Used Busch Swh 90 Rla for sale (11,693)

Condition: ready for operation (used), Year of construction: 2011, Technical data: Product number: WV 0500 B Year of manufacture: 2011 Psdpsyti Ddsfx Am Tjpw Capacity: 500 m³/h Max. vacuum: 0.1 mbar The booster pump must be operated together with an oil-sealed pump with 2-3 times lower capacity. The unit has undergone complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 1,200 kg, volume flow: 1,000 m³/h, final pressure: 4 bar, Technical data: Product number RA 1000 B Year of manufacture 2004 Motor power 22 kW Capacity 1000 m3/h Max. vacuum 4 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 1200 kg Dimensions [H x L x W] 1611 x 981 x 1310 mm The pump achieves a vacuum of 4 mbar as confirmed by the sensor measurement in the video attached below. After service New oil Pedpfx Amsyc Ht Is Tepw New oil filter New exhaust separators Oil rotary vane vacuum pump, suction device – a device used in technology for the removal of gases (creation of vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Ultimate pressure (the lowest pressure that can be achieved with this pump), Pumping speed and dependence of this speed on pressure, Capacity (usually measured in m3 of pumped gas per unit time).

Condition: excellent (used), Year of construction: 2009, volume flow: 400 m³/h, Technical data: Product number COBRA NC 0400 Year of manufacture 2009 Motor power 9 kW Capacity 1000 m3/h Max. vacuum 0.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 500 kg Dimensions [H x L x W] 1111 x 781 x 660 mm Podpfx Ameyldhbo Tspw The pump achieves a vacuum of 0.1 mbar, as confirmed by a sensor reading in the video below. Pump and motor are water-cooled After service New oil New refrigerant

Condition: ready for operation (used), Technical data: Product number RA 0400 B 4ZI Motor power: 11 kW Capacity: 400 m3/h Max vacuum: 3 mbar Noise level: 74 dB Rotational speed: 1100 rpm Weight: 350 kg Dimensions [H x L x W]: 1411 x 981 x 1410 mm The pump achieves a vacuum of 3 mbar. The unit has undergone a complete overhaul. The pump is in very good condition. Oil-lubricated vacuum pump, suction unit – a device used in industrial technology to remove gases (create a vacuum) in an enclosed space. Vacuum pumps are categorized by their mode of operation into: positive displacement, jet, ion-getter, ion-magnetic, molecular, condensation, adsorption, and ionic types. Ppedpfx Amsxdvuvo Tjw The most important parameters of vacuum pumps are: - ultimate pressure (the lowest pressure achievable by the pump) - pumping speed and its dependence on pressure - capacity (usually measured in m3 of extracted gas per unit time).

Condition: ready for operation (used), Technical Data: Product Number RA 0160 D Year of Manufacture 2013 Motor Power 4 kW Capacity 160 m3/h Maximum Vacuum 0.3 mbar Noise Level 74 dB Rotational Speed 1500 rpm Weight 250 kg Dimensions [HxLxW] 1011 x 581 x 410 mm Ppodpoxdvp Hsfx Am Tsw The pump achieves a vacuum of 0.3 mbar, as confirmed by the measurement on the sensor shown in the video below. 3.1 -1 on the sensor display indicates a vacuum of 3.1 to the power of minus one, which equals 0.31 mbar. After complete overhaul The pump is in excellent condition. New oil New oil filter New exhaust separators New Electric Motor – ONE-YEAR WARRANTY Oil-lubricated vacuum pump, suction unit – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their working principle as: displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Final pressure (the lowest pressure that can be achieved with such a pump), Pumping speed and its dependence on pressure, Capacity (usually measured in m3 of pumped gas per unit of time).

Condition: refurbished (used), functionality: fully functional, Refurbished, tested Busch R5 RA 0025 F vacuum pumps available for sale, with a 6-month warranty. Ppjdeyrrl Ispfx Am Tew Worldwide shipping available – request a quote! If you are looking for vacuum pumps, accessories, or any vacuum technology related equipment, please contact us. We are happy to help you with purchasing, technical advice, or developing custom solutions.

Condition: new, Year of construction: 2026, functionality: fully functional, The CO2 laser plotter is designed for cutting and engraving a wide range of materials, such as Plexiglas, leather, rubber, wood, plywood, paper, cork, textiles and a variety of engraving laminates. It is a versatile and extremely useful device in the production processes of many industries. The CO2 1490 laser is perfect for both prototyping, small-scale production and personalization. The laser technology provides high precision cutting and engraving, as well as speed and accuracy in making complex designs and details. Ppedpfx Amjur Sv Eo Tsw - Tube power: 100 [W], - Table type: knife + honeycomb, - Cooling: water-based, - Machine power: 1000 [W], - Weight: approx. 300 [kg], - Power supply: 230 V±10%/50-60Hz, - Interface: USB, - Work surface: 1400 x 900 [mm], - Positioning accuracy: ±0.01mm, - Engraving speed: 1-800 [mm/s], - Feed system: stepper motors (servo option), - Positioning system: red dot (laser), - Cutting speed: 1-600 [mm/s]. The plotter comes with modern software to operate the machine, which allows it to work with programs such as Corel Draw, AutoCAD.

Condition: good (used), Year of construction: 1996, Vaccum pump BUSCH RA 0021, made in Switzerland, 220V, 0,75 Kw, 1,3 mbar. Pedpfx Amodtkkfs Tjpw

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand Ppsdpfjdy Hm Dex Am Tjw

Condition: used, Year of construction: 1990, Dean Smith & Grace 2413 x 90 CNC Philips 3580 Lathe. S/No. 42268 (10/1990), 24inch Swing, 13inch Over Saddle, 150inch between Centres, 2 x Fixed Steady’s, 530mm Steel 4 Jaw Chuck with t-slots – Swedish made - SCA Skand Chuckfabriks Tyringe, Data in/out configured, Post Processor available to program from CAM systems, Full Original Manuals (operating and programming), Electrical Drawings, Newly Upgraded LCD Screen, New cabinet Fan, New Keyboard, Dickson Tool Post with Holders, Coolant Tank/Pump Pedpfx Aoznkqgom Tjpw Location: These lots are located in Coventry, Birmingham & Burton-on-Trent, UK. Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Countersink, countersink, deburring countersink, pipe deburrer Psdjzp Hn Djpfx Am Tspw -Manufacturer: Rhinos, Countersink 90° MT Shank Mount MK2 -Blade diameter: Ø 50 mm -Outer chamfers: 25-44 mm -Internal machining range: 20-39 mm -Dimensions: Ø 50 x 160 mm -Weight: 0.9 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 1 x G. Mondini S.p.a. inline heat sealing machine fitted with ICE Zodiac thermal transfer overprinter. Supplied with User Manual, Electrical Diagrams, 4 x sets of tooling with arms for different sized punnets and 1 x tool trolley. Manufacturer – G. Mondini S.p.a. Model – SF 90. Serial number – 3713/09-1. Date of manufacture – 2009. Tooling set 1 - Infia K62, 4 x 1 format, square punnets 163mm long x 163mm wide (approx). Tooling set 2 - Proseal SPL, 2 x 1 format, 270mm long x 174mm wide (approx). Tooling set 3 - T1478X PS48213, 5 x 1 format, 174mm long x 132mm wide (approx). Tooling set 4 - details TBC. Ppsdpsy Hl E Sofx Am Tjw Overall dimensions - 4220mm long x 900mm wide x 2150mm high. Tooling trolley dimensions - 1300mm long x 750mm wide x 1750mm high.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: Pjdpfozqc Ngjx Am Topw All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... 2 pieces -Dimensions: see photos Pjdpfszn I Rdsx Am Tepw -Submission/Price: complete -Transport dimensions: 380/205/H240 mm -Weight: 77 kg

Condition: used, Year of construction: 1983, color: other, total height: 2,900 mm, total length: 4,600 mm, total width: 2,300 mm, Serial number: 1 Hose diameter: 90 mm Hose length: 280 meters Drive: via turbine Dimensions: 4600x2300x2900 mm Online auction of construction, agricultural, and industrial machinery (including: JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders, and MANITOU skid-steer loaders, aerial work platforms, FORD and MERCEDES-BENZ trucks, portable compressors, power generators, rollers, scissor lifts, various ROLLAND and KUHN agricultural machines, and off-road and workshop equipment, etc.), with most lots located at our own warehouse in Deinze, Belgium. The online auction opens Wednesday 22 July and closes Tuesday 4 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Ppjdpfx Amszqdv Ue Tsw Viewing day is on: - Monday 3 August Pickup days are on: - Tuesday 11 August - Tuesday 11 August - Thursday 13 August - Thursday 13 August Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... 2 pieces Pedpfoznuhpox Am Tspw -Hole spacing: 220 x 90 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 280/275/H200 mm -Weight: 30.1 kg

