Used Cast Resin Distribution Transformer for sale (4,825)

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges Bodpfoyfvwbsx Al Aodh On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg Bdjdpfx Aeyx Dfnol Ash

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Heavy-duty roller conveyor with individually adjustable rollers. 8 units on a steel frame. Roller length: 550 mm. 2 x 8 m, or 1 x 8 m. Roller diameter: 165 mm. Robust bearing design. Suitable as an infeed roller conveyor for planers, double edgers, resaws, etc. Bdsdpfx Aoyq Nmtsl Ash

Condition: like new (used), functionality: fully functional, load capacity: 30,000 kg, fuel type: electric, construction height: 180 mm, overall weight: 800 kg, JUNG JLA 15/30 G Heavy-Duty Transport System Up to 30 tons Professional heavy-duty transport system for moving machinery up to 30 tons. A professional JUNG heavy-duty transport system is available for rent for the movement, installation, and relocation of heavy machinery and equipment. The system consists of an electrically powered heavy-duty transport system JUNG JLA 15/30 G and two rigid heavy-duty transport systems JUNG FB 15 G. The electric transport system has a load capacity of 15 tons. In combination with the two rigid heavy-duty transport systems, the complete system is designed for a total load capacity of up to 30 tons. Application areas • Machinery relocation • Production line relocation • Installation and removal of machine tools • Presses and injection molding machines • CNC machining centers • Transformers and switchgear cabinets • Industrial plants and special machines Scope of delivery • 1 electric heavy-duty transport system JUNG JLA 15/30 G • 2 rigid heavy-duty transport systems JUNG FB 15 G • 2 foldable transport beams (working length approx. 2,400 mm) • 4 hydraulic machine jacks JUNG JH 10 G plus (10 t) • 4 pump levers • Tele Radio remote control with carrying strap • 2 spare batteries for remote control • Charger for remote control • Drive battery 48 V / 60 Ah • Battery charger 48 V / 50 A • 12 load distribution plates • 2 wire rope lifting slings • Crowbar Transport data Package 1: Wooden crate with accessories (1,200 × 800 × 1,150 mm), approx. 380 kg. Package 2: Pallet with electric transport system incl. drive battery (1,200 × 1,200 × 400 mm), approx. 350 kg. Total weight: approx. 730 kg. Rental conditions • Rental exclusively to commercial customers. • Return in complete and cleaned condition. • Missing or damaged parts will be charged at the replacement cost. • The lessee is liable for loss and damage during the rental period. • Operation exclusively by qualified personnel. • Manufacturer: JUNG Hebe- und Transporttechnik GmbH • Type: JLA-e 15/30 G (without lifting function) • Year of construction: 2017 • Electric transport system: 15 t load capacity Bsdpfezi Dhuex Al Aedh • Total system: up to 30 t total load capacity • Control: Tele Radio remote control • Drive battery: LiFeMnPO₄, 48 V, 60 Ah, 2.88 kWh • Charger: AXIMA FLEXIS 48 V / 50 A Electric drive system • Dimensions: approx. 1,215 × 835 mm • Height: 180 mm • Weight: approx. 198 kg (without battery) • Travel speed: 6.5 m/min • 16 polyurethane rollers Ø 140 × 59 mm • Turntable support Ø 215 mm Rigid transport system JFB 15 G • Load capacity: 15,000 kg • Height: 180 mm • Transport system cassette: 460 × 205 mm • Support area: 220 × 120 mm • Adjustment range: 415–1,300 mm • Weight: approx. 68 kg

Condition: good (used), Year of construction: 2001, Startloch-Bohrmaschine Machine type: CASTEK HK-24 Year: 2001 SPECIFICATIONS Table size: 450 x 260 mm X-Axis: 400 mm Y-Axis: 250 mm Drill diameter: 0.3–3.0 mm Max. Werkstückabmessungen: 810 x 510 x 240 mm Erodierhub: 370 mm Dielektrikum: 20 ltr. Power consumption: 4,5 KW Req. space (LxBxH): 1.400 x 1.400 x 2.400 m Machine weight: 1.000 kg Bedpfx Alezkbtdo Aedh

