Used Calibration Weight for sale (62,494)

Condition: excellent (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts Nedpevu Hgbofx Aazelg over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Nedpfot Tqy Eox Aazslg Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Thermotron AST-18 HALT/HASS Test Chamber Manufacturer: Thermotron Industries Model: AST-18 Controller: AST-8800 Machine Type: HALT/HASS Test Chamber / Accelerated Stress Test System For sale is a Thermotron AST-18 HALT/HASS test system for combined temperature and repetitive shock/vibration testing. The system enables accelerated stress testing of components and assemblies through extreme temperature changes in combination with multi-axis vibration excitation. Operation and monitoring are performed via the Thermotron AST-8800 controller. Technical Data: Temperature Range: -100 to +200 °C Temperature Change Rate: >50 °C/min at the test specimen Vibration Frequency: 0 to >10,000 Hz Vibration Axes: 3 linear + 3 rotational / 6 degrees of freedom Max. Payload Test Table: 135 kg Airflow Rate: 1,400 CFM / approx. 2,379 m³/h Grid Dimension: approx. 102 × 102 mm Voltage Supply: 400 V / 3 Ph / 50 Hz Max. Current according to Nameplate: 65.3 A Heating Power according to Nameplate: 20 kW AST-8800 Controller: Windows-based user interface Combined temperature and vibration display PSD / Power Spectral Density Data recording and data storage Vibration alarm and shutdown limits Ethernet / Web access User management Monitoring of operating and maintenance times Nlsdozyndbspfx Aazog Test Chamber: W × D × H: approx. 838 × 864 × 762 mm Test Chamber Volume: approx. 0.55 m³ / 550 liters Vibration Table: Manufacturer's table size depending on the configuration: approx. 610 × 610 to 711 × 711 mm Impactors: 4 or 5, depending on the design Dimensions: Move-In Dimensions W × D × H: approx. 2,286 × 1,448 × 2,210 mm Footprint: approx. 2.29 × 1.45 m Equipment: Thermotron AST-8800 controller Repetitive shock/vibration table Temperature test chamber Acceleration sensors Temperature measurement technology Safety and monitoring functions Condition: Used Optical condition as shown in the pictures. Calibration valid until 30.11.2024, currently expired. Scope of Delivery: Thermotron AST-18 HALT/HASS test system AST-8800 controller RS-28 unit Scope of delivery and accessories as shown in the pictures. Shipping Data: Dimensions: approx. 2,286 × 1,448 × 2,210 mm Weight: approx. 1,000 kg (estimated) Shipping via freight forwarder possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: used, Werth Type: Werth SCOPE-CHECK 400 3D coordinate measuring machine Nlsdpozh Dq Hjfx Aazog Technical data: Measuring capacity (X x Y x Z): 400 x 200 x 200 [mm] Work table with integrated electrical cabinet: 1600 x 950 x 780 [mm] Max. weight on table: 20 [kg] Operating conditions: * Relative humidity: 40 - 70 [%] * Temperature: 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 microns) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental scales Ball screw drive with servo motor Optical magnification (video): 0.5X to 5X Optical field (video): 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball bearing Combinable lighting: diascopic, episcopic, ring-shaped LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table via joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Software: WinWerth v8.40 Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data are subject to change!) Please inquire about transport options before purchase. We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1997, Used Machine Year of manufacture: 1997 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding of solid wood - Calibration of workpiece carrier panels - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibrating roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,100 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec Nlsdpoz A H Eyofx Aazjg - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 160 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 1840 x 1670 x 2200 mm - Weight: approx. 2000 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibrating and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior design companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller can be pneumatically adjusted, low wear due to ribbed steel roller Grain size compensation Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed speed can be steplessly adjusted via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the discharge end Constant working height of 900 mm by adjusting the upper part of the machine, thus can also be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm Workpiece height approx. 3 to 150 mm Common sanding belt dimension: 1360 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable discharge table Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar setting points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibrating roller. CE marking Operating manual Nodpozqvmrofx Aazslg Without the illustrated connection cable Original paint, only retouched in some areas Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Nsdox Twcpjpfx Aazslg

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Nodpfx Aozx S Egsazolg Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Year of construction: 2020, condition: used, Six identical Rodenstock DNEye Scanner 2+ units are available, five of them available from January 2027, printer: black-and-white printer, screen type: TFT LCD touchscreen, screen size: 10in, WSVGA, 1024x600pixels, spherical measurement range: -20dpt to +20dpt at 12mm vertex distance, cylinder range: 0-8dpt, axis: 0-180°, pupil measurement range: 2-7mm, 3 zones, number of measurement points: 1,400points at 7mm pupil, measurement method: Shack-Hartmann, number of rings: 24, number of measurement points: 6,144, number of analyzed points: 100,000, diopter range: 37.5-56dpt, reproducibility: 0.03mm, method: Placido disc/keratoscope, measurement wavelength: 455nm, no UV light, measurement range: 150-1300µm, precision: under 5µm, method: static Scheimpflug camera, measurement wavelength: 850nm, method: retroillumination, calibrated range: 7-50mmHg, precision: ±2mmHg, length: 530mm, width: 312mm, height: 570mm, weight: 25kg, with documentation. An on-site inspection is possible. Nedpfx Aajz Eudcszolg

Year of construction: 2016, operating hours: 9,580 h, condition: excellent (used), functionality: fully functional, Edge Polisher Comandulli Musa 7+4 DX Partially processed meters – 5578m Total operating hours – 9580h Working direction: from right to left - Advance/feed speed (conveyor belt) 0–3 m/min - Belt width 600 mm - Working thickness 10–80 mm - Min. working width 80 mm - Max. working width (without bar) 1200 mm - Max. working width (with bar) 3000 mm - Loading plane height 750 mm Aggregates: - Calibrating spindle for vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles no. 7 with floating mechanism – oscillation - Beveling spindles no. 4, the first two beveling spindles (no. 1 upper and no. 1 lower), inclined at 45°, are equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously generated bevels. Nljdpfozipzgjx Aazeg Automatic valves for the water 2 roller tables, 1.5 m each Color touch screen Rated output 22 kW Dimensions (excluding rollers) 5.15 x 1.8 x 1.74 m Weight 4000 kg

Condition: used, mileage: 510,274 km, power: 353 kW (479.95 HP), first registration: 03/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro5, total length: 10,550 mm, total width: 2,550 mm, total height: 3,980 mm, loading space volume: 34 m³, Year of construction: 2012, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, MAN TGS 35.480 8x2-4BL Silo Truck for Pellets (Heitling Silo, Year 2012) Nodpfx Aaez Ewytezolg Description: For sale is a reliable and well-equipped MAN TGS 35.480 8x2-4BL with a Heitling silo body (built in 2012), specifically designed for the transport of wood pellets, including hoses and a vacuum cleaner (see pictures of the storage box for accessories). The vehicle is in operational condition and has a valid main inspection (TÜV until 04/2027), and the calibration is valid until 31.12.2027. Vehicle Data & Highlights: Manufacturer & Type: MAN TGS 35.480 8x2-4BL * First Registration: 07.03.2012 * Mileage: approx. 510,274 km * Engine: D 2676 LF18 (12,419 ccm, 353 kW / 480 hp) * Emission Class: Euro 5 EEV * Transmission: Manual transmission * Axles: 4-axle chassis (leaf/air suspension), 4th axle designed as a lift and steer axle * Wheelbase: 5.20 m * Tires: 315/80 R22.5 (tread depths: Axle 1: 30/40, Axle 2: 20/30, Axle 3: 40/30, Axle 4: 30/20) Weights & Payload: Permissible Total Weight: 32,000 kg * Unladen Weight: 12,860 kg * Payload: 19,140 kg Body & Technology: Silo body for pellets, 34,000 liters (Heitling Silo, Year 2012) * including hoses * 4 equally sized chambers = a total of 34 m³ * Weighing system * Calibration valid until 31.12.2027 * Hydraulic system for compressor * Kaeser Compressor Rotary Blower Omega 52 Plus * Continuous brake: Intarder Cab & Equipment (LX Cab): * Air Conditioning: Automatic climate control * Comfort: Auxiliary heater, refrigerator, 1 bed * Assistance Systems: Cruise control, reversing camera, ABS * Entertainment & Radio: CD radio, CB radio * Exterior Features: Alloy wheels, 2 storage boxes * Color: Blue Inspections & Certificates: TÜV valid until: 04/2027 * SP valid until: 10/2026 ---- The vehicle is available immediately. If you are interested or have questions regarding a viewing, we look forward to hearing from you! New main inspections / safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Through our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Day license plates / export license plates We will gladly help you obtain export license plates/short-term license plates.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Njdpfxjzwvu Nj Aazelg Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Nlsdpfxozwvtxs Aazsg Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: used, mileage: 510,274 km, power: 353 kW (479.95 HP), first registration: 03/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro5, total length: 10,550 mm, total width: 2,550 mm, total height: 3,980 mm, loading space volume: 34 m³, Year of construction: 2012, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, MAN TGS 35.480 8x2-4BL Silo Truck for Pellets (Heitling Silo, Year 2012) Description: For sale is a reliable and well-equipped MAN TGS 35.480 8x2-4BL with a Heitling silo body (built in 2012), specifically designed for the transport of wood pellets, including hoses and a vacuum cleaner (see pictures of the storage box for accessories). The vehicle is in operational condition and has a valid main inspection (TÜV until 04/2027), and the calibration is valid until 31.12.2027. Vehicle Data & Highlights: Manufacturer & Type: MAN TGS 35.480 8x2-4BL * First Registration: 07.03.2012 * Mileage: approx. 510,274 km * Engine: D 2676 LF18 (12,419 ccm, 353 kW / 480 hp) * Emission Class: Euro 5 EEV * Transmission: Manual transmission * Axles: 4-axle chassis (leaf/air suspension), 4th axle designed as a lift and steer axle * Wheelbase: 5.20 m * Tires: 315/80 R22.5 (tread depths: Axle 1: 30/40, Axle 2: 20/30, Axle 3: 40/30, Axle 4: 30/20) Weights & Payload: Permissible Total Weight: 32,000 kg * Unladen Weight: 12,860 kg * Payload: 19,140 kg Body & Technology: Silo body for pellets, 34,000 liters (Heitling Silo, Year 2012) * including hoses * 4 equally sized chambers = a total of 34 m³ * Weighing system * Calibration valid until 31.12.2027 * Hydraulic system for compressor * Kaeser Compressor Rotary Blower Omega 52 Plus * Continuous brake: Intarder Cab & Equipment (LX Cab): * Air Conditioning: Automatic climate control * Comfort: Auxiliary heater, refrigerator, 1 bed * Assistance Systems: Cruise control, reversing camera, ABS * Entertainment & Radio: CD radio, CB radio * Exterior Features: Alloy wheels, 2 storage boxes * Color: Blue Inspections & Certificates: TÜV valid until: 04/2027 * SP valid until: 10/2026 ---- The vehicle is available immediately. If you are interested or have questions regarding a viewing, we look forward to hearing from you! New main inspections / safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Through our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you load your purchased vehicles. Nljdpfx Asz Emh Hsazjg Organization of special transports We will gladly help you organize special transports. Day license plates / export license plates We will gladly help you obtain export license plates/short-term license plates.

Condition: new, Year of construction: 2021, machine/vehicle number: GWH432125, Working width 1,100 mm, Sanding belt dimensions 1,120 x 2,150 mm, Max. work piece thickness 160 mm, Combination sanding unit with calibrating roller D = 150 mm, Pneumatic segmented sanding shoe with insert control, Motor 15 kW (20 hp), Sanding belt speed 18 m per second, Infinitely variable feed speed 4 - 20 m/min, Feed motor 0.55 kW (0.75 hp), Electric table positioning with motor 0.24 kW and digital LCD height display, Mechanical "ECO GEAR SYSTEM" (oscillation of the sanding belt), Automatic belt centering, Automatic emergency table lowering, Check control panel, Automatic sanding roller shut-off on the control panel, Sanding grit adjustment with 6 positions for 2 rollers each in the infeed and outfeed, Dust extraction connection D = 160 mm, Machine complies with CE regulations Dimensions approx. L x W x H, 1,650 x 1,800 x 2,025 mm Weight approx. 1,300 kg, Nodpfx Ashgmmaeazslg (Identical construction to Unitek LC 1120 1N KRT) Ex works, from warehouse Seevetal, subject to prior sale, without transport, assembly and instruction.

Condition: good (used), Code: 0483 Brand: SCM Model: SANDYA UNO CCS Automatic compact 2-belt wide belt sander for furniture, custom-made furnishings, fixtures, doors, panels, composite materials and various Composition: 1° Group: Calibrating roller 2° Group: Combined Rubber Roller / Finishing Pad Automatic table lifting Working width mm 920 Working height mm 3 - 160 Abrasive belt dimensions mm 930 x 1525 Feed belt speed mt/min 4,5/9 Motor power Hp 10 Infeed and outfeed roller conveyors Automatic table positioning Oscillating belts Working pressure Atm 6 Exhaust hood diameter mm 160 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050 Nedpfsz Er Swex Aazelg

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges Nsdpfx Aaeyrndmezolg X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper Nljdpfxsz Diq Us Aazeg - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: used, Year of construction: 1999, Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 Nsdpfx Asz Ecyrsazslg The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1400 mm effective width (NUB): 700 mm belt width (GB): 585 mm hight (BH): 740-840 mm Motor Type: SEW Gearmotor Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes Nlsdpfx Aasyc H N Njzsg • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap Nlodpfszza Hksx Aazeg - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door • Installed machine options/features: • Upper table • Glass scales • Reinforced A-axis, up to 750 rpm • Preparation for automatic calibration/probe • Grinding wheel measuring probe • Automatic fire suppression system with leak detection • TS-Remote Ready • Keyboard support • Oil leak sensor • Connection for external filtration system Additional equipment • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders • Flanges/adapters • Grinding wheel/electrode accessories • Automation/handling: • TOP loader • 12 pallets • Filtration/cooling/extraction: • Oil mist extraction system • Extraction silencer • Oil cooling unit • Filtration system with tank and pump • Workholding/tooling: • Collets 6–16 mm • Collets 16–32 mm • 351 ES collets: 6, 8, 10, 12, 16 mm • 4 x 351 ES collet sets • Collets: 6, 8, 10, 12, 14, 16, 18, 20, 25 mm • Automatic holder 6–16 mm • Automatic E386 holder, 16–27 mm • Manual hydraulic holder, diameter 32 mm • ISO 50 socket • ISO 50 arbor • 2 x 50 mm HSK electrode holders • 4 x 45 mm HSK grinding wheel holders • Grinding wheel holder for dressing • Grinding wheel set measuring adapter • HSK calibration disc • Calibration roller • Measuring: • Heliset Plus measuring device • Software/options/packages: • Tool Studio for PC • Tool Studio Step Tools • 45-degree P-System sharpening option • P36 wood drill tooling package • Drill package • Hoger P58 package • Consumables: Nlodozxg Tfopfx Aazjg • 4 x 208 l dielectric fluid

Condition: used, Year of construction: 2015, Faro Prime Measuring Arm Njdey Nl H Ujpfx Aazelg Condition: Used Year of Manufacture: 2015 Features: - Temperature and overload sensors - Compatible with multiple measuring probes - Internal weight compensation - Wireless operation Advantages: - Repeatability accuracy starts at 0.016mm - Exclusive 6-axis version - Unrestricted rotational flexibility - Versatile, suitable for both production and metrology applications - Lightweight design thanks to new materials - Arm reach of 0.9 m, working volume of 1.8 m (6 ft), 6 axes, tactile arm - Includes calibration certificate, accessories, and

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 160 mm, workpiece width (max.): 1,100 mm, Wide belt sanding machine Manufacturer: Bütfering Type: Optimat SWT 124 RK Year of manufacture: 2010 Compact wide belt sanding machine, originating from a parquet manufacturing facility. Suitable for sanding solid wood, frames, and glued wood panels, as well as MDF, chipboard, or plywood. Allows for 2 grit levels in a single pass. Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x Calibrating unit / steel contact roller, profiled, diameter 160 mm, approx. 15 kW 1x Combination unit (roller / sanding shoe), profiled and rubberized contact roller approx. 65 Shore, diameter 160 mm, pneumatic pressure bar, approx. 11 kW Feed speed, continuously adjustable, approx. 3 - 13 m/min., approx. 1.1 kW Nodpfx Aajzznkkjzjlg Sanding belt dimensions: 1120 x 1900 mm with belt blowing device Compressed air: 8 bar Extraction capacity: approx. 2900 m3/h Voltage: 400 V, 3 phases, 50 Hz, 63 A Total connected load: 28 kW Dimensions approx. 1700 x 1850 x 1900 mm (L x W x H) Weight approx. 1800 kg

Condition: good (used), Year of construction: 2014, input voltage: 15 V, operating temperature: 50 °C, input current: 3 A, repeat accuracy: 0.02 mm, Brand: Hexagon Metrology (ROMER line), manufactured in Montoire, France. Model: ROMER Absolute Arm, Type RA-7525-4. Serial number: 7525-2336-FA. Date of manufacture: 09/04/2014 Configuration: 6 axes, contact probe (does not include an integrated laser scanning head, only a ball probe). Measurement range (working volume): 2.5 m in diameter. Point repeatability: ±0.020 mm. Nsdpfx Aajz D An Hozslg Volumetric accuracy: ±0.029 mm. Approximate arm weight: ~8 kg. Operating temperature: 0 °C – 50 °C. Power supply: 15 V DC, 3.0 A. Mobility accessory: battery/pack "FP2 Mobility Pack" (Hexagon Metrology SAS, ID FP2-2423-FA, manufactured 10/29/2014), which allows the arm to operate wirelessly. Mounting: base with clamp/vise for table mounting, with the possibility of rotation. Probes (styli): 2 interchangeable units, serialized to this arm (7525-2336-FA) — one with a pink ruby ball and the other with a larger diameter steel ball — stored in a rigid Hexagon case with space for a third probe and replacement keys. Included computer equipment: HP ZBook laptop with metrology software loaded (in Spanish). Calibration: ENAC certificate no. 0328/2018, ENAC accreditation 116/LC10.083, calibration date 07/27/2018.