Twist-off caps Formats: 212 ml, 250 ml, 1,000 ml Scope of Delivery  Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min Conveyor | Breitner | TP 6052 | 2006 | — Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min Rotary Sorter | Breitner | DS 8003 | 2006 | — Feeder | Breitner | SFB 8001 | 2006 | — Conveyor | Breitner | TPK 6042 | 2006 | — Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min Conveyor | Breitner | TPE 6032 | 2006 | — Bljdsyighiopfx Amish

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Bjdpfx Amsy Rmfbjielh

Condition: used, Year of construction: 1999, Cone Ice Cream Filler — Machine Description This industrial Cone Ice Cream Filler is a purpose-built, high-efficiency production machine engineered for automatic filling of pre-formed ice cream cones. Designed for use in commercial frozen dessert facilities, the system delivers precise, hygienic portioning and consistent presentation, even with soft-serve, artisan, or premium ice cream products. Constructed with robust, food-grade stainless steel and sanitary components, the machine supports continuous high-speed operation while ensuring optimal product handling. The precision dosing mechanism gently fills each cone to the exact weight or volume specification, minimizing giveaway and reducing waste. Featuring a smooth indexing conveyor and adjustable fill heads, this filler is ideal for both medium and large-scale production lines. Its design integrates easily into existing workflows and can be paired with complementary packaging equipment such as automated cone stackers, cooling tunnels, or wrappers. Key Features - Automatic cone handling — accepts cones from feeding system and indexes them into fill position - Accurate, low-shear dosing — fills each cone consistently while preserving ice cream texture - Adjustable fill depth & speed — easily adapts to different cone sizes and product types - Food-grade stainless construction — designed for hygiene, cleanability, and long service life - Modular integration — compatible with upstream and downstream automation - User-friendly controls — intuitive interface for quick changeovers and production adjustment This cone ice cream filler is ideal for manufacturers seeking reliable performance, high throughput, and consistent portion accuracy in commercial production of cone-style frozen desserts. Outlet Capacity : 4000 pcs per hour Blodpfjynr Dvex Amieh Filling: Main filler Granular: Available Sirup Filler: Available Paper top applicator: Available Drop off conveyor: Available Condition: Good Available: Immediately

Year of construction: 2010, condition: used, Technical details: Bodpfxeu Nvk No Amijlh lifting capacity: 10 t weight of the machine approx.: 98 kg dimensions L x W x H: 0,8x0,4x0,2 m as good as new, crane hoist with hook (hook strains) - number of strains: - classification: 1 AM DIN 15020 FEM 9.511 *

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. Bedpfoy R I Uqsx Amiolh ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection.

Year of construction: 2024, condition: used, New: Yes Empty weight: 35 kg Dimensions of cargo space: 51 x 20 x 85 cm Serial number: 9305082 Please contact Team DPX for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Bljdpsyaf Sqefx Amijh Completely wired 2 units available

Condition: used, Please contact Team DPX for more information Bedpfexpcwhex Amijlh Beschikbare containers: Available containers: DPX-29037 - 20FT USED 2011 silent container - €12.500,- (photo 1) DPX-29040 - 20FT NEW 2015 silent container - €15.00,- (photo 2) DPX-29046 - 20FT NEW 2015 silent container - €15.000,- (photo 3) DPX-29048 - 40FT HC NEW 2017 silent container - €18.500,- (photo 4) DPX-29049 - 40FT HC NEW 2017 silent container - €18.500,- (photo 5) DPX-29050 - 40FT HC NEW 2023 silent container - €25.000,- (photo 6) DPX-29081 - 40FT HC USED 2008 silent container - €15.000,- (photo 7)