Used Cooling Evaporator for sale (7,840)

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Bwjdpjzi Tmasfx Ab Det Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original. Bwedpfx Aeyvrvpob Det

Condition: as good as new (ex-display), Falling-film evaporator – unused – Bwjdpfx Asd Hb Acob Dst The machine consists of three units that need to be connected in series: - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: used, Item: A-9600-GEA-APV-Evaporator Used Evaporator Price by GEA & APV (SPX) Bodpfx Ajvi Razjb Dowt Capacity 7.000 L & 12.000 L Dismantled, moved to stock

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Bjdspu R Ncspfx Ab Dswt Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Bwedpfx Asvw A T Nob Dst Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Bedpfey Sf Ukex Ab Djwt Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Bwsdpfxorlk Dcj Ab Djt

Condition: used, Used Helpman LEX 22 evaporator on Freon with electric defrost. Complete with 2 ATB RFT0,25/4-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 9.320 m³/h. Bwodpfjrlk Dyjx Ab Det

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Temperatures: -6.7 °C/+35 °C. Bwedpfx Aoxz Ex Ssb Djt Speed: 2,950 rpm Refrigerant type: R507. Feel free to contact us for more information!

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PJV111654, overall weight: 536 kg, total length: 6,500 mm, total height: 700 mm, total width: 1,050 mm, lamellar spacing: 7 mm, cooling capacity: 63.2 kW (85.93 HP), Used Goedhart VNS 66507 G evaporator on Freon with hot gas defrost. Complete with 6 Ziehl-Abegg fans - 50 Hz - 0,83/0,55 kW - 1330/940 RPM - diameter 500 mm and a total air flow of 42.380 m³/h. Bodpfov Ua Uxox Ab Dewt

Condition: used, Year of construction: 2007, Used Goedhart ZFB-1125612 evaporator on NH3 with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 19.200 m³/h. Bjdpfx Aorlk Dgob Djwt

Condition: used, Year of construction: 2001, Used Helpman THOR 254-8-BH evaporator on Freon with hot gas defrost. Complete with 5 ATB AFT71/4A-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 450 mm and a total airflow of 26.300 m³/h. Bwedpferlk A Usx Ab Dot

Condition: used, Year of construction: 2007, Used Kuba SGL 56-F62 evaporator on Freon with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 15.800 m³/h. Bsdpfx Aborlk Dks Dowt

Year of construction: 2012, condition: used, functionality: fully functional, Reisner KWR-S 100 HK cooling system Water Temperature 12-16°C Cooling capacity 120kW Winter relief Technical data Chiller KWR-K 100 KS/ Compressor: Piston compressor Bwjdjzh E Awopfx Ab Dst Volume flow: 110 m³/h Refrigerant: R407c Speed: 1,450 rpm Cooling capacity: 112 kW Power consumption: 37 kW Coefficient of performance 3.5 (average) Evaporating temperature +7°C Condensation temperature 45°C Operating voltage 400 V-3 PH-50 Hz Cooling capacity (dry cooler) 150 kW Air inlet temperature 35°C Maximum air inlet temperature 45°C Air volume flow 45,600 m³/h Number of fans 4 Current draw per motor 7.2 A Power consumption per motor 0.9 kW (controlled) Operating voltage: 400 V-3 PH-50 Hz Sound pressure level 65.7 dB (A) at 10 m Device length: 5,350 mm Device width: 1,123 mm Device height: 1,150 mm Empty weight: 418 kg

Year of construction: 2015, condition: used, Damage: none Bodpfxjw Igp Hs Ab Djwt

Condition: new, Year of construction: 2023, Buhler Cooling Die Polycool 1000, designed for meat analogues. New in box. Bodsxw Ebfjpfx Ab Djwt

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Bodpfx Ajzbau Nsb Dewt

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2003, total length: 11,240 mm, total width: 1,900 mm, wheelbase: 880 mm, color: other, Year of construction: 2003, = Additional options and accessories = - Spare tire = Remarks = Damages: none XL919629135075522 = More information = Empty weight: 4.900 kg Carrying capacity: 3.100 kg GVW: 8.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: OH-15-HL = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Bwodpfx Aeynh Ikob Dst Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 1,155,091 km, power: 345 kW (469.07 HP), first registration: 03/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 6,000 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 10,120 mm, total width: 2,600 mm, Year of construction: 2017, Tail lift: dhollandia, slider lift, 1500 kg YV2RTY0A6HB809434 Cool unit brand: TRS = More information = Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Weights Empty weight: 12.745 kg Bwjdpfx Abeymrtbe Djt Carrying capacity: 7.755 kg GVW: 20.500 kg Functional Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: 72-BJJ-3 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2019, Speck Anlagentechnik Speck pumping station, SPH-R-055-2 DR control system including 2 IN-VB 25-30F 11-E 3A5-055 centrifugal pumps and 2 RTG actuators + Frame and 2 2-inch stainless steel manifolds (supply/return) + 3000L tank (2 chambers) + Complete 2-inch stainless steel piping + All sensors and actuators/valves/sensors + Optional: approximately 250m of 2-inch hose including quick-release couplings and shut-off valves Pumps were dismantled in working order. Bsdpfxjwi Icxe Ab Djwt Dismantled and packed on several pallets. Systems new price: €85,000. Item location: 75053 Gondelsheim. Used condition, see pictures. Shipping via freight forwarder or pickup by appointment.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0M001224, Le compresseur Frascold Q Series Q5-28.1E est une solution fiable et efficace pour diverses applications industrielles et commerciales. Conçu avec une ingénierie de précision, ce compresseur offre des performances et une durabilité exceptionnelles. Que vous en ayez besoin pour la réfrigération, la climatisation ou d'autres systèmes de refroidissement, le Q5-28.1E garantit des résultats constants. ➢Points forts du produit : Options de tension polyvalentes : Le Q5-28.1E est compatible avec différentes configurations de tension, notamment 220 v-240 v/380 v-420 v/3 phases/50 hz et 265 v-290 v/440 v-480 v/3 phases/60 hz. Cette flexibilité garantit une intégration parfaite dans votre installation existante. Construction robuste : avec un poids net de 79 kg, le Q5-28.1E est robuste et conçu pour résister aux environnements exigeants. La construction robuste garantit une longue durée de vie et un fonctionnement fiable. Dimensions compactes : Avec des dimensions de 449 mm (L) x 286 mm (l) x 328 mm (H), ce compresseur est peu encombrant. Il s'intègre dans les petits espaces sans compromettre les performances. ➢Spécifications : Bwodpfxsr Id T Aj Ab Dot Frascold Q Series Q5-28.1E compressor comes with: Voltage: 220v-240v/380v-420v/3ph/50hz - 265v-290v/440v-480v/3ph/60hz Net Weight: 79kg Dimensions: 449 (L) x 286 (W) x 328 (H) The Frascold Q Series Q5-28.1E compressor combines versatility, durability and a compact design, making it an excellent choice for your refrigeration system. Whether you're upgrading an existing system or starting a new project, this compressor delivers exceptional performance. Rely on Frascold's reputation for quality and reliability.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0G000072, The Frascold Q5-21.1Y compressor is a reliable, high-performance solution for a variety of industrial and commercial applications. With an impressive flow rate of 21.18 m3/h, this compressor guarantees efficient cooling and refrigeration processes. Whether you work in HVAC, cold storage or food processing, the Frascold Q5-21.1Y delivers exceptional performance. ➢Product highlights: ✓Powerful performance: The Q5-21.1Y boasts a maximum power consumption of 6.6 kW, making it a suitable choice for demanding applications. ✓Optimal Oil Management: With a 1.6-liter oil charge, this compressor ensures smooth operation and long service life. Bwedpfx Abor Id Tqj Dot ✓Rugged construction: the Q5-21.1Y is built to last, with dimensions of 449 mm x 286 mm x 325 mm and a weight of 79 kg. Its solid design stands up to the rigors of industrial environments. ✓Versatile connections: The suction connection is 1 1/8", and the flow is 3/4", allowing easy integration into existing systems. ➢Specifications: Compressor Frascold Q5-21.1Y, discharge: 21.18 m3/h, maximum power consumption: 6.6 kW, oil charge: 1.6 l, connection: suction 1 1/8 inch, discharge 3/4 inch, dimensions (length x width x height) 449 x 286 x 325 mm, weight: 79 kg` Price without VAT.

Condition: as good as new (ex-display), Heat exchanger, cooling condenser, Güntner heat exchanger, GVV050.1A/1-X.E, used machine Manufacturer: Güntner Type: GVV050.1A/1-X.E Bodpfezk A Upjx Ab Dowt Year: 2016 Overall dimensions: 1050 x 460 x 820 mm Fan size: 830 x 680 mm Cooling surface: 875 x 810 mm

Condition: excellent (used), 457 USED Ventilation, ventilation ducts, and air exchange in a bread cooling room. Bsdjzlnhqepfx Ab Dswt The device is used to cool bread and exchange air in a bread cooling room. DIMENSIONS OF THE ROOM IN WHICH IT WAS OPERATED (in cm): - W: 820, - L: 1300, - H: 430. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.