Used Doosan Puma 2000Sy for sale (353)

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 630 mm, total length: 979 mm, total width: 434 mm, Tested forklift battery for your forklift - 48V 4PZS 500Ah - special battery tray + 1 year warranty + includes aquamatic system + includes final discharge cable & REMA 320 plug (other connectors can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length 979 mm Width 434 mm Height 630 mm Weight: approx. 750 kg Suitable for the following models and others: Still R 20-14 Jungheinrich ETV A 12.5 Toyota 2FBE15 Toyota 5FBE15 Toyota 5FBE18 Toyota 7FBE10 Toyota 7FBE15 Toyota 7FBRE16 Toyota 8FBE15 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota FTB15-E2S Toyota/BT RR-B 2 Toyota/BT RR-B 3 Toyota/BT RR-M 14 Toyota/BT RR-M 3 Toyota/BT RR-M 6 Toyota/BT RR-N 3 Crown 3.0 Crown SC 4220 Crown SC 5320-1 Crown SCT 6020 Atlet ET 150 Atlet ET 180 Balkancar EV698 CTC PLANET PL416/420/423 Caterpillar EP15CPDJ Caterpillar EP15PNT Caterpillar EPB4A Daewoo B13 Daewoo B13 T-2 Daewoo B15 Daewoo B15 T Daewoo B15 T-2 Daewoo B15 T-5 Daewoo BT15 Datsun 150 Doosan B13T Doosan B157-5 Doosan B15T-5 Doosan B15T-7 Doosan B20T-2 Heli CPD 15 Heli CPD 18 Heli CPD 25 Hubtex MQ 35 Hyster J1.80-2.00XMT Hyundai 15BT-7 Hyundai 15BT-9 Hyundai 16B-9 Hyundai 16B-9F Hyundai 20BRJ-7 Hyundai 25BRJ-7 Hyundai HBT18T-S Komatsu FB15-12 Komatsu FB15M-2 Komatsu FB18 Manitou ME 313 Manitou ME 315 Mitsubishi FB13PNT Mitsubishi FB15PN Nichiyu FBT13 Nichiyu FBT15-30 Nichiyu FBT18 Nichiyu FBT20PN Nissan 01L150 Nissan 1N1 TX Nissan 1N1L18HQ Nissan 1N1L18Q Nissan A1N1L18Q Nissan N01L150 Nissan N01L15U Nissan TX15 Nissan TX18 Nuova Detas SE 315 OMG ERGAS 16 TA 4 TCM FTB18-E1 UniCarriers TX3-15S Yale ERP 16 ATF Gbjdpsy Rnkfsfx Al Sju Yale ERP 18 ATF Common battery sizes available – please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 900 mm, total length: 2,020 mm, total width: 430 mm, Tested forklift battery for your truck - 80V 5PZS 775AH - Special container + 1 year warranty + incl. Aquamatik filling system + incl. end discharge resistor & REMA 320 connector (other connectors can be supplied on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 2,020 mm Width 430 mm Height 900 mm Weight: approx. 2,030 kg Suitable for the following models and more: Still MX-X Jungheinrich EFG 430 Jungheinrich EKX 515 Toyota FBMF30 Baumann EMS 65-70 Caterpillar EP25N Caterpillar EP30KPAC Caterpillar EP35KPAC Caterpillar FB30 PAC Caterpillar FB35K PAC Cesab 5 Daewoo B22/35 X-5 Daewoo B30 X Daewoo B30 X-5 Daewoo B30 X-7 Daewoo B30 X-RW Daewoo B30/32 X Daewoo B35 X-7 Doosan B30X5 Gbedpfxey Rnp Ue Al Ssu Doosan B35X-5 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 50 Hubtex MQ 60 Hyundai 30BH-9 Hyundai 30BHA-7 Hyundai 50B-9 Kalmar ECD 40-5 Kalmar EFY 50 Kalmar EFY 60 Mitsubishi FB25N Mitsubishi FB30 Mitsubishi FB30AN Mitsubishi FB30K PAC Mitsubishi FB35AN Nissan QX30 Common battery sizes available, please inquire. Transport available.

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 3,000 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 30,000 W, total height: 2,240 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 18T-C / 16T-C, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details. Working capacity: • Swing over bed: 700 mm • Swing over saddle: 480 mm • Recommended machining diameter: 315 mm • Maximum machining diameter: 460 mm • Maximum machining length: 1,050 mm • Draw tube diameter: 91 mmAxis travel: • C: 360° (indexing increment 0.001°)Main spindle: • Chuck diameter: 304 mm • Spindle nose: ASA A2-8 • Spindle bore: 102 mm • Front spindle bearing diameter: 160 mm • Spindle motor power: 22/30 kWTool turret: • Tool holder type: VDI 50 • External tool height: 25 mm • Maximum boring bar diameter: 50 mm • Turret indexing time: 0.25 sDriven tools: • Speed range: 30–3,000 rpm • Motor power: 3.7/5.5 kW • Maximum collet capacity: 25 mm • Maximum tapping capacity: M20Feed rates: • X-axis rapid traverse: 16,000 mm/min • Z-axis rapid traverse: 20,000 mm/min • X-axis feed motor power: 3.8 kW • Z-axis feed motor power: 5.0 kWTailstock: • Quill diameter: 120 mm • Quill taper: MT6 • Quill travel: 120 mmElectrical data: • Power requirement: 50 kVA • Coolant pump power: 0.24 kWFloor space: 3,890 × 2,390 mm Technical Specification Gbodpsztyh Sjfx Al Ssu Counter Spindle No Driven Tools Yes

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 38 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,500 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, USB port, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Gedpszwk R Sofx Al Ssbu Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: excellent (used), Loading and unloading robots from HALTER; Former demonstration unit for turning machines from DN Solutions (formerly DOOSAN); Gedpfoz Ipmqex Al Sobu Dual-arm gripper for raw and finished parts; Can be set up very quickly thanks to the software; Parallel tool changing possible during main machining time; AS GOOD AS NEW!!!!!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, load capacity: 25 kg, arm reach: 1,500 mm, For sale is a Doosan Robotics H2515. The robot was purchased in October 2024 and is being sold due to the closure of the business. Gbodpfoz Hm I Aox Al Sou The robot is in new condition and has not yet been used. Reach: 1,500 mm Payload: 25 kg Repeatability: 0.1 mm Weight: 72 kg An inspection or collection is possible by prior arrangement.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 11906001, load capacity: 10 kg, arm reach: 1,300 mm, teach pendant manufacturer: Teach Pendant, Equipment: documentation/manual, Doosan M1013 Cobot NEW, 0 operating hours + Teach Pendant + 2x OnRobot 3FG15 + Dual Quick Changer Description Doosan Robotics M1013 Cobot – NEW – 0 operating hours – including Teach Pendant & 2x OnRobot 3FG15 and Dual Quick Changer. Doosan M1013 complete package – manufactured in 2023 – unused. For sale is a Doosan Robotics M1013, manufactured in 2023, in new and unused condition. The robot has not been put into operation and has 0 operating hours. The components are in their original packaging or in very good condition. Included in the scope of delivery: Doosan Robotics M1013 Cobot Doosan Teach Pendant Doosan Control Box all necessary connection cables original packaging programming/operating manuals Gbodpfezx T Atsx Al Sju 2 x OnRobot 3FG15 grippers OnRobot Dual Quick Changer suitable accessories and mounting material Thus, a complete package for professional automation applications is offered. The M1013 is suitable, for example, for: Machine loading Pick & Place Assembly operations Handling Parts feeding Quality control flexible automation of production processes Technical data Manufacturer: Doosan Robotics Model: M1013 Year of manufacture: 2023 Condition: New / unused Operating hours: 0 Payload: 10 kg Reach: 1,300 mm Axes: 6

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. Gbodoz Apb Tjpfx Al Sju -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: good (used), Year of construction: 2011, functionality: fully functional, DOOSAN DNM 400A – CNC vertical machining center, FANUC, year 2011 We offer for sale a DOOSAN DNM 400A CNC vertical machining center, equipped with a reliable DOOSAN-FANUC i Series control system. Gedpfx Alez Dq Iuo Ssbu The machine is currently in operation and can be demonstrated and tested upon prior arrangement. Technical specifications: Manufacturer: Doosan Infracore Model: DNM 400A Year of manufacture: 05/2011 CNC control: DOOSAN-FANUC i Series X-axis travel: approx. 762 mm Y-axis travel: approx. 435 mm Z-axis travel: approx. 510 mm Work table dimensions: approx. 920 × 435 mm Max. table load: approx. 600 kg Spindle taper: BT40 / ISO 40 Max. spindle speed: approx. 8,000 rpm Automatic tool changer Coolant system Power supply: 380 V Rated power: approx. 27.4 kVA Machine weight: 4,500 kg A universal CNC vertical machining center suitable for both single-piece and series production. The combination of a robust DOOSAN design and a FANUC control system ensures easy operation and good service availability. The machine is powered on and can be demonstrated in operation.

Condition: like new (used), Year of construction: 2020, machine/vehicle number: 12404, functionality: fully functional, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: AC, pressing force: 175 t, stroke length: 350 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, table width: 90 mm, table length: 3,650 mm, table height: 920 mm, throat depth: 450 mm, distance table to ram: 3,100 mm, clearance between the columns: 3,100 mm, retraction force: 15 t, oil tank capacity: 300 l, total length: 4,650 mm, total width: 2,000 mm, total height: 2,800 mm, overall weight: 14,250 kg, Equipment: safety light barrier, For sale due to fleet renewal: Synchronized Hydraulic Press Brake DENER PUMA XL 175/36, complete with MITSUBISHI hydraulic components and ESA S 675 W CNC control with 2D Graphic Touch Screen. Used machine in excellent condition, ready for use, and CE compliant. Available for inspection and testing at our facility. TECHNICAL SPECIFICATIONS AND FEATURES: • Brand and Model: DENER PUMA XL 175/36 (Mitsubishi Components) • Type: Synchronized hydraulic press brake • Controlled axes (6 axes): Y1 - Y2 - X - R + Z1 + Z2 • CNC Control: ESA S 675 W with 2D Graphic Touch Screen • Certification: CE PERFORMANCE AND CAPACITY: • Bending force: 175 tons • Usable bending length: 3,650 mm • Distance between uprights (shoulders): 3,100 mm • Daylight between tables: 600 mm (Increased) • Piston stroke: 350 mm (Increased) • Throat: 450 mm • Back gauge stroke: 750 mm • Work table height: 920 mm WORKING SPEED: • Axis X speed: 600 mm/s • Axis R speed: 300 mm/s • Approach speed: 160 mm/s • Working speed: 10 mm/s Gbedsz N Ev Espfx Al Ssu • Return speed: 140 mm/s TECHNICAL DATA AND DIMENSIONS: • Main motor power: 22 kW • Oil tank capacity: 300 liters • Total weight: 14,250 kg • Dimensions (L x W x H): 4,250 mm x 2,320 mm (1,720 mm without front bars) x 3,030 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Gbsdpfev Iq Ezex Al Seu Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. Gjdpfszw N E Ijx Al Ssbu The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2021. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 2 units available • CNC control: FANUC i Series (15" display, 2 MB program storage / up to 1,000 programs, Ethernet connection) • Rapid traverse X: 36 m/min • Rapid traverse Y: 36 m/min • Rapid traverse Z: 30 m/min • Spindle torque: 118 Nm Gjdpfxjz N E Dvj Al Sjbu • Through-spindle coolant: 12 bar • Coolant gun • Ball screw nut cooling • Tool breakage detection in the magazine • Automatic doors • Robot interface • Preparation for 4th axis • Coolant level sensor • Mist collector interface Additional equipment • LNS MH500 chip conveyor • Belt-type oil skimmer • HIWIN RCV 250 rotary table (4th axis) • HIWIN RTS 250 support (tailstock/support for 4th axis) • Hydraulic unit 200 bar, 2 A+B • Hydraulic fixture support for 4th axis • Seat air check Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Gsdpfjzilupex Al Sjbu Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 5700 was manufactured in 2021, 3 units available. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 3 units available • Condition: Excellent (used) • Functionality: Fully functional • 15" display • 2 MB part program storage / 1,000 programs • Rapid traverse X-axis: 36 m/min • Rapid traverse Y-axis: 36 m/min • Rapid traverse Z-axis: 30 m/min • Spindle torque: 118 Nm Gjdpfx Aez I Tkgol Sjbu • Through-spindle coolant: 12 bar • Ethernet connection • Ball screw nut cooling • Tool breakage detection in magazine • Automatic doors • Standard-height column • Hydraulic system 3A + 1B • Seat air check • Coolant level sensor Additional equipment • Robot interface • 4th axis • Hiwin RCV 250 rotary table • HIWIN RTS 250 support • 4th-axis fixture support hydraulic • LNS MH500 chip conveyor • Oil skimmer, belt type • Coolant gun • Mist collector interface Technical Specification Taper Size BT 40

Condition: new, Year of construction: 2023, DN Solutions LYNX 2100M New machine, never used! 0 operating hours. Technical data: Control: Fanuc 0i-F Plus iHMI-Touch Milling function with C-axis and powered tools (6000 rpm) Bar capacity (mm): 65 Tool holder: BMT45 Turret with 24 positions Max. turning diameter (mm): 300 Max. turning length (mm): 290 Godoz Hxz Uepfx Al Ssbu Main spindle chuck size: 8" (204 mm) Samchully Max. main spindle speed (rpm): 4500 Main spindle power (kW): 15 Main spindle torque (Nm): 169.0 Travel ranges: X: 205 mm Z: 340 mm Linear guide -CNC tailstock -Tool probe -Parts catcher -Number of powered tools: 4 pcs, 2/2 -Number of standard tools: 8 pcs -Documentation -Knoll chip conveyor, ejection at the front on the right side Dimensions: Length: 2350 mm | Width: 1595 mm | Height: 1693 mm | Weight: 3170 kg

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,235 h, Internal combustion forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8235 Own weight (kg): 12197 Load capacity (kg): 9000 Gjdpfxsz E S Eqo Al Sobu Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel Recently underwent a major technical inspection at 8060 operating hours. - new tires - new forks - cylinder regeneration - transmission: discs + seals - brakes: discs and bearings - all oils, fluids, and filters Technical condition: used, good

Condition: used, Year of construction: 2012, operating hours: 8,501 h, Equipment: all wheel drive, MAKE: DOOSAN TYPE: DX140 LCR YEAR: 2012 CE MARKED: YES OPERATING HOURS: 8501 HOURS TYRES/UNDERCARRIAGE: 50% POWER: 74KW ENGINE: CUMMINS QSB 4.5 WEIGHT: 14,800 KG OPTIONS: TRACK EXCAVATOR Gbsdpozg Sfijfx Al Ssu BLADE VA BOOM WORK LIGHT HAMMER LINES SORTING FUNCTION HYDRAULIC QUICK COUPLER AIR CONDITIONING KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 755 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, tire condition: 70 %, Equipment: 3rd hydraulic function, 4th hydraulic function, pallet forks, sideshift, Doosan D25G Year of manufacture: 2019 Hours: 755 Gjdpfxoz Dwzzs Al Sebu Diesel engine Triplex mast, side shift, and 4th hydraulic valve

Condition: like new (used), Year of construction: 2012, operating hours: 5,323 h, DOOSAN DNM 500 MACHINING CENTER CNC DOOSAN – FANUC i Series MANUAL GUIDE ONLY 5,323 CUTTING HOURS! YEAR OF FIRST INSTALLATION: 2012 TABLE SIZE: 1,200 mm x 540 mm TRAVELS: X: 1,020 mm Y: 540 mm Gjdjz Hyyrspfx Al Ssbu Z: 510 mm SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 INTERNAL SPINDLE COOLING / HIGH PRESSURE TOOL CHANGER: 30 POSITIONS NEW MIST EXTRACTION UNIT / AIR FILTRATION SYSTEM, TOP-MOUNTED, LOSMA BRAND CHIP CONVEYOR HIGH-PRESSURE PUMP WEIGHT: 7,000 KG COMPLETE DOCUMENTATION

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: I Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 6700L was manufactured in 2021. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700L vertical machining centre we have for sale. Contact us for further details. • Display: 15" • Program memory: 2 MB / up to 1,000 programs • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Automatic doors • Robot interface • Tool breakage detection in tool magazine • Ball screw nut cooling • Ethernet connection • Air clamp interface on table • Seat air check Gbedpfjz I S E Njx Al Sju • Coolant level sensor • Mist collector interface • Coolant gun • Condition: Used, excellent condition, fully functional and regularly maintained • Quantity: 4 units available Additional equipment • Chip conveyor LNS MH500 (right side) • Belt-type oil skimmer • Vacuum pump Technical Specification Taper Size BT 40

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 8,343 h, load capacity: 3,500 kg, lifting height: 4,900 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Gedjz N N Dtepfx Al Sjbu Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: Front forklift DOOSAN D35C-5 - 3.5 ton lifting capacity - Year of manufacture 2008 - Sideshift - TRIPLEX free lift mast - Overall height 2.34 m - Lifting height 4.9 m - 8,343 operating hours according to meter - 4-cylinder YANMAR diesel engine, 58 HP - Solid rubber tires approx. 90% - Full cab, heating, lighting system - mechanical version - good condition - PRICE: 12,500 EUR plus VAT. Sideshift, third valve, rear work lights, front work lights, partial cab, heating, full cab,

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz • Rated power: 40,61 kVA Gsdpozxy Ivefx Al Sobu • Transformer capacity: 5 kVA • Full-load current: 64,67 A • Short-circuit capacity: 10 kA Technical Specification Taper Size BT 40

Condition: excellent (used), turning diameter over cross slide: 300 mm, turning length: 510 mm, Model: 2100 LYB Control: Fanuc i Series Year: 2019 Turning Diameter: 300mm Turning Length: 510mm ‘X’ Axis Travel: 205mm ‘Y’ Axis Travel: 105mm Gedpfxey N Uqij Al Sjbu ‘Z’ Axis Travel: 560mm Spindle Speed: 4500 RPM Spindle Power: 15KW Spindle Torque: 169N-M Machine With: 200mm Power Chuck Driven Tools (1-AxiaL -1- Radial) Tool Eye Parts Catcher Filtermist Dimensions: 2880 x 1711 x 1921 High Weight: 3900 Kgs

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 6700 XL was manufactured in 2021. It features an impressive X-axis travel of 2,100 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a FANUC i-Series CNC control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700 XL vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent, used • Functionality: Fully functional • Display: 15" • Program storage: 2 MB / 1,000 programs • Rapid traverse X/Y/Z: 30 / 30 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ball screw nut cooling • Tool breakage detection • Automatic doors • Robot interface • 4th-axis preparation • Ethernet connection • Coolant gun • Coolant level sensor Additional equipment • HIWIN RCV 320 rotary table (4th axis) • HIWIN RTS 320 support (tailstock) • Hydraulic aggregate: 200 bar, 3 A+B • Hydraulic 4th-axis fixture support: 4x oil / 4x air; seat air check • LNS MH500 chip conveyor • Oil mist extraction system Gbedpez Ngy Eofx Al Ssu • Oil skimmer Technical Specification Taper Size BT 40