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Bdedpfx Aeyy Nl Nol Ajh Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg

Condition: used, functionality: fully functional, fuel type: diesel, color: yellow, Supra Technologies - Vacuum Machine for Applying Paving Stones / Tiles / Slabs Excellent condition | Lightly used 🔹 Price: €60,000 Bedpfxjzcwm Ee Al Ajdh Professional Supra Technologies vacuum machine for applying paving stones, tiles, and slabs. Equipment in excellent condition, used but very well maintained and with excellent performance. Ideal for paving companies, civil construction, marble workshops, and large-scale projects. Advantages: Significantly simplifies and speeds up the handling and application of heavy pieces. Reduces physical effort and the risk of accidents. High precision in positioning. Robust and reliable (a leading brand in the industry). It is functioning perfectly and ready to continue producing results.

Condition: used, functionality: fully functional, fuel type: diesel, color: blue, Year of construction: 2005, Advertisement for a rebar bending machine for culverts and pipes. Bdodpfx Aley Uffno Ajh In good condition (fully functional). €50,000

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm Bjdpfx Aefrvzvol Aodh casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: good (used), Current stock level: approx. 53 units. Included in the scope of supply: 1x swivel castor, used Manufacturer: Wicke Type: 01 Material color of the wheel: cream white Material color of the frame: sendzimir galvanized Technical data: Overall height: approx. 100 mm Wheel diameter: approx. 80 mm Bdjdpfx Alehmuxvj Ajh Wheel width: approx. 35 mm Tire material: PA6 Plate dimensions: approx. 100 x 85 mm (W x D) Hole diameter: approx. 9 x 11 mm (oval) Number of holes: 4 pcs Screw hole spacing: approx. 80 x 60 mm (center to center of hole) Weight per unit: approx. 0.370 kg Advantages compared to PA wheels: - PA wheels have very low wear. - They do not leave any marks on the floor. - PA wheels have very low rolling resistance. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Current stock level: approx. 965 units. The scope of delivery includes: 1 x swivel castor, used Manufacturer: Kama Castor material color: Red Frame material color: sendzimir galvanized Technical data: Overall height: approx. 155 mm Castor diameter: approx. 125 mm Castor width: approx. 34 mm Bearing: Needle bearing Castor material: Rubber Plate dimensions: approx. 105 x 80 mm (W x D) Bjdpjhmuyzsfx Al Aedh Hole diameter: approx. 9 x 17 mm (oval) Number of holes: 4 pcs Screw hole distance: approx. 80 x 55 mm (center to center) Weight per unit: approx. 0.970 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2009, power oil transformer 12,5MVA 110 / 23kV, manufacturer ETD Plzeň Czech, on load tap changer, conservator, functional, in operation since 2009, very good off-load and on load losses, price negotiable. Bdjdpfx Aehufn Nol Aoh

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm Bdodpeiu Smbsfx Al Aoh casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: used, Sensor-actuator distributor, distributor strip -Type: SAI-8-MMS 4P M12 -8-way: distributor Bodpfx Alod Tqkqj Asdh -Weight: 800 g

Condition: used, 1st pc. Bouncy castle jungle garden, second-hand Viv Production Bsdoua S D Rspfx Al Aodh Year 2011 Dimensions approx. 15.5 m x 4.5 m, height ok 5 m 1st pc. Bouncy castle dragon, dragon tunnel Dragon castle width 3 m Height 3.5 m Length 18.5 m Weight approx. 150 kg Connection to 3 blowers Used Cjolmraduy Functional

Condition: used, Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -3 pole -Distributor: 4-way -Weight: 0.1 kg Bdsdpfxsdntfds Al Ash

Condition: used, Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 6-way Bdededntffspfx Al Ash -Weight: 90 g

Condition: used, Year of construction: 2013, machine/vehicle number: 18575 / 2013, Temperature control unit from manufacturer Robamat, used and untested. The unit is designed for application in tool temperature regulation, injection molding, and industrial process engineering. It operates as a dual-circuit system with the Thermocast 4212 control system. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min at 5.0 bar*. Year of manufacture: 2013. Total weight: 350 kg. Bodpfjy Suz Tsx Al Aodh

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 780 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: 0iMF, table load: 700 kg, overall weight: 6,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, tool weight: 6,000 g, number of axes: 4, This 4-axis Finetech SMV 1060 H3L was manufactured in 2024. It features an impressive X-axis travel of 780 mm, Y-axis travel of 600 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1100 x 600 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Finetech SMV 1060 H3L vertical machining centre. Contact us for further details. • Structure: Cast iron structure; roller linear guideways • Control: FANUC 0iMF; 10.5" monitor; remote electronic handwheel • Table: 1100 x 600 mm; 5 T-slots; T-slot size 18 mm; T-slot pitch 100 mm • Distances: Spindle nose to table 130–780 mm • Spindle: taper No. 40 • Tool changer (ATC): Tool holder taper ISO40 DIN69871; 24-position magazine; max tool Ø 80 mm; max tool length 300 mm; bidirectional selection; tool-to-tool 3 s; chip-to-chip 6 s • Feedrates: Rapids X/Y/Z 36/36/32 m/min; working feedrate X/Y/Z 1–12,000 mm/min Bjdpfsy Tlpwsx Al Aedh • Coolant/utilities: Coolant tank 380 L; working pressure 4 bar; total installed power 25 kVA • Dimensions & weight: 2900 x 2500 x 2800 mm • Standard features: Rigid tapping; full safety enclosure; random bidirectional ATC arm; 24-position tool magazine; oil spindle cooling unit; Z-axis gas balancing system; automatic guide lubrication; electrical cabinet heat exchanger; working area lamp; service keys; transformer; manuals and CE declaration Additional equipment • Chip conveyor (screw type) • Optional 40-tool chain-type magazine: BT40/CAT40; max tool Ø 75 mm with adjacent pockets occupied, Ø 152 mm with adjacent pockets empty; max tool weight 8 kg; max total tool weight 160 kg; air pressure required 5–6 kg/cm² Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 920 kW (1,250.85 HP), overall weight: 3,465 kg, total width: 1,281 mm, total length: 2,606 mm, total height: 1,595 mm, pressure: 6 bar, nominal heat output: 920 kW (1,250.85 HP), temperature: 183 °C, tank capacity: 801 l, fuel: liquefied natural gas (LNG), operating pressure: 6 bar, Equipment: documentation/manual, For Sale: Full working and complete Industrial Gas Boiler System Buderus Logano GE615 – 920 kW | 2023 | Excellent Condition High-performance industrial heating system for sale, commissioned at the end of 2023 and operated for only two heating seasons (2023/2024 and 2024/2025). The system is currently fully operational and can be inspected and tested under working conditions. Sold as it is with all the hardware including stainless steel chimney, electrical distribution panel and complete interior fittings included in the price. The installation was professionally executed and regularly maintained. The system is in excellent technical condition with no leaks, corrosion, or structural defects. The boiler can be adapted for alternative fuel operation (e.g. LPG or oil) subject to burner configuration and technical adjustment. Main Configuration: Boiler Buderus Logano GE615 – 920 kW Nominal output: 821 – 920 kW Number of sections: 13 Flue gas temperature: 139 – 183 °C Length: 2606 mm Width: 1281 mm Height (without control unit): 1595 mm Flue connection: 360 mm Weight: 3465 kg Burner: *Weishaupt VW-G 10/4-AZM Gas Burner Control System: *Bosch CC8311 Control Unit Circulation Pumps: *2 × Wilo Yonos MAXO 80/0.5-12 Technical Specifications: Type: Industrial cast iron gas boiler Fuel: Natural gas/Diesel Condition: Fully operational Year of installation: 2023 Operating period: 2 heating seasons only Inspection and live test possible on site Suitable Applications: Hotels Hospitals Manufacturing facilities Bodpfx Aey Tp Evjl Asdh Administrative buildings Schools Greenhouses Logistics and industrial centers Additional Information: Automation and circulation pumps included Dismantling and transport can help with logistics Sale as a complete boiler room system Price EUR 58,000 EXW plus VAT Contact G. Jordanov Location: Ruse,Bulgaria