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. Ppedpfx Aov S Synom Tjw CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Podpfoznk R Tsx Am Tjpw -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of manufacture: 2012 ----- Double hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement: VG max. = 180 cm³ / revolution Volumetric flow: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER, Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement: VG max. = 46 cm³ / revolution Volumetric flow: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER, Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement: VG max. = 16 cm³ / revolution Volumetric flow: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER, Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement: VG max. = 16 cm³ / revolution - Pressure regulator PARKER, Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Mains connection: 400 Volt, 50 Hz - Double hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 Psdpfszqgllex Am Tjpw - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers, Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H: 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil) Footprint with attachments L x W x H: 2700 x 2250 x 2820 mm Weight: 3500 kg very good condition

Condition: new, functionality: fully functional, power: 196 kW (266.49 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System Pedozi Uyzepfx Am Tepw • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), mileage: 142,344 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 06/2022, loading space length: 770 mm, loading space width: 1,420 mm, loading space height: 1,280 mm, color: black, driver cabin: day cab, tire size: 245/55R17, number of seats: 7, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, parking heater, seat heater, traction control, = Additional Options and Accessories = - Bluetooth - Electric windows - Electric mirrors - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/Cassette - Reversing camera - Lane keeping assist - Blind spot sensor = Notes = Configuration: 4x2, Tare weight: 2660 kg, Gross vehicle weight: 3500 kg, Alloy wheels, Cruise control, Air conditioning, Number of airbags: 4, Auxiliary heater, Rear window wiper, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: Black, Metallic, Reversing camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 150 kW (201 hp), Fuel: Electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side paneling, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tailgate, Central locking, Number of seats: 7, Seat cover: Leather, Seat adjustment: Manual, L3 7-seater 90 kWh 344 km WLTP, Empty, 2x electric sliding doors, Air conditioning, Camera, Cruise control, AC/DC, Tire type: All-season tires = Further Information = General Information Number of doors: 2 License plate: KLEYN1 Axle Configuration Tire size: 245/55R17 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 3 mm Podpfx Aoy Iwdiom Tspw Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Dimensions Dimensions (L x W x H): 537 x 193 x 188 cm Weights Tare weight: 2,660 kg Payload: 840 kg GVW: 3,500 kg Functional Loading area height: 50 cm Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €528 per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: used, mileage: 90,000 km, power: 88 kW (119.65 HP), first registration: 05/2016, fuel type: diesel, overall weight: 2,700 kg, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system: Radio CD 18 BT (Radio/CD, USB port, Bluetooth), spare wheel with road tyres, seat configuration: bench seat omitted Additional equipment: Driver's airbag, exterior mirrors electrically adjustable and heated, on-board computer, brake assist, tachometer, electronic differential lock, rear wing doors without windows (opening angle 180 degrees), body/construction: standard panel van, cab: standard cab, body length: L1, roof height: standard roof (H1), fuel tank: 80 litres, adjustable steering column (steering wheel), engine: 1.6 litre - 88 kW biturbo CDTI, radio remote control on steering wheel, wheelbase: 3,098 mm, low-emission according to Euro 5 emissions standard, steel wheels 6.5x16, start/stop system, variable load securing rails (FlexFix system), heat-insulating glazing, permissible total weight 2.7 t Pedpszlp Avsfx Am Tjpw Vehicle shows signs of wear visually, technically in very good condition! Financing available

Condition: used, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 09/2004, total length: 16,800 mm, total width: 2,530 mm, total height: 1,750 mm, suspension: hydraulics, tire size: 295 / 80 / R22.5, color: red, Year of construction: 2004, General information Pedpjznu U Nofx Am Tjpw Model code: ### Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: BPW ECoPlus Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Double wheels; Lift axle; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Max. axle load: 12000 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 4: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 5: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 21.680 kg Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 1978, x-travel 1000 mm y-travel 900 mm z-axis 800 mm W-axis (spindle longitudinal) 500 mm spindle diameter 90 mm table surface area 1.000 x 1.000 mm table load 2,5 t spindle turning speed range 8- 1600 U/min power capacity - milling spindle 11 kW tool taper SK 40 | Ppedpfx Ajzmir Tem Tjw control Heidenhain TNC 407 dimensions 4,5 x 3,25 x 3,0 m weight of the machine ca. 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system

Condition: used, Year of construction: 2025, tube diameter 16.0 - 90.0 mm width of the strips 100 mm band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use (!!) New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine Ppsdpfexab N Djx Am Tjw - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport