Used Diethei Pd 100 for sale (23,441)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Credpfx Ajy Hkfdoc Nob Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Cedpfx Acjy Hkd He Njrb Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Csdpoy Nynaefx Ac Norb You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, mileage: 72,072 km, power: 75 kW (101.97 HP), first registration: 10/2022, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2022, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional options and equipment = - Spare key - Speed limiter - Reversing camera - Stability control - Alternating current Crjdpfx Aey Ik N Soc Neb = Notes = Car-Pass URL: Car-Pass ID: ccdee4be-31bb-48ae-a820-8a7dab568c2e = Further information = Tyre size: 205/60R16 Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tyre tread left: 8 mm; Tyre tread right: 8 mm Rear axle: Tyre tread left: 6 mm; Tyre tread right: 7 mm Unladen weight: 1,479 kg Payload: 911 kg Gross vehicle weight: 2,390 kg Damage: none

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) Cjdpfxsy Nkwle Ac Nsrb • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: good (used), mileage: 156,814 km, power: 110 kW (149.56 HP), first registration: 10/2018, fuel type: diesel, wheelbase: 3,000 mm, fuel: diesel, fuel tank capacity: 70 l, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 4,900 mm, total width: 1,900 mm, total height: 1,970 mm, permissible axle load (axle 1): 1,600 kg, permissible axle load (axle 2): 1,550 kg, Year of construction: 2018, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, soot filter, tire pressure monitoring, traction control, = Additional Options and Accessories = - Alarm system - Armrest - Steering wheel audio controls - Exterior mirrors with indicator lights - Automatically dimming interior rear-view mirror - AUX input - Outside temperature display - Phone holder - Passenger airbag - DAB radio - Rev counter - Third brake light - Driver airbag - Height-adjustable driver’s seat - Remote central locking - Tinted glass - Rear doors - Height-adjustable steering wheel - Height-adjustable front seats - Cab - Folding exterior mirrors - Air conditioning - Comfort seats - Leather steering wheel - Alloy wheels - 18-inch alloy wheels - Metallic paint - Multifunction steering wheel - Rear parking sensors - Front parking sensors - Particulate filter - Radio/CD player - Disc brakes - Headlight height adjustment - Side door - Starter interlock - Body-coloured bumpers - Partition wall - Immobilizer - Partition wall without window = Additional Information = General Information Cab: single Crjdpfsy It Rfsx Ac Nsb Technical Information Number of cylinders: 4 Engine displacement: 1,968 cc Maximum front axle load: 1,600 kg Maximum rear axle load: 1,550 kg Weights Empty weight: 1,857 kg Payload: 943 kg Gross vehicle weight: 2,800 kg Functionality Body brand: DSG Interior Upholstery: leather Maintenance APK (general technical inspection): valid until 11/2026 History Booklets: available (dealer maintained) Condition Technical condition: good Optical condition: good Damages: none = Company Information = Nidro cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The mentioned price is the 'internet take-away price'. For questions or to schedule a test drive, please contact us: VIEW OUR ENTIRE STOCK AT All types of trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, mileage: 101,692 km, power: 228 kW (309.99 HP), first registration: 12/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2007, Equipment: ABS, air conditioning, crane, = Additional options and accessories = - Tipping hydraulics = Remarks = Crane Rotator: ✓ Squeeze Box: ✓ = More information = Crsdpfsy Ip Dbjx Ac Nsb Front axle: Steering Rear axle: Double wheels Crane: TLC 105.2, behind the cab

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Year of construction: 2021, operating hours: 3,559 h, Equipment: air conditioning, General information Year of manufacture: 2021 Technical information Number of cylinders: 4 Drive: Wheel Cedpfxsy Itygj Ac Norb Engine type: Perkins 904J-E28T Empty weight: 10.373 kg Dimensions (LxBxH): 680 x 245 x 298 cm Functional Mast: articulated arm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Blower - Front View Camera - Hammer/sorting function - Hammer function - Hydraulic quick coupler - Rotation function - Sliding leaf - Support legs = Remarks = Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Austria Powertilt and 3 digging buckets, 4-wheel steering, 30 km/h

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Crodpfovn S I Dsx Ac Njb Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) Cedpfxewnprxe Ac Nerb number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Codpfx Acjy Ihbxo Nsrb Includes welding head, hoses, and control cabinet. 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Options: with SAFETY gates !! Credpfx Acsy Itp Is Njb

Condition: good (used), Year of construction: 1995, Used Colchester CNC lathe Type: Tornado 100 Max turning diameter: 420 mm Max turning diameter over support: 297 mm Max working diameter: 186 mm Max turning length: 350 mm Drive power: 5.5/7.5 kW Spindle bore: 61 mm 12-position tool changer with VDI 3425/Round 30 Fanuc O-T control Year of manufacture: 1995 Incl. tool holder Credpfx Asy Atq Ijc Nsb Excl. tools

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Throat depth: 510 mm Press force: 60 tons Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Cedpfxsy N Ac Hs Ac Njrb Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,000 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: Hydraulic straightening press MAE Type HY – S 100 RH Year of manufacture: 1980 Inspected according to UVV Stroke: 500 mm Press force: 100 t Table: 4000 x 500 mm Codsy Nz S Topfx Ac Nsrb Complete with straightening unit Weight: 5700 kg Price: EUR 6,000 plus VAT, ex location Hamburg

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers Cedpewka S Isfx Ac Nerb - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: good (used), electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 100 LT6 Cedey D Ikxepfx Ac Njrb -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Protection rating: IP54 -Design: B3 -Dimensions: 365/250/H210 mm -Weight: 23 kg

Condition: good (used), Working width: 960 mm 1 combined unit Shaft diameter: 160 mm Processed material height: 160 mm Cjdpfoy Izlqox Ac Nerb Abrasive belt dimensions: 990x1800 mm Extraction port diameter: 140 mm Electric lift Digital display Safety switch Main motor power: 11 kW Voltage: 380V Overall dimensions: Length: 1550 mm Width: 1680 mm Height: 2200 mm

Condition: new, Year of construction: 2025, pressure 100 t stroke 380 mm table surface area 1100x424 mm Crjdpfx Aoxu Nv Ioc Nsb dayligth 180/750 mm distance between columns 1100 mm diameter of piston 90 mm

Condition: used, Year of construction: 2009, Charger Credpfxsync S De Ac Nsb

Condition: used, Charger Codjync Tuepfx Ac Norb

Condition: used, Year of construction: 2009, Charger Crjdpoync Swsfx Ac Nsb

Condition: excellent (used), Working height: 100 mm Cjdpfjydbfhox Ac Norb Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Required space: 500 x 600 mm

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) Crodey Alp Aspfx Ac Njb electrical power : 5,5 kW dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: good (used), mileage: 150,113 km, power: 400 kW (543.85 HP), first registration: 10/2020, fuel type: electric, axle configuration: 6x2, wheelbase: 44,950 mm, fuel: electricity, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2020, Equipment: central locking, cruise control, = Additional Options and Accessories = - Rear work lights - Front work lights - Windscreen - Enclosed cab - Cab - Automatic heating system = Notes = Volvo FE Electric - 6x2*4 - BDF - Full Air - 100% Electric - Low Mileage MY: 26-10-2020 KM: 150,113 YV2VB40C9LZ132195 100% Electric - Zero emission BDF Cjdey Hrwbepfx Ac Norb Full air suspension Rear steering axle Alloy wheels Low mileage = Further Information = Front axle: Max. axle load: 8,000 kg; Steered Rear axle 1: Twin tires; Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 7,500 kg; Steered Unladen weight: 9,825 kg Payload: 17,175 kg gross vehicle weight: 27,000 kg Technical condition: good Visual condition: good Please contact VAEX The Truck Traders for more information.