Used Bts- Bts-Tyre Packing Machine Gen.2 for sale (114,383)

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, air pressure: 6 bar, The principle of operation off the model PC40 machine is based on the automatic distribution, uninterrupted transfer and rotation of the parts which are visually inspected by two operators. The machine works according to the principle of uninterrupted kinematics, with the following advantage: 1. Uninterrupted transfer and rotation of the parts 2. Very limited wear of mechanical parts as the motion is continuous and without jerks. The products are automatically transferred one by one onto a driving chain fitted with dogs and an inclined place. The products rotate past two operators, sitting side by side. These operators check the products and remove manually those which they consider as defective. The other products are discharged into a box at the end of the chain. Isdpfjyx Saysx Am Ejtf Feeding is ensured by automatic systems, Model AS-PC Workstation components: 2 machine workstations, A driving chain fitted with dogs ensures uninterrupted transfer of the products in front of the two operators. Workstation additional equipment: Normal discharge system for defective products after each visual inspection station. An emergency stop safety device. Four (4) mirrors for inspection of the products from particular angles, at the front and at the rear of the chain fitted with dogs

Condition: used, Year of construction: 2001, machine/vehicle number: 700643, 2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280BBaujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Iedpfsh Axx Hsx Am Eotf Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Isdpfx Asn Apntom Ejtf

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 Iodpfx Aexn Rz Ejm Ejtf 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: good (used), Year of construction: 2004, REF: MM5684 1 x Sorma Group automatic punnet netting machine.  Model - PK10 112SB. Date of manufacture - 2004.  Iedot Evdtspfx Am Ejtf Speed - up to 55 punnets/minute.  Weight of individual punnets - between 500g and 2000g.  Overall dimensions - 3425mm L x 905mm W x 1500mm H.  Machine weight - 420kg.  Previously used for netting punnets whoch measured 140mm L x 118mm W x 76mm H.   Video available on request. 

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels Iodpfx Ajmck Ryem Ejtf - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers Itsdpfx Amowvqzqo Esf -Machine transport roller: armored rollers 2 pieces -Load capacity: kg -Shipping/Price: complete -Dimensions: 220/120/H75 mm -Weight: 7.7 kg/piece

Condition: ready for operation (used), Milling Machine DECKEL FP 2 LB incl. 3-axis digital readout (ACU-RITE) - Travel X/Y/Z: 795x300x400mm - Automatic longitudinal / transverse / planar feeds - Rapid traverse on all three axes - Table clamping surface: 1000x440mm - 3-axis digital display (ACU-RITE) - Spindle speeds: 40 – 2000 rpm - Horizontal / vertical milling setup - Tool holder: ISO 40 - Swivel vertical head with quill - Coolant system - Machine lamp - Various tool holders - Machine documentation Itsdpfeylba Uex Am Esf Dimensions (LxWxH): 2.5x2.3x1.8 meters / Weight: 2200kg Errors and omissions excepted

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts Ijdeh N Di Djpfx Am Ejtf - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) Iedpfxjvvldue Am Ejtf RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1994, total height: 2,000 mm, total width: 4,760 mm, total length: 1,050 mm, power: 2 kW (2.72 HP), Empty weight: 750 kg Itedpfox Tcr Ajx Am Esf

Condition: used, Year of construction: 1999, total height: 2,270 mm, total width: 2,250 mm, total length: 1,900 mm, Empty weight: 1.400 kg Current frequency: 50 Hz Itsdpfx Amex Tcqxs Ejf Voltage: 400

Condition: new, Year of construction: 2026, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm connected load: 0,5 Hp 0,37 KW operating side: right Electricity: 400 V/ 50 Hz/ 3 phases Technical equipment: - Structure of the glue spreader made of welded sheet metal. - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. Isdod Iz Dfjpfx Am Estf - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest quality standard - CE standard

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer Itodpfjuyhf Hex Am Eef The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: excellent (used), Year of construction: 2010, Staalkat FP292 egg packer Year 2010 Itsdpfx Amevf Rv Uj Ejf 72,000 eggs per hour In very good working order

Condition: ready for operation (used), Year of construction: 2006, An automatic vacuum packaging machine Saccardo Arturo Figli with double chamber design is available. Sealing bars: parallel, number of bars: 2, bar length: 1300mm, max. lid internal height: 360mm, min. operating pressure: 5mbar, vacuum capacity: 2x540m³/h, pump type: PVR. Machine dimensions X/Y/Z: approx. 2700mm/1100mm/1300mm, weight: approx. 1000kg. On-site inspection is possible. Ijdpfx Amjygmbms Estf

Condition: ready for operation (used), Year of construction: 2013, Application: Removal of 12 jars from the conveyor belt in boxes of 12 with the aid of a built-in robot. On-site inspection is possible. Itodpfxerx T Dke Am Eef

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, NET WEIGHING FILLING SYSTEM TYPE TOPLINE 1200 Reaching hourly capacities of 1200 bags (ONE THOUSAND TWO HUNDRED BAGS/HOUR), the TOPLINE has been designed to meet the requirements of high-speed filling of open mouth bags. In combination with our high-capacity NET WEIGHER, the TOPLINE 1200 is the perfect machine for fully automatic filling of granulated products. The bags are singled and opened by rotating grid singling system. After filling through flap-filling spout, the bags are transferred to the bag closing system by upper belt guiding. For clean and dust-reduced transport of the bags, the bags are kept shut until they reach the bag closing system. The machine was purchased directly from Behn + Bates in 2023 used for about months. The machines construction is 2015-17 but was UNUSED/NEW idle at another customer and returned to Behn + Bates. In the Year 2023, the nearly new machine was fully upgraded to current and latest technology at Behn + Bates factory in Germany then put in production in France. New machine costs EUR 400,000+ with 9-18 months lead time. This is a great opportunity to buy at discounted price and available immediately! Video in operation available upon request. Machine Technical Data: - Electric power 17 kW - Compressed air 160 ltr./bag plus 18 m³/h at 5 bar overpressure - Dedusting air 1.750 m³/h at 10 mbar under pressure - Weighing range 10 - 52 kg adjustable in 50 gm steps - Operation 1 person for the operation of the plant and for manual supply of the bags into the magazine - Output up to 1,200 bags/h Bag - Product Specifications: - Bag type flat open mouth bags AND gusseted open mouth bags - Flat Open Mouth Bag width 400 mm – 600 mm & Bag length 550 mm – 1000 mm - Gusseted Open Mouth Bags 380 mm – 600 mm (min. 320 mm between gussets) & Bag Length 550 mm – 1000 mm - Product examples crystal sugar, rice & grain, seed, dehydrated vegetables, animal feed & pet food, etc. Characteristics
Diagnosis and functional test of the inputs and outputs
Touch panel with integrated troubleshooting
Electronic weighing system MEC
Dosing time regulator
Product contacting parts made of stainless steel
Central dedusting connections
Empty bag magazine with space for 5 bag bundles
Rotating grid singling system
Bag singling and opening by vacuum
Radial inlet flap with servo drive
Double bottom flaps
Three load cells
Flap-filling spout with internal deaeration
Liftable bag bottom vibrator
Full bag transfer by upper belt guiding Your benefits
High capacity
High weighing accuracy
Easy cleaning
Compact filling system Itodpfxeyah R Ae Am Esf
Easy palletizing due to perfectly shaped bag bottom
High filling degree and good product compaction due to bag vibrator
Intermittent bag transfer at the top of the bag = bags kept shut
Integrated electric control panel = quick assembly
Clean packaging area due to the encapsulated system
Lockable inspection doors on both the weigher and flap inlet
Easy product change

Condition: excellent (used), I sell the 2-cylinder roller coater Superfici Elmag FVR. Working width 1400mm Itedpfoiuc R Rjx Am Eof Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Itsdjywrzbepfx Am Ejf Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: new, Year of construction: 2025, functionality: fully functional, 2-head fully automatic filling machine for sale. The machine can fill containers ranging from 100 to 1000 ml. Other filling volumes are available upon request. Ijdpfx Asx Dx Tujm Ejtf Further information and additional machines available on request.

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires Itjdpfxev Hm A To Am Eef - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: ZSCT-II (Bj.2014) + ZSCT-III (Bj.2019), overall weight: 570 kg, Year of construction: 2014, power: 4.5 kW (6.12 HP), We are offering a fully refurbished Iversen graphic ZSCT-II powder coating machine, year of manufacture 2014, for a negotiable net price of €14,000. In addition, we have an Iversen graphic ZSCT-III powder coating machine, year of manufacture 2019, available for a negotiable net price of €7,900, not refurbished but in working condition. As a special bonus, you will also receive a complimentary Iversen graphic ZSCT-III powder coating machine, year of manufacture 2016, provided as a donor for spare parts. Dimensions can be seen in the attached image. Model number: ZSCT-II Voltage: 380 V Power: 2–4.5 kW Belt width: 1000 mm Belt length: 1000 mm Sheet thickness: 1–5 mm Overall dimensions: 2000 × 1800 × 1850 mm Net weight: 570 kg Model number: ZSCT-III - Year 2019 - 91/0150 Voltage: 380 V Power: 3.1 kW Pressure: 8 bar Model number: ZSCT-III - Year 2016 - 51/0116 (for spare parts) Voltage: 380 V Power: 3.1 kW Pressure: 8 bar If you have any questions or require further information, please do not hesitate to send us a message or call us. Itedpfx Aex Uqbnsm Eef

Condition: used, Rotary labelling machine for bottle labelling using two cold glue stations. Manufacturer: KRONES Model: BONAMATIC Year of manufacture: 1994 Capacity: up to 10,000 bottles/h Carousel: 12-station Configuration: 2 x cold glue label heads Iedpsywciijfx Am Ejtf Operating hours: 31,526 h Original electrical documentation. Technical condition: Used machine, condition as shown in the photos.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 8,000 m/min, rapid traverse Y-axis: 8,000 m/min, rapid traverse Z-axis: 8,000 m/min, table width: 610 mm, table length: 1,850 mm, table load: 1,000 kg, 3-axis CNC machine (VMC) STYLE - BT 1500 MACH-ID 9263 Make: STYLE Type: BT 1500 Year: 2005 Closed housing Chip conveyor Under power X - Travel: 1500mm Y - Travel: 650mm Z - Travel: 650mm Table Length: 1850mm Table Width: 610mm Table load: 1000 Feed rate X-Axis: 8000mm/min. Feed rate Y-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 14kW Speeds / ranges: 6000Rpm ATC / revolver: 24 Itedpfexlgqkjx Am Eef Number of controlled axis:3 Coolantsystem: Yes Length: 3100mm Width: 2300mm Height: 2500mm Weight: 5300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!