Condition: used, Year of construction: 2018, X TRAVEL 3000 MM Y TRAVEL 1800 MM Z TRAVEL 1800 MM SPINDLE TAPER ISO 50 SPINDLE SPEED RPM.5000 SPINDLE MOTOR POWER 25KW TABLE MM.1500x1750 CAPACITY 10TON CNC HEIDENHAIN 530 HR520 remote control panel with display for Heidenhain CNC Manual head attachment to the RAM/VERTICAL SLIDE. Direct-drive universal head indexed, 360,000 positions. ATC 46POS. Laser probe and software for tool integrity verification and tool length and radius measurement Workpiece measurement and alignment probe Bodpfxjzwl Eds Al Aodh External/internal tool coolant, 800 L tank, pressure = 40 bar Compressed air internal tool coolant Control station Roofless perimeter enclosure Work area lighting Chip conveyor positioned to the right of the machine YEAR 2018

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net price: €7,865.55 / Gross price: €9,360.00 Article number: A3T235502100.01 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 500 x 210 x 0 cm • External dimensions (LxWxH): 672 x 249 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 855 kg • Payload: 2,645 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low frame design enables an extra low loading height of 520 mm • Very stable, welded steel frame • Vehicle designed for all options even after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and robust phenolic resin plywood with an anti-slip surface. • Front floor storage box with lock and spring-assisted lid • Pattern of holes for wheel tracks made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible lashing options as well as perfect grip. • Side panels color: black • Frame completely hot-dip galvanized • Easy-to-extend, roller-mounted (Easy-Glide) loading ramps (2000 mm) ensure an extremely flat loading angle • Fold-out, spring-assisted support legs complement the extendable ramps. Can be folded in and out with your foot within seconds • Rear supports with dual function: When unfolded, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse driving automatic • ALKO overrun device and parking brake Bdodpfx Aezy A Nxsl Aeh • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar REINFORCED • 13-pin connector • Reversing light • Large LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net price: €8,340.34 / Gross price: €9,925.00 Article number: A3T235552100.03 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 0 cm • External dimensions (LxWxH): 722 x 249 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 915 kg • Payload: 2,585 kg • Chassis: Low-loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low-frame design enables an extra-low loading height of 520 mm • Very stable steel frame, welded • Vehicle can be fitted with all options after purchase: enormous potential for retrofitting: Hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading platform made of durable and robust phenolic resin laminated wood with a non-slip surface. • Front floor storage box, lockable with spring-supported lid • Pattern of holes for securing straps made of galvanized steel • Numerous lashing points and a high-load-bearing floor offer flexible securing options as well as perfect grip. • Side panels, color: red • Frame completely hot-dip galvanized • Easy-to-extend, roller-mounted (Easy-Glide) ramps (2000 mm) ensure an extremely shallow approach angle • Fold-out, spring-supported support feet complement the extendable ramps. Can be folded in and out with your foot within seconds • Rear supports with dual function: When folded out, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse assist • ALKO overrunning device and parking brake • Towing head made of steel casting with integrated high-security ALKO lock • Very stable V-shaped drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, durable, and reliable. • Robust protection of the taillights • Integrated rear fog light • Support wheel in the middle • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ Bodozy A Hdepfx Al Aedh - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net: €5,693.28 / Gross: €6,775.00 Article number: A3T227451900.03 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 450 x 190 x 0 cm • External dimensions (LxWxH): 620 x 229 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,700 kg • Unladen weight: 755 kg • Payload: 1,954 kg • Chassis: Low loader (wheels next to the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low-frame design enables an extra low loading height of 520 mm • Very stable steel frame, welded • Vehicle is also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and resilient phenolic resin laminated wood with an anti-slip surface. • Front storage box with a spring-assisted lid • Pattern of holes for securing load made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible securing options and perfect grip. • Side panels color: red • Frame completely hot-dip galvanized • Easily extendable, roller-bearing ramps (2000 mm) ensure an extremely flat approach angle • Fold-out, spring-assisted support feet complement the extendable ramps. Can be folded in and out within seconds with your foot • Rear supports with dual function: When folded out, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse assist • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar, REINFORCED Bedozy Auhspfx Al Aedh • 13-pin plug • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about any specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - official dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Bodpfszzairex Al Aedh Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle